Latest rcc trough Tenders | Government rcc trough Tenders

State Government

CTN :45309756

05 Jun, 2026 2.47 Lacs

Ajmer - Rajasthan

Tender For construction of new toilet and training shade ncc ajmer (addl septic tank and plinth protection work)

corporations/Associations/Others

CTN :45311574

03 Jun, 2026 NA

Angul - Odisha

Tender For construction of rcc trough wall to rasol minor from rd 1250m to rd 1275m and rd 2975m to rd 3000m of sapua badjore irrigation project

corporations/Associations/Others

CTN :45311583

03 Jun, 2026 NA

Angul - Odisha

Tender For construction of rcc trough wall to bahalunda sub minor from rd 20m to rd 60m of sapua badjore irrigation project working rd from 20m to 77.50m

corporations/Associations/Others

CTN :45311585

03 Jun, 2026 NA

Angul - Odisha

Tender For construction of rcc trough wall in panchapada sub minor from rd 820m to 850m of sapua badjore irrigation project working rd from 820m to 883m

corporations/Associations/Others

CTN :45312558

11 Jun, 2026 44.08 Lacs

Saharanpur - Uttar Pradesh

Tender For work for distribution transformer plinth fencing and earthing

CTN :45275091

28 May, 2026 5.38 Lacs

Chandigarh - Chandigarh

Tender For providing & fixing of sanitary items and allied work in model jail sector- 51, u.t. chandigarh (fansi chakki, midday meal, music room) - excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10, all kinds of soil .2.10.1, pipes, cables etc, not exceeding 80 mm dia. .2.10.1.1, pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia metre .2.10.1.2, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : .4.1, 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.4, 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) .4.1.10, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and size in : .6.4, cement mortar 1:6 (1 cement : 6 coarse sand .6.4.2, providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (size 300mm x 600mm) .8.31, providing and fixing aluminium sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is : 1868), transparent. .9.96, 250x16 mm .9.96.2, as per detail attached ., providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete .9.97, 200x10 mm .9.97.2, as per detail attached ., providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : .9.1, 125 mm .9.100.1, as per detail attached ., providing and fixing pressed steel door frames conforming to is: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including m.s. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by engineer-in-charge: .10.14, profile b .10.14.1, fixing with adjustable lugs with split end tail to each jamb .10.14.1.1, providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. .11.56, polished granite stone slab of all colour and texture exceptblack,

CTN :45290770

29 May, 2026 3.16 Lacs

Ernakulam - Kerala

Tender For mla-sdf- kothamangalam lac- 2025-26- setting up of open gym equipments at ward 15, kothamangalam municipality, ernakulam district - construction of open gym, 2.6.1:earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources), 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more, 5.9.1:centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete, 16.83:taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge., od289920/2025-2026:walker single- providing and fixing walker single fnf 004- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe- for leg frame, minimum 25 nb gi c-class pipe for handle frame, nylon 66 injection moulded casing clamps, lldp root molded seat with inbuilt bolts 3/8" x 1.5" foot rest, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289924/2025-2026:rider- providing and fixing fun rider (fnf 002)- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe for seat frame, minimum 40 nb & 25 nb c class gi c-class pipe for handle frame, minimum 32nb & 25nb gi c-class pipe with two handles for leg rest, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest & seat rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat., od289921/2025-2026:ski trainer- providing and fixing ski trainer- fnf 014- minimum 100 nb g.i. c class pipes for main frame, minimum 40 nb g.i. pipe for foot rest pipe, minimum 40nb & 25 nb g.i. pipe for handle, minimum 25 nb & 40 nb gi c-class pipe for connecting pipe, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289922/2025-2026:abb trainer- providing and fixing abb trainer - fpspcl187- minimum 80 nb gi c- class pipe for main frame, minimum 32 nb gi c-class pipe for side frame, minimum 25 nb g.i. pipe for intermediate pipe, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat ., od289923/2025-2026:cycle- providing and fixing cycle - fpspcl208 - 25 nb & 40 nb gi c-class pipe for main frame, 32 nb gi c-class pipe for seat frame, 25 nb

CTN :45239307

25 May, 2026 66.14 Lacs

Trivandrum - Kerala

Tender For construction of branch office for national centre of diseases control at iranimuttom, trivandrum sh re construction of damaged compound wall with retaining wall and brick work above plinthsubwork/packages:re construction of damaged compound wall with retaining wall and brick work above plinth

CTN :45231165

29 May, 2026 41.95 Lacs

Kalahandi - Odisha

Tender For construction of rcc trough wall lining at rd 2070 m to rd 2400 m of kalampur minor and rd 00 m to 120 m of kalampur flood zone and renovation of hume pipe at, rd 2060 m of kalampur minor.

CTN :45231180

02 Jun, 2026 52.48 Lacs

Kalahandi - Odisha

Tender For construction of rcc trough lining from rd-11215m to rd-11365m including raising and strengthening of canal bank from rd-10000m to rd-13255m of jaring distributary

Rcc Trough Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others