Latest rcc stud Tenders | Government rcc stud Tenders

Central Government/Public Sector

CTN :40214288

21 May, 2025 NA

Thanjavur - Tamil Nadu

Tender For provn of pol store at afs thanjavur - surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed. excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth; for foundation etc or for shafts, wells, cesspits, manhole, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. description all as per srl item no 3 here-in-before but depth exc 1.50m but not exc 3.0m complete all as specified and as directed. m&l pcc 1:4:8 type d-2 (using 40mm graded stone agg) as in foundation, filling and mass concrete complete all as specified and as directed. m& l brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and as directed. m&l mild steel tmt bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. description all as per srl item no 7 here-in-before but for 6mm to 8mm dia complete all as specified and as directed. description all as per srl item no 7 here-in-before but for 5mm dia and over and including 10mm dia in stirrups spacers and binders complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for coloumns, etc basement slabs under reamed piles and mass concrete complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed. m&l rcc m-25 (using 20 mm size graded stone aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. m&l rcc m-25 (20 mm graded stone aggregate) as in chajjas complete all as specified and as directed. m&l rcc m-25 (20 mm graded stone aggregate) as in beams, cantilvers, bressummers, lintels over 1.5m span complete all as specified and as directed. use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished complete all as specified and as directed. use and waste of formwork to sides of pillars posts, struts, piers, columns and stanchions finished the suface rough complete all as specified and as directed., use and waste of formwork to sides and soffits of floors or roof beams, beams haunchings, girders,bressummers lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc rough finished complete all as specified and as directed. use and waste of formwork to chajjas, troughts and similar items including edges rough finished complete all as specified and as directed. m&l form work with fair finished surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work nexc 200mm thick (horizontal or sloping) complete all as specified and as directed. supply only water proofing compound complete all as specified and as directed. s&f framed work as in door or gates of angle or other section with gusset plate, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing confirming to fe-410-w (gde e-250) quality "a" complete all as specified and as directed. s&f framed wor

CTN :40210321

16 May, 2025 NA

Dhar - Madhya Pradesh

Tender For supplying construction material for repair and maintanance work at badnawar - 6mm machine broken aggregate including supply at site, 10mm machine broken aggregate including supply at site, 12mm machine broken aggregate including supply at site, 20mm machine broken aggregate including supply at site, gsb includding supplying and rollong at site complete, river sand including supply at site, balu sand including supply at site, moorrum with filling jcb including supply at site, cement isi mark 43 grade or 53 grade including supply at site, stone dust including supply at site, brick open bhatta supplying at site, black soil, iron jaali angle tube chamber plate aal type including filling, hot rolled hyysd bars isi marked 6mm, hot rolled hyysd bars isi marked 8mm, hot rolled hyysd bars isi marked 10mm, hot rolled hyysd bars isi marked 12mm, hot rolled hyysd bars isi marked 16mm, roller including fuel operater, painting steel work including material etc work, painting rcc brick work including material etc work, tiels vetrified, red farsi 40mm thk, kota stone 20mm thk, granite stone 20mm thk, jcb including fuel and operator, tractor including fuel and operator, concrete fiory including fuel and operator, mixer machine ncluding fuel and operator, poclane including fuel and operator, oil bound distemper of approved brand isi mark, cement concrete work m-20 including labour all complete, centering supply fitting workcomplete including laboure, chamber drainage cover, plaster including labour work 6mm, 12mm, 15mm, paver block 80mm thk fitting complete, rcc pipe np3 200mm dia, rcc pipe np3 300mm dia, rcc pipe np3 400mm dia, rcc pipe np3 600mm dia, rcc pipe np3 1200mm dia, writing work on stone all types, oil paint, pvc pipe 6kg 150mm dia, pvc pipe 6kg 100mm dia, pvc pipe 6kg 200mm dia, gi sheet including fitting work, pot hole repair of existing bituminous /concrete roads with hot mix bituminous material all compltete, ss railing work including fitting all complete, concrete breaker machine, acp pannel installation supplying erection all complete, urinal fitting all complete, indian pattern toilet seat fiiting all complete

State Government

CTN :40180239

16 May, 2025 1.46 Crore

Mahisagar - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka khanpur under taluka panchayat, khanpur under mgnrega (annual unit rate) - 53 grade isi opc cement, 2, 490.64, cu.m., 1, screened gravel 12 mm size, 6, 187.34, cu.m., 1, rubble, 10, 95.15, kg, 1, white cement, 14, 57.63, cu.m., 1, hand broken stone aggregate 40 mm size to 63 mm size, 18, 39.83, 100 each, 1, g. i. plain washer, 22, 151.69, litre, 1, marble slab polished granite stone 20 to 25mm thick black, 26, 402.54, each, 1, r.c.c. heavy duty non-pressure pipe i.s.class np2-600 mm dia., 30, 3.18, rmt, 1, upvc sch 40 for cold water 40mm dia (1.1/2"), 34, 273.73, rmt, 1, structual steel m.s. channel,joints, tee, gusset plate etc., 38, 296.61, each, 1, white vitriousching wash down w.c. (european), 42, 39.62, sq.m., 1, pillar tap 15 mm dia., 46, 198.31, sq.m., 1, g. i. sheet 0.8 mm thick corrugated class-3, 50, 226.27

State Government

CTN :40138522

02 May, 2025 11.32 Lacs

Pernem - Goa

Tender For providing and installing various electrical accessories to various government primary schools in pernem taluka - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm fr pvc insulated copper conductor single core cable in pvc casing caping with modular switch modular plates suitable size modular surface box of specified category and earthing the point with 1.5 sq.mm fr pvc insulated copper conductor single core cable etc. as required.;(c) group c -- with cat a modular accessories, wiring for 5a /15a plug with 2 x 4 sq.mm fr pvc insulated copper conductor single core cable in pvc casing capping alongwith 1 no 4 sq.mm fr pvc insulated copper conductor single core cable for loop earthing as required., supplying and fixing suitable size modular pvc box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 a modular socket outlet and 5/ 6 a modular switch connection painting etc. as required., supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required;(a) cat a, installationearthing testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm frfrls pvc insulated copper conductor single core cable etc. as required., supply and erecting of 48 inch (1200mm sweep) ceiling fan double ball bearing type complete with all accessories.;(a) cat a, supply and erecting s type stainless steel fan hook fabricated out of 10 mm round bar complete as required., supplying and fixing extra down rod of 20 cm length gi pipe 15 cm dia heavy gauge including painting etc as required, supplying and fixing 6 a to 32 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(a) sp cat a, earthing with gi earth pipe 2 mts long 40 mm dia medium class with isi markof approved brands including accessories and providing masonry enclosure with ci/rcc cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the earthing drawing provided by the engineer-incharge.the scope of work includes the following: a) excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) class b gi pipe 40mm diameter as per specifications. c) charcoal/salt as per specs ( paid seperately). d) refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)masonary chamber with proper foundation cover plate and locking arrangement. f) testing of earth value with earth megger and certifications of its value. aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).;(a) in soily strata, extra for using salt and charcoal for pipe earth electrode as required( 65 kgs of charcoal and 5 kgs of salt)., providing and fixing 4 mm dia copper wire on surface or in recess for loop arthing along with existing surface/ recessed conduit/ submain wiring/ cable as required, supply of 3 core unarmoured pvc/xlpe insulated pvc sheathed copper conductor cable of 1.1 kv grade with isi mark conforming to is:1554(part i) is:7098(part i) with latest amendments of following size.;3 core 2.5 sq.mm, supply and fixing of led batten 4 feet 20 watt with led tube as required of make panasonic or equivalent in crompton bajaj havells as approved by engineer incharge. the led tube should have a warranty of two years from the date of commissioning.

CTN :40134775

16 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For custom bid for services - 2 years so for isbl piping jobs-1) pre-fab : fillet j, pre-fab : butt joint (cs), pre-fab : rf pad cs weld joints, pre-fab: corrosion pad cs weld joints, pre-fab: corrosion pad (cs) with shoe, pre-fab: fillet joint (alloy steel) tig, pre-fab: fillet joint (ss) tig, pre-fab: fillet joint (dss/sdss) tig, pre-fab: fillet joint (inconel/monel) ti, pre-fab: butt joint (alloy steel), pre-fab: butt joint (ss), pre-fab: butt joint (dss/sdss), pre-fab: butt joint (inconel/monel), field: fillet joint (cs) tig, field: butt joint (cs), field: rf pad cs weld joints, field: corrosion pad cs weld joints, field: corrosion pad (cs) with shoe supp, field: butt joint (ss), field: butt joint (alloy steel), field: butt joint (dss/sdss), field: butt joint (inconel/monel), pre-fab : rf pad as weld joints, pre-fab : rf pad ss weld joints, pre-fab: corrosion pad ss weld joints, pre-fab: corrosion pad as weld joints, pre-fab: corrosion pad (ss) with shoe, pre-fab: corrosion pad (as) with shoe, field: corrosion pad ss weld joints, field: corrosion pad as weld joints, field: rf pad ss weld joints, field: rf pad as weld joints, field: corrosion pad (ss) with shoe supp, field: corrosion pad (as) with shoe supp, overlay patch - cs-upto 6mm thick, overlay patch - as/ss-upto 6mm thick, overlay patch - inconel/monel-upto 6mm t, inlay patch - cs - upto 6mm thick, inlay patch - as/ss - upto 6mm thick, inlay patch - inconel/monel - upto 6mm t, weld run - cs (tig), weld run - cs (arc), weld run - with ss/as electrodes, weld run - with ss/as filler, weld run - with dss/sdss filler, weld run - with dss/sdss electrodes, weld run - with monel/inconel filler, weld run - with inconel/monel electrodes, non-pressurized piping welding joint, bending of plate for patch welding jobs , hot bending of pipe/tube below 1.5" dia, cold bending of pipes/tube below 1.5" di, rolling of plate into pipe, replacement of structural beams/columns , replacement of structurals-angles flats , replacement of grating/chequer plate (by, replacment of gratings (with welding), pipe clamp fabrication, blind fabrication, plate flange fabrication, welding of pin holes/spot welding (excep, fabrication of sample cooler coil n repl, dp test(piping), dp test(other than piping), dp test - surface area/tube sheet, mobilization of closed proximity radiogr, radiography upto 1.5" dia. - rate applic, radiography - above 1.5" dia. and upto 3, radiography - above 3" dia. and upto 6" , radiography (above 6"), radiography(other than piping), stress relieving upto 1.5" dia. - applic, stress relieving above 1.5" and upto 3" , sr - (above 3"), sr (other than piping), mobilisation of wfmpt/ufdt equipment wit, wfmpt, ufdt, mobilization charges for digital radiogr, hardness test, replacement of hexmesh (shell connected , replacement of hex mesh (inside cyclones, manual cleaning of piping/eqpt, copper slag / grit blasting, painting of zinc silicate, painting of zinc phosphate, hiring of mobile crane, supply and operation of tractor trailer, supply and operation of jeep/pick-up tru, hiring of air compressor - weekly, running hour rate for air compressor, supply and operation of diesel de-wateri, blind removal/installation, threaded fittings, valve - dropping/ installation, insulation removal, hydro test of pipelines, system scaffolding - rate per block 2.5m, manway opening/box-up, cold cutting of pipelines, bolts cutting with hacksaw/grinding/gas , chipping - rcc/ refractory, chipping - pcc, pcc - 1:4:8 ratio, pcc - 1:1.5:3 ratio, rcc of 1:1.5:3 ratio, excavation and back filling, provision of concrete box to arrest leak, replacement of ss anchors, replacement of cs anchors, replacement of inconel anchors, unplugging as per operation, tech data entry services, addtnl hrs : tech data entry srvcs, cs welding crew at workshop/fabrication , cs welding crew at unit/site, cutting crew (gas cutter/grinder), rigging crew, ss/monel/inconel welding crew at unit/si, ss/as/monel/inconel welding crew at shop

CTN :40100146

02 May, 2025 13.07 Lacs

Multi City - Karnataka

Tender For material supply for construction of solid waste disposal unit of ramadurga village - rivabroken stone aggregate 40 mm size, rivabroken stone aggregate 20 mm size, rivabroken stone aggregate 12 mm to 10 mm size, rivacoarse sand zone iii, rivaportland cement, rivamier concrete 1 cum capacity, rivaadd watering charges at 1 on rial, rivaplasticizer super plasticizer, rivahom of vibrator 0 71 days, rivasilver oak or equivalent planks 38 mm thick, rivacasurina poles 100 150 mm, rivaadd handling loading and unloading at 2 on rial, rivagranitetrap broken metal 100 mm and down size, rivasize stone 20 20 25 cms, rivabond stone 20 20 45 cm, rivaboulders, rivamier concrete small used in culvert, rivamason class i with tools, rivamason class ii with tools, rivastone chistler class ii, rivajungle wood runners and planks, rivatmt bars fe 500, rivabinding wire, rivaburnt bricks class 35 non modular, rivamathinandi wood planks for panels 25 mm thick, rivaadd cutting and other wastage 5, rivamathinandi wood scantling, rivaunit cost as per the specification, rivaadd providing and removing scaffolding at 3 on labour, rivaweld mesh 75 25 mm of 6g to 10g, rivams angle iron 50mm 50mm 6mm 33.8 mtr in length at 4 5 kg per mtr, rivams angle iron 40mm 40mm 6mm 23 mtr in length at 3 5 kg per mtr, rivagusset plates 6 mm thick, rivabase plate base plate, rivaanchor bolts 750mm, rivacorbon electrodes, rivawelder grade i, rivahom of welding and grinding machine, rivaadd, rivahom of cutting and grinding machine, rivaready mi primer paint ready mi red lead paint, rivapainter class i, rivaenamel metal paint, rivatools & plants and electrical charges 2, rivarcc cap 1000 mm dia 100 mm thick, rivacost of 6 5mm ms coil, rivafabrication charges, rivatransportation charges of rials beyond 5 km 10, rivalabour charges for handing errection of rcc rings etc 5, rivapvc pipe of 4kgcum110 mm, rivagravel 2.36 mmmurrum, rivatractor 40 hp, rivaindian type water closet of size 580 mm of specified make with footrests, riva100mm s or p trap, rivachlorinated polyvinyl chloride cpvc pipe 25 mm outer dia, riva50 mm dia ms hollow pipe b class 14 gauge, riva16 16 mm ms square rod, riva36 mm 6mm ms plates, riva40 6 mm ms plates, rivacast iron spike, rivaball bearing hinges heavy duty, rivaanticorrosive bituminous paint black, rivamechanic class iimechanic hmp grade ieme grade, rivahom of cutting and grinding machine 1, rivapolyenthylene water storage tank of specified capacity l

CTN :39774606

26 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For bid to ras corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold, ambuja,ultratech,acc,jk,dalmiya under job no 2633 ug comd bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 maketata,sail,jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric as per store list attached , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 8mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 10mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 12mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie maketata,sail,jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr fixit, fevicol , quick setting compound makepidilite,fevicol,quick fix , cement based paint snowcem make-berger,asian,nerolac , oil bound distemper washable quality of proprietary brand of makenerolac,berger,asian , birla white wall care putty water resistant white cement make-nerolac,berger,asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer and as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix,jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5- 2004 make-berger,asian,nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal,hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame of size 1000mm x 1000mm including all as per store list attached , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed as per store list attached , ms anchor bolt, suitable for rcc work, 12mm dia, 300mm long with 2 washer and a nut minimum wt of each bolt and nut

State Government

CTN :40105211

01 May, 2025 11.43 Lacs

Kasauli - Himachal Pradesh

Tender For construction of r/wall path bridge at gamber rampur to katal kayar link road (sh demolishing rcc work provide & fixing of chequered plate etc.)dc deposit

State Government

CTN :40075313

28 Apr, 2025 NA

Chandrapur - Maharashtra

Tender For material supply parsodi panchayat samiti gondpipari - "80mm ballast (boulder)", "40mm ballast black", "20mm ballast black", "10mm ballast black", "sand (fine)", "sand (coarse)", mortar, filler, bricks (cement), bricks (clay), cement, 06 mm iron, iron 8 mm, iron 10 mm, iron 12 mm, iron 16 mm, plastic 125 mm, centering wire, bitumen pad, iron plate 4*5 feet, plastering, tanker rental, roller rental, mixer machine rental, jcb rental, oilbonddistemper asian, oilpaint asian, plasticpaint asian, waterproofcementpaint asian, dr.fixit waterproofsolution, wall putty 20 kg, toilet sheet vent pipe, steel basin 16*16, washbasin standard size, nails, g.p.i sheet, profile g.i sheet, steel grill material, m.s. square pipe, ankal nut bolt, iron angle, iron grill material, iron doors 1.00*2.10 m 18 gauge m.s. sheet door, iron door frame 1.00*2.10 m 3 inch bottom, solid core flush door 1.00*2.10 m, cement frame door 3*7 ft, cement frame door 2.5*7 ft, cement frame window 4*4 ft, cement frame window 4*6 ft, cement frame window 3*4 ft, cement frame window 5*4 ft, r.c.c pipe 300 mm with collar joint , rcc pipe 600 mm with collar joint , rcc pipe 800 mm with collar joint , rcc pipe 900 mm with collar joint , rcc pipe 1000 mm , rcc pipe 1200 mm with collar joint , paver block size large , paver block size small , pauliscottastone , white glazed tiles , checker tiles 25*25*25 mm , ceramic tiles , vetified tiles , granite , breaker machine rental , side to side material shifting , vibrator rental , centering rental

State Government

CTN :40059761

07 May, 2025 1.30 Crore

Mahisagar - Gujarat

Tender For supplying and stacking various type of building, road & other construction materials, at various places of taluka kadana under taluka panchayat, kadana under mgnrega (annual unit rate)-, 53 grade isi opc cement, , crushed stone aggregate for hard quality 10 mm to 20 mm size, , crushed stone aggregate for hard quality 40 mm to 63 mm size, , screened gravel 10 mm size, , screened gravel 12 mm size, , unscreened gravel, , coarse sand, , fine sand, , rubble, , murrum/ binding material, , t.m.t. bars fe-415, , stone dust, , white cement, , distemper primer, , bricks aggregate 40 mm size, , hysd bar, , hand broken stone aggregate 40 mm size to 63 mm size, , binding wires, , bitumen washer, , g.i. j or l hooks., , g. i. plain washer, , enamel paint, , enamel primer, , door shutters decorative type 35 mm thick both sides teak finished., , marble slab polished granite stone 20 to 25mm thick blacs, , flat back wash basin white vitrious china 450mm x 300 mm size, , urinal stall type half size, , r.c.c. heavy duty non-pressure pipe l.s.class np2-900 mm dia., , r.c.c. heavy duty non-pressure pipe 1.s.class np2-600 mm dia., , pvc water tank, , upvc sch 40 for cold water 15 mm dia. (1/2"), , upvc sch 40 for cold water 25 mm dia. (1"), , upvc sch 40 for cold water 40mm dia (1.1/2"), , p.v.c. pipes 10 kgf/sq.cm 110 mm dia., , p.v.c. pipes 10kgf/sq.cm 50 mm dia, , 5 waste pipe for wash basin c.p. 32mm dia., , 7 structual steel m.s. channel, joints, tee, gusset plate ete., , vitrified granite tiles 8 mm to 10 mm thick 24" x 24" size dark shade, , 9 white vitrious china w.c. sqatting pan (indian type), , -0 white vitrious china 'p' or 's' trap, , 11, , white vitrious ching wash down w.c. (european), , 42 m.s angel, , 43 vitrified granite tiles 8 mm to 10 mm thick 24" x24" size light shade, , 44, , m.s. sheet 1 mm thick, , 45, , pillar tap 15 mm dia., , 46, , polished kota stone slab green 25mm thick, , 47, , paver block m200 grade 60 mm thick, , 48, , common burnt clay bricks conventional size, , 49, , g. i. sheet 0.8 mm thick corrugated class-3, , 50, , galvanised mild steel tube medium grade 40 mm dia., , 51, , hire charges for road roller, , 52, , white lime (white washing), , 53, , r.c.c. heavy duty non-pressure pipe i.s.class np3-600 mm dia., , 54, , gun metal screw down bib tape 15 mm dia, , 55, , crushed stone aggregate 40mm size, , 56, , white glazed tiles 15 cm x 15 cm x 6 mm, , 57 ci or ms brackets, , 58, , brass screw down bib tape 15 mm dia, , 59, , white vitreous china sink 600mm x 450 mm x 150 mm, , 60, , brass screw down stop cock 25 mm dia, , 61, , ci cover with frame 455 mm x 610 mm, , 62, , water profing cement paint, , 63, , cement concret mixer, , 64, , drilling of 215 mm dia. bore in over burden strata including lowering and fixing of 175 mm, , , nominal dia upvc pipe up to required depth and further drilling of 165 mm dia bore hole in rocky strata by d111 ng, , manufacture, supply and delivery of isi marked upvc casing pipe (18-12818 )175 mm nominal dia "cs" type, , providing and supplying single phase borwell submersible pump motor set with control panel of 20 lpm, 110 mt head and 1.5 hp., , pvc insulated flat submersible cable as per detailed technical specifications of r/c of gwssb conforming to is 694, iec 60227 60228. 1 r x 30 x 4.0 mm, , manufacture, supply and delivery of following isi marked (is: 4984/1985 with latest amendment) having material grade pe-80 in requirement at site with ss-316 nipple at both end having 11 t?? threading dn-40, pn-10., , lowering of single phase submersible pump set complete with required length of hdpe pipe & cable in bore well and fitting up to 90mt depth, , electrification, , nails 50 mm long, , centering and shuttering, , water tanker 6 kl capicity,

Rcc Stud Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government