Latest rcc septic tank Tenders | Government rcc septic tank Tenders

CTN :41346646

22 Aug, 2025 NA

Dimapur - Nagaland

Tender For corrigendum : supply of title 6 bolt plogh 34 unf 70mm , title 17 element filter 125 micron torque 1520 mm , title 28 house 06vsphp 1910 mm , title 1 tooth bucket , title 12 plug megnetic 34 inch bsp , title 23 switch panel , title 7 bolt , title 18 door handle left side , title 2 both plough 34 inch unf70mm , title 13 gasket fuel level sensor , title 24 switch ignition , title 8 nut 3 by 4 , title 19 bush , title 3 nut 3 by 4 , title 14 cape fuel tank , title 25 arm wiper blade assory , title 9 tooth bucket , title 20 bush , title 4 side cutter left hand , title 15 bolt m12 by 40 , title 26 throtal cable assory , title 10 strainer fuel filter , title 21 rivet nut m8 , title 5 side cutter right hand , title 16 washer 13 mm 40mm 5mm , title 27 spring , title 11 washer bonded , title 22 grease high pressure ) /bid number : gem/2025/b/6538994 * /dated: 05-08-2025 & & / bid document 1 / 21

Corporations And Associations And Others

CTN :41399012

19 Aug, 2025 NA

Delhi - Delhi

Tender For supply of sanitary items for day to day maintenance by providing sanitary items at ward no.237 harsh vihar shah.n.zone - providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion,(i) single socketed pipes.12.41.2 110 mm diameter, providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall12.47.2 2 mm thick flat 15 mm nominal outer dia pipes, 20 mm nominal outer dia pipes, 25 mm nominal outer dia pipes, circular tank, providing and fixing white vitreous china water closet squatting pan (indian type) : orissa pattern w.c. pan of size 580x440 mm, providing and fixing ptmt bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms, providing and fixing ptmt stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms, providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.4.1 one urinal basin with 5 litre white p.v.c. automatic flushing cistern, 18.21 providing and fixing uplasticised pvc connection pipe with brass unions :18.21.1.1 15 mm nominal bore, 18.21.1.2 20 mm nominal bore, providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.17.18.1 10 litre capacity - white, providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap, 17.28 providing and fixing p.v.c. waste pipe for sink or wash basin includingp.v.c. waste fittings complete.17.28.1 semi rigid pipe17.28.1.1 32 mm dia each 90.95, 18.18 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :18.18.3 25 mm nominal bore, 18.12 providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc.external work18.12.1 15 mm dia nominal bore , 20 mm dia nominal bore, 18.12.3 25 mm dia nominal bore, 18.12.4 32 mm dia nominal bore, 18.46 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) :18.46.1 15 mm nominal bore, 18.46.2 20 mm nominal bore, 8.46.3 25 mm nominal bore, 11.37a providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete., 8.31 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting

CTN :41208739

23 Aug, 2025 4.01 Crore

Mumbai - Maharashtra

Tender For corrigendum : supply of three way valve control panel cooling unit , smps 240w 1/2ph 200-500vac/24vdc 10a marine dnv gl , transformer control 415/240vac 400va , hmi touch screen 7 carel w/ethp , relay with base 6mm 857-304 spdt 24 vdc , shock mount for ecp of 506kw ac plant , filter emc/rfi 8a 2ph 520/300vac hp , cb 2p 4a c curve 10kaic dr ul489 , ctrl c.pco carel - no lcd display , socket with industrial relay wago , cb 1 pole 1a c curve abb ul489 , cb 2p 3a c curve 10kaic dr ul489 , carel communication card modbus pcos004850 , electrical control panel for 506 kw ac mbc plant , abb thermo-magnetic mccb 400a t5 frame 65kaic at 480vac , expansion valve actuator , temperature gauge water line , sight glass for condenser , ball valve three way 3/ 4 letlock , special tools set , general purpose maintenance tool sets , impellors sw pump , impellors cw pump , set of bearing of cw pump , set of bearing of sw pump , charging set , communication cable between compressor and controller , set of all indication lamps , schrader valve , contactor 3rt2015-1ap01 , shock mount akcc-25i make-resistoflex for panel cooling unit , set of all gaskets , relay with base 788-516 dpdt 230 vac , emergency stop , temperature transmitter m1a1-51-lp-c-s-023-n make-intempco , sea /chiled water pump soft startr protectn fuse semicond , soft starter 3rw4047-1bb14 , contactor for sea/chilled water pump , emc fan with filter 230m 3 /h 230v 50/60hz , emc fan with filter770m 3 /h 230v 50/60hz , shock mount -pd-p5d resistoflex , relay with base 788-312 dpdt 24 vdc , thermostat , three way motorized valve gun metal 125nb , filter emc/rfi 230a 3ph 480vac hp class b , ln reactor 250a 5% 480v marcus , 250a 3p mccb 25kaic 480vac xt4frame abb , mpu for sea water pump(pump protection relay) , button push green with led lamp 2alrf3l 230v ac , button push red with led lamp 2alrf4l 230v ac , rubber expansion bellow size 125nb , gasket set of 506kw ac plant , set of all electronic cards of mbc , set of soft starters for compressor and pumps , mpu for chilled water pump(pump protection relay) , refrigeration line flange gasket set , evaporator inlet and outlet flange gasket , condenser water inlet and outlet flange gasket , compressor gasket o ring , sea water pump o ring , chilled water pump o ring , rotolck vlv o ring condnsr in out lvl guage motr coling lin , relay/ contactor set (one of each type) , pressure transmitter set (one of each type) , temp sensor and transmitter set (one of each type) , serial driver module , bmcc module , gasket set for evaporator , temperature gauge compressor suction , gasket set for condenser , plate heat exchanger cbh16-17h make-alfa laval , ball valve ss316 two way 3/ 4 , pressure gauge range for sea/ chilled water pump 0 to 10 bar , expansion tank inox pro-z8 make-zilmet , pwm module , sightglas 1 1/ 4npt male witoutindcatr clear glas for evprtr , solenoid valve coil(240v) , solenoid valve liquid line , temperature gauge compressor discharge and liquid line , temperature transmitter sea chilled water inlet/outlet temp , pressure switch high , pressure switch low , presure transmitr chilled condnsr water inlet/outlet presure , sight glass liquid line & float line , drier core for liquid line drier , vent valve /chemical cleaning valve , drain valve /angle valve , ball valve ss316l three way 1/ 4 , differential pressure gauge 0 to 2 5 bar , discharge pressure gauge compressor 1 range -1 to 24 bar , suction pressure gauge compressor 1 range -1 to 15 bar , ball valve brass three way , drier for liquid line (filter drier core - lri line) , rubber expansion bellow size 150nb for condenser , sea / chilled water flow switch , level sensor , angle valve 1/2nptx1/ 2flare compressor motor cooling line , ball vlv for liquid linebrass gbc28s 1 1/8 /54s 2 1/8 (009l7 , sight glass compressor motor cooling line , diff presure transmitter condenser evprator inlet and outlet , ball valve (liquid line ) , ball valve (stagging/mcc line)

CTN :41375517

01 Sep, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of development of multipurpose test bench for testing of hydraulic pumps e e - hydraulic oil tank one twenty litre capacity , electric motor twenty five hp of one thousand four hundred forty rpm , hydraulic cylinder , direction control valve , relief valve , oil temperature monitor , pressure gauge one gauge for pump pressure comma two gauge for operating pressure , electrical panel , digital pressure gauge , motor rpm digital , suction pressure gauge , accessories suction filter comma return line filter , pump flow meter , pressure switch , labour comma fitment comma misc , hydraulic pump for neutral position calibration , extra valves , hydraulic circuit for high pressure testing upto eight thousand five hundred psi , frequency drive for adjusting of rpm for variable speed level , servo valve operating system , additional items mounting comma nipples comma connectors comma nozzles

CTN :41011322

16 Aug, 2025 NA

Ri Bhoi - Meghalaya

Tender For bid to ras supply of ply wood commercial as per is-3003 l 8ft w 4ft thickness 12mm bwr , mirror looking l 20 inch w 16 inch with pvc frame , bathroom cabinet mirror pvc , plywood commercial l 7 ft w 3ft thickness 12 mm bwr , kitchen sink 36 inch 18 inch 7 inch stainless steel with drainage board , plywood commercial l 8 ft w 4ft thickness 4 mm , bib cock cp 15 mm , cp health faucet with hook and 1 mtr tube15mm , pillar cock fancy type 15 mm cp , bib cock cp long body 15 mm , cp angle cock 15 mm , bib cock brass 15mm , flushing cistern pvc low level 10 ltr capacity complete , kitchen rack s s l 24 inch w 30inch d 10inch , stop cock brass 15 mm external thread , bitumin felt l 20 mtr w 1 mtr 3 mm thick , float valve pvc 20 mm , pvc pipe 40 mm 3 mtr long , cp tubular towel rail 20 mm dia 600 mm long body , glass shelf straight 20 inch with cp railing 15mm , glass shelf corner l 12inch w 12 inch with cp railing 15mm , bib cock pvc 15mm , single lever basin mixer 6 inch , hydraulic door closer isi marked , sink mixer cp 15mm , stop cock cp 15 mm internal thread , cp soap dish , gate valve brass 15 mm , seat cover plastic for ewc white colour , gi tubing med gde 20 mm is 1239 , pvc waste coupling 50 mm for stainless steel kitchen sink , telescopic channel 12 to 24 inch , waste pipe pvc 32 mm , shower rose cp 15 mm , paint enamelled og in 1 ltrs pack high glossy , paint enamelled grey in 1 ltrs pack high glossy , pvc seat for chair dining , door stoper alumunium double , float valve pvc 25 mm dia , cpvc reducer socket l 20mm w 15mm brass , red oxide primer 1 ltr in pack , curtain rod aluminium silver 20mm , bib cock pvc long body 15mm , fevicol sh 1 kgs pack , aluminium door handle 150mm , aluminium door handle 100mm , cp towel ring round pil4504b , curtain rod holder lattu 20mm silver , toilet paper holder with stainless steel flap 15mm , sliding door bolt alu 300mm rod dia 16 mm , cpvc pipe 15mm , cpvc mta brass 20mm , pvc angle cock 15 mm , paint enamelled black in 1 ltrs pack high glossy , pvc seat and back for chair verandah offrs , tower bolt alu 150 mm dia 12mm , nipple gi 15 mm 6inch long , cpvc socket brass 20mm , cpvc mta brass 15mm , pvc stop cock internal thread 15mm , cpvc pipe 20mm , cpvc fta brass 20mm , cpvc tank connector mt oblique ft 20mm , cpvc ball valve 15mm , helicol door spring 150mm , cpvc plain elbow 20mm , grating pvc 125 mm , pegs alluminium 100 mm , cpvc socket plain 20mm , pvc tank nipple 20mm , cpvc plain tee 20mm , pvc flush bend 40 mm , cpvc plain elbow 15mm , nylon sleeve 35mm pvc wall plug , cpvc socket plain 15mm , cpvc plain tee 15mm , cpvc pipe clip 20mm , cpvc union plain socket 20mm , cpvc fta plastic 20mm , cpvc end cap 20mm , grating cp 100 mm with hole , enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3)

CTN :41323584

19 Aug, 2025 NA

Ranchi - Jharkhand

Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficienc y level 3 of rating 500 kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer ta nk body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (ve ctor symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low volt age bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 20 0 kva) for variation of hv voltage from +5% to -10% in steps of 2.5%. following has to be submitted by su pplier along with supply of material: (i) type test report of transformer having same rating, make (& mode l if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:11 80 (part 1) latest. supply of outdoor type , plinth mounted, distribution transformer, minimum energy effici ency level 3 of rating 500kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non-sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star ( vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment n os. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) late st with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicato rs will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low volta ge side cable end box required. the high voltage bushings (3 nos.) shall conform to is/iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 kva) for variation of hv voltagefrom +5% to -10% in steps of 2.5%. following has to be submitted by s upplier along with supply of material: (i) type test report of transformer having same rating, make (& mod el if any) and design from nablaccredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates a s per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1 180 (part 1) latest. [ warranty period: 30 months after the date of delivery ]

CTN :41292233

19 Aug, 2025 4.90 Crore

Kanchipuram - Tamil Nadu

Tender For construction of high level bridge across ozhaiyur tank water spread at km 0/620 of ozhaiyur to ozhaiyur mottur road km 0/0-0/700 in ozhaiyur panchayat of wbd block of kpm dist-state special assistance phase-i-25-26 of pkg.no. tnkpm-03/ssa-bdg/2025-26

CTN :41192162

18 Aug, 2025 8.42 Lacs

Meerut - Uttar Pradesh

Tender For tender for cleaning of over head water tank by high pressure water jet,treatment of anti bacterial agent and uv radiation,testing of water,replacement of water level scale under management of cantonment board meerut cantt.

CTN :41213278

11 Aug, 2025 NA

Durg - Chhattisgarh

Tender For cleaning of high level over head tank & sumpwell with 42/24 mld and 11 mld filter plant sumpwell and clarrifer in durg nagar nigam area at in interval of 6 month for 2 times in a year.

Rcc Septic Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others