Latest rcc ramp Tenders | Government rcc ramp Tenders

Central Government/Public Sector

CTN :40105005

07 May, 2025 NA

Bilaspur - Chhattisgarh

Tender For corrigendum : repair of wetting units concrete structure of esp#2 at ntpc simhadri

CTN :40204237

09 May, 2025 3.11 Crore

Kangra - Himachal Pradesh

Tender For construction of rcc ramp and rcc underground fire tank along with pump house including fire fighting equipments in pump room, providing ei work for rcc ramp and shifting of mgps lies and electrical earthing etc. for shri g.s. bali mother and child hospital, tanda, distt. kangra (hp)

CTN :40194721

22 May, 2025 NA

Gwalior - Madhya Pradesh

Tender For supply of structural audit must be carried out by reps of engineering colleges , site visit and visual inspection of the oh tank at various location in domestic area , analysis of the existing structure by carrying out various non destructive tosting to identify defects and monitor damage , listing out observation related to cracking in concrete cover leakage and seepage , suggesting remedial measures for repairing of over head tank

State Government

CTN :40200910

07 May, 2025 42.35 Lacs

Ludhiana - Punjab

Tender For supply and installation of (01 no.) 60 mt (pit type) 12mx3m platform size weigh bridge computerized machinery and construction of civil work of weigh bridge foundation of pit type (12mx3m span), const. of civil work of weigh bridge rcc ramp of pit type (12mx3m), providing new main gate for 12mx3m span weigh bridge, const. of weigh bridge room size 12x10 and 12mx3m platform including machinery at sw raikot (unit-1). and supply and installation of (01 no.) 60 mt (pit type) 12mx3m platform size weigh bridge computerized machinery and construction of civil work of weigh bridge foundation of pit type (12mx3m) span, ramp,const. of weigh bridge room size 12x10 and 12mx3m platform size capacity 60 mt pit type, machniery with computer and other equipments as per design, drawings , specifications as of tender notice including civil work and electrical fittings of weighbridge room etc. as required at sw ludhiana-1 (gill road)

Corporations And Associations And Others

CTN :40200555

13 May, 2025 48.62 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi - supply & installation of open gym equipments under mplads funds for various locations of parks in municipal corporation of delhi, seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size), seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for a

State Government

CTN :39898671

14 May, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco-ktps-vii stage - tm- procurement of various t and p materials p electrode drying oven, capacity:5kg, model: arc-3101 (or) equivalent make: arcon (or) esab (or) ador fontech , screw extractor set, size:m3 to m25, spiral flute structure, left hand cobalt drill bits:16 nos multispline cobalt screw extractors : 13 nos spiral flute cobalt screw extractors: 6 nos model: exd35(or) equivalent along with carrying case make:snap-on (or) bosch (or) taberia , rotary hammer drilling machine with sds plus, hand operated, make:bosch model:gbh 4-32 dfr professional in carrying case with auxiliary handle along with one set of drill bits 6- 32mm (concrete) , 18v cordless impact wrench, model: gds 250li (or) equivalent make:bosch (or) hikoki (or) dewalt , impact wrench, 1"square drive along with 4 nos inlet bushing and 2 sets of throttle valve kit. model:cp-6920-d24, type: pneumatic make:chicago pneumatic ultimate torque: 2600 nm including all accessories , hand torque multiplier, range: max input:540 nm, max output: 2700 nm with offset and straight reaction arms range:max input:540 nm, max output:2700 nm accuracy: 4% output square:1" input square:3/4" multiplication ratio:5:1 weight:3.7kg reaction type: bar and cranked make: snap-on (or) bosch (or) mekaster , die set for outer threading; type: metric m6-m24 coarse and m6-m24 fine . material: hss; no of dies: 20; die sizes: coarse: m6 x 1.00, m8 x 1.25, m10 x 1.50, m12 x 1.75, m14 x 2.00, m16 ? 2.00,, ?18 x 2.50,, m20 x 2.50, m22 x 2.50, m24 x 3.00 fine: m6 x 0.75, m8 x 1.00, m10 x 1.25, m12 x 1.50, m14 x 1.50, m16 x 1.50, m18 x 1.50, m20 x 1.50, m22 x 1.50, m24 x 1.50, with die holder and the adaptor; material: hss , allen key, black finish 32 mm heavy duty material: make: taparia (or) snap-on (or) chromium vanadium steel dewalt (or) bosch torque wrench, 12-68nm,1/2" sq. drive make:taparia (or) mekaster (or) mac master , torque wrench, 135-675 nm,3/4" sq. drive make:taparia (or) mekaster (or) mac master , socket bit adapter,sq.drive, 1" (f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter,sq.drive, 1" (f) to 1/2"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive,3/4"(f) to 1"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , socket bit adapter, sq.drive, 1/2"(f) to 3/4"(m) material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m55x3/4"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch , impact socket bit, m70x1"sq.drive material: chromium vanadium steel make: taparia (or) snap-on (or) dewalt (or) bosch

corporations/Associations/Others

CTN :40189538

08 May, 2025 51.00 Lacs

Delhi - Delhi

Tender For dismantling of existing barricading (12m high at pkg vb, sarojini nagar, new delhi including removal of ms steel structure, corrugated profile sheets etc., demolition of pile caps and disposal transportation of concrete debris and dismantled material

Central Government/Public Sector

CTN :40192636

02 May, 2025 NA

Bhandara - Maharashtra

Tender For replacing damaged steel structure sections and refitting new sections along with allied concrete repair works at imb plant, dongri buzurg mine.