Latest rear axle shaft Tenders | Government rear axle shaft Tenders

Central Government/Public Sector

CTN :45321831

30 May, 2026 1.07 Lacs

Bhandara - Maharashtra

Tender For replacement of 31 flc rope of winder of 2nd vertical shaft of chikla mine.

CTN :45317847

04 Jun, 2026 50.0 Thousand

Tinsukia - Assam

Tender For supply of injector assy , timing belt , rear axle shaft , kit slave cylinder , spark plug

CTN :45068641

03 Jun, 2026 25.42 Lacs

Guna - Madhya Pradesh

Tender For repairing of raw water vertical turbine pump bowl assembaly and spares under ww np guna - :supply of spares for raw water turbine pump ke boul asembly pamp spares under ww np guna, raw water vertical turbine pump ki bowel assembaly nikalna, raw water vertical turbine pump ki bowel assembaly ko repair kar lagana, turbain pump lifting and lowering work 177 hp, replace bush bearing, replace pump ki shaft, replace neck ring, empeller badelna, adjust nut, vhs motor, hax nut bolt h/d, water deflaculater, gland, hex cap screw h/d, lantern ring, packing, packing box bearing, packing box, head shaft with key, discharge head, sole plate, foundation bolts, hax cap screw h/d, top colum pipe, inter line shaft (120lg), inter collum pipe, line shaft coupling, line shaft bearing, bearing retainer, line shaft sleaves, bottam line shaft, pump shaft coupling, bottam collum pipe, pump shaft coupling, bearing for dcase, discharge case, bearing for bowl, bowl, thrust ring, thrust ring retainer, impeller key, impaller, seal ring, bearing for s,bell, suction bell, pipe plug, basket retainer, line shaft (10 ft. long), turbine pump housing 177 hp, turbine gun matel 177 hp, reached + puli+charre 177 hp, l. n. key

CTN :45096857

01 Jun, 2026 9.86 Lacs

Srinagar - Jammu And Kashmir

Tender For corrigendum : supply, installation, testing and commissioning of 100 hp vertical hollow shaft 3 phase, 980 rpm induction motor for 20 cusec vt pump and allied works at li/dws takanwari old.

CTN :45305833

08 Jun, 2026 35.94 Lacs

Faridabad - Haryana

Tender For beautification works in including play equipment, open gym, plantation and repairing of boundary wall at brahampuri park saran village boosting park in ward no. 09 nit faridabad.(recall) - labour charge for making tee connection with existing line excavation, cutting jointing and making connection with existing line complete in all respect, supply and fixing of pvc tee 150x150x150mm dia., chain swing (2seater): 10 l x 6 w x 8 .5 h. horizontal frame and vertical legs is of m.s. pipe 2 x 12 gauge. it stays with m.s. pipe 1 x 12 gauge. swinging seats-2nos is of frp molded seat of 2mm thick fitted with m.s. pipe frame x 12 gauge which hang with m.s. chain 6mm thick duly plated with ball bearing and m.s. flat 6mm thick housing. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., sea saw (4seater): - 8 l x 5 .5w x 15 high. frame is of m.s. pipe 2 x 12 gauge. sitting planks is of m.s. pipe 2 x 12 gauge and its cantilever and handles is of m.s. pipe x 12 gauge. sitting seats 4 nos. is of molded frp material in 3mm thick with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and labor at site., bridge ladder: 10 l x 2 w x 6 h. horizontal ladder is of m.s. pipe 2 , andamp: vertical ladder is of same material of 12-gauge isi mark with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division). complete item with gst, transportation, installation with c.c and amp: labor at site., merry-go-round (4-seater): 5 dia. main frame is of m.s. sq. pipe 2 x 2 x 14 g and having suitable handle andamp: foot-rest is of round pipe x 12 gauge. central pipe is of m.s. pipe 3 x 12 g with heavy duty shaft 50mm thick andamp: ball bearing assembly. it consists of 4no chair made of molded frp plastic. complete with epoxy primer (interseal 670 hs) and pu finish (interthane 990) paints (protective coating division) in multi colors item with gst, transportation, installation with c.c and amp: labor at site., pvc reducer 150mm x 100mm.., frp dustbin (tilting type) of capacity 60 ltr. body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. it fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with epoxy primer interseal 670 hs and pu finish (interthane 990) paints. complete item with gst. transportation, installation with cc and labor at site., making connection with existing sewer main line, p/f of pvc 100mm dia bend., supply of pvc pipe 150 mm dia with isi mark 8kg.cm2 pressure, supply of good earth complete as per site requirement, p/f chest press is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 32mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi-pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from roto-moulde. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used., p/f seated puller is made from is-1239 b class gi-pipe. the center pipe is of 100mm nb made from b class gi-pipe, and the bottom support is of ms round plate of 250mm dia and 10mm thick is welded at the bottom of the pipe. the remaining frame is made of 50mm and 25mm nb b class gi-pipe. the handle frame and seat is made of 32mm nb b class gi pipe. connecting rod is made from 25mm nb b class gi-pipe. seat is made from ms sheet of 2mm thick. for the assembly different bushes are used which is made from 60mm with 3mm thick seamless pipe is used, p/f sky walker is made from is-1239 b class

State Government

CTN :45301000

01 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For procurement of internal spares of esp u#04 coh. - plain bearing (modified), pin wheel big. outer part, bhel faa-5x36-2x84125-2 pin wheel small, support bearing for vertical shaft, fastnrs m 16 x 70, fastnrs m 16 x 100, fastnrs m 12 x 50, ht 8.8 grade metric plain hex nut m 16

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

CTN :45245074

26 May, 2026 NA

Mumbai - Maharashtra

Tender For procurement of spare parts for tata winger make vehicles under the fleet of ex eng tr w s division - twin pot calliper assly rh tata winger, twin pot calliper assly. lh tata winger, assly.differential worm forged gear kit tata/w, differential housing assly. tata /w, assly. differential comp. tata /w, rear axle shaft tata

Central Government/Public Sector

CTN :45277069

11 Jun, 2026 NA

Multi City - Multi State

Tender For phosphatation of cat a fabricated spares - blind nut , plain pin , anchoring bolt, , nut, , spacer, , eye end fitting rh thread, , eye end fitting lh thread, , drive shaft, , tail rotor shaft, , axial control drum shaft, , shaft vertical, , washer cap, , slotted nut, , screw, , banjo bolt, , screw

Central Government And Public Sector

CTN :45255394

09 Jun, 2026 NA

Bangalore - Karnataka

Tender For helical worm gearmotor for long conveyor b shop and stn-4 main outgoing chip conveyors machine chip conveyor to model no-sk 42125-100lp/4 tf of m/s nodes and loads or equivalent 1) acceptable make of gear box-nodes and loads,power build,new allen berry,shanthi gears, sew.2) acceptable make of motor-abb,bharath bijlee,nodes and loads,siemens,crompton greaves,sew ,technical specification: 1) power -2.2 kw, 2) input speed-1460 rpm ,3) output speed-19 rpm ,4) ratio-76.95 ,5) output torque- 894 nm, 6) voltage-230/400 v, 7) frequency-50hz ,8) efficiency class-ie3 ,9) enclosure-ip55, 10)type of housing-foot mount, 11) mounting position-m4(should be capable for horizontal and vertical mounting without any modification) ,12) output shaft-solid keyed shaft,13) output shaft diameter-60 x 120mm. 14) motor cooling -tefc 15) service factor-2.5. 16) the motor used shall be without any modification either on shaft/ flange.17) mounting hole to hole -180mm x 200 mm.18) mounting hole dia-22mm.19) warranty: 18 months from the date of supply or 12 months from the date of commissioning. 20) motor inverter speed range standard line powered - inverter capable(motor should be designed to work with vfd in the range 25hz to 65hz. 21) base weight-125 kg maximum. 22) the overall length shall not exceed 700 mm. 23)gear motor should be unicase(housing (casing) is made as a single, integral unit) type. special conditions 1)the offerer shall furnish technical specification catalogue/data sheet duly indicating dimensional details, torque value and motor details during tender participation and along with material supply.2) only authorized dealers or manufactures of above mentioned makes shall participate in tender.3) drawing of modelno- sk 42125-100lp/4 tf is attached for reference only. [ warranty period: 18 months after the date of delivery ] ]

Rear Axle Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government And Public Sector