Latest rcc speed breaker Tenders | Government rcc speed breaker Tenders

corporations/Associations/Others

CTN :41811125

19 Sep, 2025 1.06 Crore

Chennai - Tamil Nadu

Tender For sse electrical works and providing foundation for structural plinth, cable duct, culvert, formation of new rcc road and other allied civil works for introduction of 33kv ratio with 1x16 mva p.tr. at thorapadi 110kv ss.

Central Government / Public Sector

CTN :41823023

25 Sep, 2025 87.23 Crore

Delhi - Delhi

Tender For execution of civil work consisting of piling, foundation , rcc framed structures, road works, land scaping works under the project of construction of dedicated rural industrial park in thiruvananthapuram dist. kerala pkg i

Central Government/Public Sector

CTN :41804605

22 Sep, 2025 26.11 Lacs

Baikunthpur - Chhattisgarh

Tender For strengthening of rcc column of gantry, 1and2 bunker and discharge base foundation of katkona sub area of baikunthpur area

Central Government And Public Sector

CTN :41343546

13 Sep, 2025 28.63 Lacs

Jaipur - Rajasthan

Tender For bid to ras bid to ras supply of call basis maintenance of diesel engine alternator sets under ed jaipur d d - more than 20 kva and upto 55 kva dea sets , unloading up to 20 kva dea sets , unloading more than 20 kva and upto 55 kva dea , itc of up to 20 kva dea sets on existing foundation , itc of more than 20 kva and upto 55 kva dea , labour charges for top overhauling of existing dea sets up to 20 kva , replacement of the liner assembly with rubber ring dea sets up to 20 kva , replacement of the piston set without piston ring set dea sets up to 20 kva , replacement of the piston ring set dea sets up to 20 kva , replacement of the set of gasket including head gasket dea sets up to 20 kva , replacement of the o ring set dea sets up to 20 kva , replacement of the cr bearing dea sets up to 20 kva , replacement of the main bearing dea sets up to 20 kva , replacement of the oil pressure guage dea sets up to 20 kva , replacement of the front oil seal of crank shaft dea sets up to 20 kva , replacement of the back oil seal of crank shaft dea sets up to 20 kva , labour charges for top overhauling of more than 20 kva and upto 55 kva , replacement of the liner assembly with rubber ring dea sets more than 20 kva and upto 55 kva , replacement of the piston set without piston ring set dea sets more than 20 kva and upto 55 kva , replacement of the piston ring set dea sets more than 20 kva and upto 55 kva , replacement of the set of gasket and head gasket dea sets more than 20 kva and upto 55 kva , replacement of the o ring set dea sets more than 20 kva and upto 55 kva , replacement of the cr bearing dea sets more than 20 kva and upto 55 kva , replacement of the main bearing dea setsmore than 20 kva and upto 55 kva , replacement of the oil pressure guage dea sets more than 20 kva and upto 55 kva , replacement of the front oil seal of crank shaft dea sets more than 20 kva and upto 55 kva , replacement of the back oil seal of crank shaft dea sets more than 20 kva and upto 55 kva , repairing of cylinder head , repairing of up to 20 kva dea sets crank shaft , repairing of more than 20 kva and upto 55 kva dea sets crank shaft , transportation charges up to 50 km for alternator up to 55 kva , transportation charges more than 51 to 100 km for alternator up to 55 kva , rewinding of main stator winding of alternator up to 20 kva , rewinding of main rotor winding of alternator up to 20 kva , rewinding of main stator winding of alternator more than 20 kva and upto 55 kva , rewinding of main rotor winding of alternator more than 20 kva and upto 55 kva , exciter stator winding of alternator up to 55 kva , exciter rotor winding of alternator up to 55 kva , replacement or repairing of avr , replacement or repairing of power diode for rotating rectifier assembly , replacement or repairing of bearing suitable for above 20 kva alternator , providing of 2 core 16 sqmm , providing of 4 core 16 sqmm , laying of one number upto 35 sq. mm on wall surface , laying of one number upto 35 sq. mm direct in ground , laying of one number upto 35 sq. mmin the existing rcc or hume or metal pipe , supply and making end termination for 2 x 10 sq. mm 19 mm , supply and making end termination for 4 x 16 sq. mm 28 mm , providing and fixing 6 swg dia g.i. wire , sitc of 32 amps four pole on load side handle operated change over switch , sitc of 63 amps 2 pole on load side handle operated change over switch , sitc of 63 amps four pole on load side handle operated change over switch , providing and fixing 63 amp tpn disconnector fuse switch unit

Central Government And Public Sector

CTN :41810863

19 Sep, 2025 14.67 Lacs

Chikhali - Maharashtra

Tender For redeployment of 40 meter nblw ground based tower infrastructure including rcc foundation, dismantling of old marr tower at chikhali , 40 meter nblw tower at bachani, shifting to site at new location, erection-painting, earthing with bts platform and barbed wire fencing at village nanibai chikhali (kagal sdca) in kolhapur ba under phase ix.2 project.

State Government

CTN :41808004

22 Sep, 2025 1.60 Crore

Alappuzha - Kerala

Tender For this work consists of strip footing and interconnected strip beam as foundation. this is a rcc framed structure with roof beams, columns, slab and stair room covered by gi sheet on first floor,electrification and plumbing etc

CTN :41817964

22 Sep, 2025 NA

Multi City - Multi State

Tender For supply of fabrication and erection of ms column of size 100mm x 100mm x 4mm with proper rcc foundation of size 450 x 450 x 600mm and two coat of red oxide and two coat of enamel paint , supply and fixing of 500 watt led light with proper wiring main connection electric supply are in client scope , boxing mat , head gears guards , gloves , bells , timers , whistle , referres table and chairs , rope strands

CTN :41778406

15 Sep, 2025 NA

Visnagar - Gujarat

Tender For demolition work of auditorium buildingplinth foundation, r.c.c. footing, and columns using diamond cutter machine, hand breaker, or jcb breaker machine as required the contractor shall provide all necessary labor, tools, equipment, and machinery for safe and proper execution of the work as per site requirements and instructions of the engineer-in-charge

CTN :41777020

22 Sep, 2025 NA

Jalaun - Uttar Pradesh

Tender For providing, installation, testing & commissioning of high mast tower pole by providing high mast of 16m height and 12 nos. led lights (250watt) of approved make with rising system, hot dip galvanized inside & outside, having pole sheet thickness 4mm, top dia minimum 150mm, bottom dia minimum 360mm, base plate 25mm thick, suitable for wind velocity as per is 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes, 1.0 hp power tool motor, 3 point suspension system with steel wire rope 6 mm dia, double drum winch manual handle, foundation bolts 08 nos. nuts, washers, anchor plates, rcc foundation etc. complete in all respect and all material, labour & t&p required for proper completion of work at new mahoi pump canal, districtjalaun.

Central Government And Public Sector

CTN :41043865

13 Sep, 2025 NA

Kolasib - Mizoram

Tender For bid to ras supply erection commissioning and testing of 20m high mast at thps including civil works d d - design manufacture supplying testing and commissioning of 20m high mast system with its accessories , supply of 300w led flood light made up of pressure die cast aluminum housing with toughened glass and high powered leds , supplying and erection of control panel or feeder pillar , supply and erection of twin 100w led dom aviation obstruction lights , design and construction of rcc civil foundation for the high mast , erection of the high mast with the help of suitable equipment and wiring of luminaries with materials and labour , gi pipe earthing for high mast with 3 m long 50 mm dia and 4mm thickness gi pipe including accessorie , providing service connection with 4 core aluminium 25 sq.mm 1.1kv armoured ug cable including supply layingtrenching and termination , providing 4c x 2.5 sq. mm copper conductor armoured cable 1.1kv for motor including supply laying trenching and termination as per specification , providing one 1 set of t and p for the operation maintenance practices of the masts and the raising and lowering arrangement , delivery up to site including packing and forwarding charges freight and insurance ) /bid number : gem/2025/b/6441974 * /dated: 11-07-2025 & & / bid document 1 / 19

Rcc Speed Breaker Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government / Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

State Government

Central Government And Public Sector