Latest rcc stone Tenders | Government rcc stone Tenders

Central Government/Public Sector

CTN :45334600

29 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For jhansi-sithauli - rebuilding / replacement of various stone slab bridges by rcc box / slab under jurisdiction of aden/line (41 no.)

CTN :45303092

08 Jun, 2026 NA

Delhi - Delhi

Tender For supply of instant curing bituminous ready cold mix , coarse sand zone iii , stone aggregate 20mm 10mm , granular sub base , brick , precast rcc gt slab 550x600mm , paver block , road gully grating , kerb stone of m-25 grade , cement opc 43 grade , flexible median marker , bollard size 950 mm height and 150 mm round m 25 grade , delineator , retro reflective tape

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45307562

06 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of sand as per scope of works , stone aggregate as per scope of works , stone aggregate 40 mm graded as per scope of works , stone aggregate oblique hard core 63 to 100 mm , rr stone as per scope of works , brick bats oblique stone agg 40 to 63mm , quick setting compound , lime , white cement , bitumen 85 oblique 25 , bitumen filler board , ms binding wire 2mm dia , 3mm tk pvc strip as in floor , water proofing compound , pcc block as per scope of works , pcc block 400 x 200 x 200 mm , pcc block 400 x 300 x 200 mm , black granite slab 20 to 25 mm , 25 mm thick black granite of size 2 point 0 x 0 point 5 mtr

CTN :45224361

03 Jun, 2026 NA

Patti - Punjab

Tender For corrigendum : supply of 3d printed continuous glass fiber reinforced concrete panels as per the ts , steel lintels for 2 openings above loopholes and 3 above door , box sections of size 100x100x5mm cut to length , 10mm and 12mm tmt bars , pcc solid block or class a bricks , stone patti slab each of size 600x300x50mm thick , paver block m 20 grade and 50mm thickness , flexible polyurethane foams sealant 750ml , eaterior weather proof paint , ms loop hole of size 900x400mm drawing duly painted with two coats , ms door of size 900x1850mm drawing duly painted , sand bag 18inchx34inch hdpe , pbs roll 20m x 1m , bitumen primer , well graded sand , all in one aggregate , 0 point 5mm thick cgi or metal deck or ppgi sheets for roof casting of size 20ft x 4ft , 12 mm and 20 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , opc oblique ppc 53 grade cement , distemper oil emulsion , three tier bunk bed , toilet accessories including ews and shower and hand wash and septic tank

Central Government/Public Sector

CTN :45273382

09 Jun, 2026 98.7 Thousand

Thiruvananthapuram - Kerala

Tender For providing and laying of kota stone slab flooring in the kitchen of sos mess at shq bsf trivandrum

CTN :45190150

22 May, 2026 5.06 Lacs

Aroor - Kerala

Tender For corrigendum : aroor gramapanchayath 2025-26 pro no498/26 mannattu stream stone work and slab laying across the stream

CTN :44816560

02 Jun, 2026 11.65 Lacs

Multi City - Haryana

Tender For corrigendum : construction of toilet,1.0 no. staff room along with slab existing two no. staff rooms by dismantling stone slab roof and other allied works - dnit for the work :-construction of toilet,1.0 no. staff room along with slab existing two no. staff rooms by dismantling stone slab roof and other allied works at complaint centre tikona park, gurugram

CTN :45233110

21 May, 2026 2.00 Lacs

Bikaner - Rajasthan

Tender For repair work in gsss kudasu- building work- brick masonry with f.p.s. bricks of class designation 75 in foundation and plinth with bricks cement mortar 1:6 (1 cement: 6 coarse sand), providing and laying in position cement concrete including curing, compactic etc. complete in specified grade excluding the cost of centering and shutterin -all work up to plinth level. m10 grade nominal mix 1:3:6 (1 cement: 3, coarse sand: 6 graded stone aggregate 20mm nominal size)., repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joint and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead with cement, mortar 1:4 (1 cement: 4 coarse sand), providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming, coat.of.rad.oxide ms rectangular pipe 25x50x3mm 3.22kopec mir, kota stone siab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand) for area c each slab from 901 to 2000 sq.cm:, painting with synthetic enamel paint of approved brand and manufacture to give an even shade: two or more coats on new work

CTN :45225390

03 Jun, 2026 NA

Patti - Punjab

Tender For supply of 3d printed continuous glass fiber reinforced concrete panels as per the ts , steel lintels for 2 openings above loopholes and 3 above door , box sections of size 100x100x5mm cut to length , 10mm and 12mm tmt bars , pcc solid block or class a bricks , stone patti slab each of size 600x300x50mm thick , paver block m 20 grade and 50mm thickness , flexible polyurethane foams sealant 750ml , eaterior weather proof paint , ms loop hole of size 900x400mm drawing duly painted with two coats , ms door of size 900x1850mm drawing duly painted , sand bag 18inchx34inch hdpe , pbs roll 20m x 1m , bitumen primer , well graded sand , all in one aggregate , 0 point 5mm thick cgi or metal deck or ppgi sheets for roof casting of size 20ft x 4ft , 12 mm and 20 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , opc oblique ppc 53 grade cement , distemper oil emulsion , three tier bunk bed , toilet accessories including ews and shower and hand wash and septic tank

Rcc Stone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector