Latest rcc slab repair Tenders | Government rcc slab repair Tenders

State Government

CTN :40487853

02 Jun, 2025 15.97 Lacs

Navsari - Gujarat

Tender For repairing & renovation work at bagayat kacheri ,navsari dist. navsari (toilet repairing, gypsum sheet, plumbing work, drainage, colour, plinth protection work etc)

Central Government/Public Sector

CTN :40250101

02 Jun, 2025 1.41 Crore

Udhampur - Jammu And Kashmir

Tender For corrigendum : completion of incomplete work for provn of plinth adjoining mehar dispersal at af stn leh

Central Government/Public Sector

CTN :40502404

17 Jun, 2025 NA

Jorhat - Assam

Tender For repairs to flooring, plinth protection, plastering, sunken flooring and miscellaneous work in domestic area at afs under ge (af) jorhat

Central Government/Public Sector

CTN :40238443

02 Jun, 2025 30.00 Lacs

Jodhpur - Rajasthan

Tender For corrigendum : repairs to joinery internal water supply and cleaning of water tanks and plinth protection flooring tilling work in certain bldgs drala encalve arjan enclave latif enclave old pali road subroto smc sncos mess snco mess living in gurudwara vyas colony

CTN :40319578

02 Jun, 2025 18.23 Lacs

Budaun - Uttar Pradesh

Tender For corrigendum : for running contract for hon,ble sansad nidhi/vidhayak nidhi and other deposit works under edd-budaun (semi turnkey). - cartage of following material from store center nawada, budaun to je store/je store to site of work including loading & unloading at both ends maximum distance up to 30 km., a) pcc pole 8.5 mrt long/st pole 11 mtr long., b) 11 kv xlpe cable of 3x70/3x120/3x185/3x300 sq.mm., c) 250/400 kva t/f., d) 11 kv ct/pt unit of different size, e) 11 kv jointing kit of different size, f) 11 kv pilfer proof cubical of different size, g) lt abc cable of size 1x16, 3x50, 3x95, 3x120 sq.mm., cartage of line material (11 kv pin insulator, disc insulator, stay set, cross arm, gi wire, earthing rod, ms channel, ms angle, etc) from store centre to dump site & then dump site to site of work on day to day basis, including loading & unloading at both ends maximum distance up to 30 km., cartage of 10 kva & 25 kva transformer from store centre to site of work including loading & unloading at both site, the work of safe carriage 11 kv o/g vcb store center nawada budaun to work of site distance up to 0 to 30 km including safe loading & unloading., cartage of 63 kva to 100 kva transformer from store centre to site of work including loading & unloading at both site., earthing of each 11 kv line pole & t/f properly after drive of electrodes if size 20mmx250mm and connection the earthing point with gi wire., erection of pcc pole 8.5 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., erection of stp pole 11 mrt long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of soil including back filling of the pole with proper ramming after completion of work., fabrication and fixing of all 11 kv h.t/l.t. line accessories., erection of double pole on pcc pole 8.5 mtr/stp 11 mtr. long after digging of pit of required size including fabrication and fixing of top channel, droper channel & base channel alongwith, fixing all 11 kv accessories, fuse set 11 kv pin insulators and making connection properly., construction of new plinth for 250/400 kva as per uppcl norms, mounting of 250/400 kva t/f on plinth as per uppcl norms, providing and fixing wiremess fencing for 250/400 kva, erection/installation of following of vcb o/g in consumers site and cable joint of the panel to including earthing, grouting, anchor bolt of panel of making/repairing of pocket for cable to insert in panel form trench and fixing taping of busbar with wiring for ac,dc connection including providing ac and dc supply., chemical earthing for 250/400 kva t/f neutral and body complete, chemical earthing for vcb o/g, mounting of 10 & 25 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of 63 & 100 kva t/f with proper jumping of ht side and fixing of cable on lt. side of t/f making connection properly., mounting of ct/pt unit with proper jumping of ht side and fixing of cable on lt. side of meter cubical properly, fixing of meter cubical as per uppcl norms, making a section pole to exist pole after fabrication & fixing of t channel fixing of all 11 kv accessories., erection of stay rod complete after digging a pit of size 1.20 x 0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming., laying lifting stringing of proper sagging of acsr weasel/rabbit/dog conductor for 3 phase, 3 wire 11 kv line including binding & jumpering properly., laying lifting stringing of proper sagging of 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm., laying of underground 11 kv xlpe cable of 3x70, 3x120, 3x185, 3x300 sq.mm. sizes with open trench by brick & sand as per uppcl norms., filling the 11 kv jointing kit (joint kit providing by c

CTN :40437431

28 May, 2025 10.77 Lacs

Panipat - Haryana

Tender For completion of dhantan pana choupal at village alupur block madlauda , work above plinth beam completion of kashyap choupal at village alupur, boundary wall, toilet and gate

CTN :40412114

26 May, 2025 NA

Mathura - Uttar Pradesh

Tender For deposit work in the area of edsd-laxminagar under edd-laxminagar, mathura - carriage of 8.5 mtr long pcc pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 9/11 mtr long st pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 16 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 25 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 63/100 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 250 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 11 kv xlpe cable size 3x70/3x120 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of 11 kv xlpe cable size 3x185/3x300 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of line material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required material from store center at 132 kv substation mathura to the site of work including loading and unloading of material at both ends., erection of single pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of single pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., installation of stay set with grouting and nuzzling etc. as per respo drawing along with all routine material to be used for such works., earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work., laying, sagging stringing and binding of acsr weasel conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of acsr dog conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of arial bunch conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of lt pvc cable on the erected pcc pole/stp including jumpering as per respo manual., laying of 11 kv xlpe cable size 3x70/3x120 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., laying of 11 kv xlpe cable size 3x185/3x300 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., filing of cable box as suitable size as per direction of supervising engineer., filing of straight through as suitable size as per direction of supervising engineer., chopping of tree branches to clear the route properly., mounting of 16 kva transformer on the double pole/plinth struct

CTN :40412121

27 May, 2025 NA

Mathura - Uttar Pradesh

Tender For deposit work in the area of edsd laxminagar under edd-laxminagar, mathura - carriage of 8.5 mtr long pcc pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 9/11 mtr long st pole from 132 kv store center mathura to site of work through the kacha and pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, t&p, carrier etc. required for proper completion of work.(distance 00-70 kms.), carriage of 16 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 25 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 63/100 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 250 kva transformer from store centre, mathura to pit site with loading & unloading at both ends, carriage of 11 kv xlpe cable size 3x70/3x120 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of 11 kv xlpe cable size 3x185/3x300 sq.mm. cable form store center mathura/agra including cost of shifting of drum from inside of store, removing of cable from drum and re-rolling of extra removed cable including loading & unloading at both ends., carriage of line material i.e. conductor, g.i. wire tpmo stay rod, disc insulator, cross arm, angle channel and other required material from store center at 132 kv substation mathura to the site of work including loading and unloading of material at both ends., erection of single pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of single pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 8.5 mtrs on pcc pole by digging of pits fitting of all relevant accessories as per respo norms., erection of double pole structure 9/11 mtrs on st pole by digging of pits fitting of all relevant accessories as per respo norms., installation of stay set with grouting and nuzzling etc. as per respo drawing along with all routine material to be used for such works., earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour t&p and required material for such work., laying, sagging stringing and binding of acsr weasel conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of acsr dog conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of arial bunch conductor on the erected pcc pole/stp including jumpering as per respo manual., laying, sagging stringing and binding of lt pvc cable on the erected pcc pole/stp including jumpering as per respo manual., laying of 11 kv xlpe cable size 3x70/3x120 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., laying of 11 kv xlpe cable size 3x185/3x300 sq.mm. in the trench/g.i pipe/hdpe pipe and re-dressing of trench after laying of xlpe cable for proper completion of work as per direction of supervising engineer., filing of cable box as suitable size as per direction of supervising engineer., filing of straight through as suitable size as per direction of supervising engineer., chopping of tree branches to clear the route properly., mounting of 16 kva transformer on the double pole/plinth struct

CTN :40400096

29 May, 2025 92.8 Thousand

Rambha - Odisha

Tender For plinth protection work, colour washing and installation chujja of the restshed at minchinipatna

CTN :40420910

27 May, 2025 34.60 Lacs

Kanpur - Uttar Pradesh

Tender For 3. s/i of 06 nos open gym in distt kanpur dehat - elliptical machine dimension 1200x900x450mm, combined climber/chinup bar two peopler dimension 22, rowing machine dimension 1280x800x1150mm, arm shoulder wheel dimension 600x300x1500mm, steppertwister dimension 1200x750x360mm, parallel bar dimension 2000x600x1200mm, dual ab board dimension 1500x1500x1200mm, two people sitting pushing and pulling exerciserdimensions 1800x900x1500mm, frieght of equipment - 5%, installation of gym equipment, supply and fixing of sign board, photography charge, earth filling, earth work excavation in trench for foundation ,pipes ,cable etc in ordinary soil(loan clay or sand) including upto1.5 m lead upto 50 m dressing of side and ramming of bottom and disposal of surplus excavated earth as directed by the engineer -in -charge with a lead 50m .ref to dsr/pwd spec.2.6(2.6.1), providing and laying in cement concrete 1:6:12(1cement:6 coarse sand:12 graded brick ballast 40 mm nominal size) and form work,curing complete as per technical specificatation .ref to dsr/pwd sch273, m-150 class brick work in foundationand plinth in1:4 cement and coarse sand mortar with all complete upto the plinth including supply of all matrials , labour ,t &p etc required for proper completion of work..ref to dsr/pwdspec-6.1.1, 12 mm thick plaster singel coat on fair side of 1:4 one cement and four coarse sand complketeitem.ref to dsr/pwd spec-13.4.1, providing and laying of 60 mm thick interlocking tiles completeitem,mord-1500(6.7)(2)

Rcc Slab Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector