Latest reboiler scrap Tenders | Government reboiler scrap Tenders

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130

corporations/Associations/Others

CTN :40970625

18 Jul, 2025 1.11 Crore

Bhopal - Madhya Pradesh

Tender For construction dic office building, chowkidar quarter, 15 kw solar panel, water harvesting, drilling of tubewel, road side greenry and boudary wall work at at mandla district mandla (m.p.)

State Government

CTN :40941208

08 Jul, 2025 NA

Chandrapur - Maharashtra

Tender For material required gp kanpa tah nagbhid dist chandrapur - 80 mm. metal white-(hand broken metal) with royalty, 40 mm metal white- (hand broken metal) with royalty, 20 mm, , , , , 16 mm, 81 mm. metal white-(hand broken metal) with royalty, khila, , paver block, , , , steel hollow door frame, c.r.c sheet work, ms (grill work), vindow, tractar bhada, saddle, , ms (grill work), vindow, tractar bhada, saddle, , steel, , ferud, birla white, , , gi pipe, tank connector, rope waterproof, ms tank structure, gi tank structure, ms angle, j bolt, ms pipe, gi sheet, led light 14 watt, led light 12 watt, led light 80 watt, led light 100 watt, gi barbed wire, rcc modern bench (3 sheet), solar lugs, d c fuss, distic watar, m.s. pipe 1.5x1.5, m.s. plat, solar pannel, rcc pipe 600 mm, rcc pipe 450 mm, rcc pipe 300 mm, pvc pipe 150 mm, mat finish stainless steel (302 grade), inwell bore driling, battery lithium, led light 24 watt, semi integrated solar light, brekar, ro 12 ltr aqua, ro 25 ltr aqua, m.s. pipe 2x2, m.s. pipe 3x3, m.s. pipe 4x4, m.s. pipe 1x1, rcc pipe 900 mm, rcc pipe 800 mm, solar panel connector, dc wire, 75 wp spv module, ms powder coated battery box, ac wire, solar pump controller 1 hp, nipples, hdp pipe, gi l socket, cotter pin, inwell bore pipe, dustbin, profile sheet, g.i. sheet, jsb, jcb, murum/80mm/40mm metal compaction, , needle tyap, 2 nos, profile sheet screw, chain line fencing, putty, oil paint, oil bond destember, water proof cement paint, praymar dimond cut kota stone 2x2, style verified 2x2, ceramic tiles wall mattfinish ceramic tiles 30cmx30cm, chequered tiles 30cmx30cm, cement chechekr styles, sintex, nal toti, 15 mm walve, 25 mm walve, 32 mm walve, cpvc pipe 15mm, cpvc pipe 15mm, cpvc pipe 20mm, cpvc pipe 50mm, cpvc elbow 15mm, cpvc elbow 20mm, pvc pipe 90 mm, pvc pipe 110 mm, batching and mixing plant @75 cum, flush door, sink, kadppa, off grid inverter solar, cpvc t 25 mm, cpvc t 32 mm, cpvc t 40 mm, 32 mm pvc pipe, pvc pipe 63 mm, stone dust, 10-12 mm, 80 mm, 40 mm, cpvc 25 mm, cpvc t 20 mm, 12 mm, 10 mm, 08 mm, solar street light dc 14 w led, green mat, 16 mm nutbolt, ro 50 ltr aqua, gi high mast pole, granute stone, solar pump 1 hp, water tanker 5000 lt, cpvc pipe 25 mm, cpvc pipe 32 mm, cpvc pipe 40 mm, , murga, , , , acrylic polymer modified liquid, , cpvc 15 mm , cpvc 20 mm, cpvc 25 mm, cpvc 32 mm, cpvc 40 mm, cpvc 15 mm t

State Government

CTN :40939435

15 Jul, 2025 4.89 Lacs

Jummu - Jammu And Kashmir

Tender For as per boq - drilling of gravel packed bore hole of 250mm diameter and lowering of liner assembly consisting of blind and strainer pipes of 125mm dia. upto 90 mtr by using direct/ rotary / dual rotary method including installation of mark-ii hand pump and construction of platform as per unicef norms / as per site conditions, providing of 125 mm dia. m.s. casing pipe. the 125mm dia. m.s. casing pipe isi marked should have thickness of 5.4mm conforming to as per is 4270 / 2001 medium class (part-i) 2004 (heavy c class) electric resistance welded beveled ended inside beed free pipes. all pipes from inside and outside to be provided with two coats of anti-corrosive paint of superior/approved quality. there should be no circumferential weld. the pipe from inside should be beed free having smooth finish. each pipe shall have subjected to hydraulic pressure test at the manufacturer works in accordance with is 4270/2001 with latest amendments. all the physical and chemical properties of pipe including tensile strength should be in accordance with is 4270/2001 with latest amendments., providing of pea shaped gravel as per is-4097 of 1967 with latest amendments for gravel packing of hand pump, shrouding during lowering of liner assembly, cost of slotting of ms pipe 125 mm dia ( to be charged as per actual), development of bore hole by air compressor of adequate capacity to give clear water free from sand and impurities, providing, fitting, installation, testing and commissioning of submersible pump set (reputed make) of suitable parameters depending upon the depth and discharge of the bore hole. the job includes erection of tripod stand and fixing of chain pulley block. then lowering of submersible pump set in to the bore hole by way of providing and lowering of 32 mm dia. hdpe pipe, submersible cable with fixtures such as rope, clamp, nuts, bolts & washers. fabrication and fitting of well cap. providing, fitting and installation of single-phase starter cum controller panel in sheet enclosure outdoor type conforming to is standard. providing and laying of 3 core submersible cable and 2-core pvc insulated copper conductor of suitable capacity as service line required from lt pole to starter panel of reputed make and fixing of lt control panel on wall by using wall mount fastners. making of electrical connections with the starter panel, service line and submersible pump set after properly thimbling and testing and commissioning thereof. the job includes the cost of material and labour charges. complete job.

State Government

CTN :40926241

09 Jul, 2025 12.60 Lacs

Delhi - Delhi

Tender For maintenance & operation of subways, storm water pumps, fobs & related electrical installation, lt panel board, dg set & dewatering pumps under pwd south east, new delhi.(sh:-sitc of retrofit type emission control device in the exhaust side of 180 kva dg set at sarai kale khan pump house i/c dismantling , making boundary wall and reinstallation of fencing at moolchand pump house under pwd emd south east, new delhi).

CTN :40923727

10 Jul, 2025 9.44 Lacs

Koppal - Karnataka

Tender For sindogi anganavadi building - sinda providing and fixing water closet squatting pan, sinda providing and laying ceramic glazed floor tiles of size 300x300 mm, sinda providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick, sinda providing and laying vitrified tiles in different size of tile 600mmx600mm, sinda painting with synthetic enamel paint of approved brand, sinda finishing walls with acrylic smooth exterior paint , sinda wall painting with acrylic emulsion paint of approved brand, sinda providing and fixing m s grills, sinda providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered upvc matching to ral-9016 sections , sinda providing and fixing wpc wood polymercomposite solid plain flush door shutter of required size, sinda providing and fixing factory made single extruded wpc wood polymer composite solid door, sinda providing and fixing flush door shutter made out of solid core block board, sinda providing salwood frames of doors, sindamason class i with tools, sinda burnt bricks class 35 non modular, sinda binding wire, sinda tmt bars fe 500, sindajungle wood runners and planks, sindacasurina poles 100 - 150 mm, sinda silver oak or equivalent planks 38 mm thick, sindahom of vibrator 0.71 days, sinda plasticizer super plasticizer, sinda size stone 20 x 20 x 25 cms, sinda boulders, sinda mixer (concrete small used in culvert), sinda bond stone 20 x 20 x 45 cm, sinda rubble stones, sinda mixer concrete 1 cum capacity, sinda portland cement, sinda broken stone aggregate 12 mm to 10 mm size, sinda broken stone aggregate 20 mm size, sinda broken stone aggregate 40 mm size, sinda add watering charges at 1 percent on material, sindacoarse sand zone iii, sindagranite/trap broken metal 100 mm and down size

CTN :40923676

16 Jul, 2025 2.47 Lacs

Chitradurga - Karnataka

Tender For procurement of spare parts required for maintenance of drinking water and supply of new motor pumps and panel boards for godabanahal grama panchayath for the year 2024-25 - axel frame(gp rdpr ctd), pvc long caller 4 inch(gp rdpr ctd), pvc long caller 3 inch(gp rdpr ctd), pvc long caller 2inch(gp rdpr ctd), pvc long caller 2.5inch(gp rdpr ctd), pvc end cap 3 inch(gp rdpr ctd), pvc end cap 2.5inch(gp rdpr ctd), pvc end cap 2 inch(gp rdpr ctd), pvc end cap 1.50 (gp rdpr ctd), pvc end cap 1.25 (gp rdpr ctd), pvc end cap 1 inch(gp rdpr ctd), pvc end cap 0.75 inch (gp rdpr ctd), pvc end cap 0.5 inch(gp rdpr ctd), feet ss nipple 1.25 x10(gp rdpr ctd), pvc tehred wall 3 inch(gp rdpr ctd), pvc tehred wall 2.5inch(gp rdpr ctd), pvc tehred wall 2 inch(gp rdpr ctd), pvc tehred wall 1.50 inch(gp rdpr ctd), pvc tehred wall 1.25 inch(gp rdpr ctd), pvc tehred wall 1 inch(gp rdpr ctd), pvc tehred wall 0.75 inch (gp rdpr ctd), pvc tehred wall 0.5 inch(gp rdpr ctd), pvc reducer 1x 0.75 inch(gp rdpr ctd), beed wall 2.5 inch(gp rdpr ctd), beed wall 2 inch(gp rdpr ctd), pvc wall 3 inch (gp rdpr ctd), pvc wall 2.5 inch (gp rdpr ctd), pvc wall 2 inch (gp rdpr ctd), pvc wall 1.05inch(gp rdpr ctd), pvc wall 1.25 inch(gp rdpr ctd), pvc wall 1 inch(gp rdpr ctd), pvc wall 0.75 inch(gp rdpr ctd), pvc wall 0.5 inch(gp rdpr ctd), pvc t 7 inch(gp rdpr ctd), pvc t 4 inch(gp rdpr ctd), pvc t 3 inch(gp rdpr ctd), pvc t 2.5 inch(gp rdpr ctd), pvc t 2 inch(gp rdpr ctd), pvc t 1.5 inch(gp rdpr ctd), pvc t 1.25 inch(gp rdpr ctd), pvc t 1 inch(gp rdpr ctd), pvc t 0.75 inch(gp rdpr ctd), pvc t 0.5 inch(gp rdpr ctd), pvc elbow 7 inch(gp rdpr ctd), pvc elbow 4 inch(gp rdpr ctd), pvc elbow 3 inch(gp rdpr ctd), pvc elbow 2.05 inch(gp rdpr ctd), pvc elbow 2 inch(gp rdpr ctd), pvc elbow 1.5 inch(gp rdpr ctd), pvc elbow 1.25 inch(gp rdpr ctd), pvc elbow 1 inch(gp rdpr ctd), pvc elbow 0.75 inch(gp rdpr ctd), pvc elbow 0.5 inch(gp rdpr ctd), pvc collar 7 inch(gp rdpr ctd), pvc collar 4 inch(gp rdpr ctd), pvc collar 3 inch(gp rdpr ctd), pvc collar 2.50inch(gp rdpr ctd), pvc collar 2 inch(gp rdpr ctd), pvc collar 1.50 inch(gp rdpr ctd), pvc collar 1.25 inch (gp rdpr ctd), pvc collar 1 inch (gp rdpr ctd), pvc collar 0.75 inch (gp rdpr ctd), pvc collar 0.5 inch(gp rdpr ctd), pvc sadal 90mm (gp rdpr ctd), pvc sadal 75mm (gp rdpr ctd), pvc sadal 63mm (gp rdpr ctd), solavent 100 ml(gp rdpr ctd), salake(gp rdpr ctd), celing waser(gp rdpr ctd), caplings(gp rdpr ctd), bolt nut 12 mm (gp rdpr ctd), bolt nut10 mm(gp rdpr ctd), chian nut 10mm(gp rdpr ctd), water tank 1000ltr(gp rdpr ctd), cp gm pushcoc 0.75 inch (gp rdpr ctd), cp gm pushcoc 0.5 inch(gp rdpr ctd), screwdruver (long)(gp rdpr ctd), bore cap 6 inch (gp rdpr ctd), bore cap 7 inch (gp rdpr ctd), bore cap 8 inch (gp rdpr ctd), piperich 10 inch (gp rdpr ctd), pipe rich 18 inch (gp rdpr ctd), piperich 24 inch (gp rdpr ctd), cuttingpiller(gp rdpr ctd), axel blade(gp rdpr ctd), frb pipe(gp rdpr ctd), bore clamp(gp rdpr ctd), nipple 0.75x18(gp rdpr ctd), nipple 0.75x12(gp rdpr ctd), nipple 0.75x9(gp rdpr ctd), nipple 0.5x18(gp rdpr ctd), nipple 0.5x24(gp rdpr ctd), nipple 0.5x9(gp rdpr ctd), nipple0.5x12(gp rdpr ctd), nipple 0.5x6(gp rdpr ctd), pvc pipe 7 inch(gp rdpr ctd), pvc pipe 4 inch(gp rdpr ctd), pvc pipe 3 inch(gp rdpr ctd), pvc pipe 2.5 inch(gp rdpr ctd), pvc pipe 2 inch(gp rdpr ctd), pvc pipe 1.5 inch(gp rdpr ctd), pvc pipe1.5 inch(gp rdpr ctd), pvc pipe 1 inch(gp rdpr ctd), pvc pipe 0.75 inch(gp rdpr ctd), pvc pipe 0.5 inch(gp rdpr ctd), gi brass value 2(gp rdpr ctd), gi ci value 3(gp rdpr ctd), gi raducer 1(gp rdpr ctd), gi raducer 0.75 inch (gp rdpr ctd), gi raducer 0.5(gp rdpr ctd), gi tap 1(gp rdpr ctd), gi tap 0.75 inch (gp rdpr ctd), gi tap 0.5 inch(gp rdpr ctd), gi reducer 1.75 inch(gp rdpr ctd), g i bend .75 inch(gp rdpr ctd), cable/meter 4mm (gp rdpr ctd), gi coller 1.25 inch (gp rdpr ctd), planze sat g i 2(gp rdpr ctd), nrv wight plat 2(gp rdpr ctd), nrv washer 2(gp rdpr ctd), nrv 2(gp rdpr ctd), gi pipe 1.25 inch

State Government

CTN :40928743

07 Jul, 2025 NA

Kalwan - Maharashtra

Tender For providing and supply material for the development works through the gram panchayat office nanduri during this financial year 2025-2026 at nanduri tal. kalwan dist-nashik pin code-423501 - providing and supply material, cement, steel, cement roop, angal steel, caluers koted rufing sit, steel rufing sit, paving block 40 mm, paving block 60 mm, paving block 80 mm, steel pipe, water tank, 6" cement block, 4" cement block, 9" cement block, cement door, pvc door, chain ling net, spatex styles, cheker styles, wall styles, kadapa (marbals), cement window, window bar, cement pipe 1", cement pipe 1.5", cement pipe 2", cement pipe 2.5", cement chember, toilet spot, cement poll, biding wire, hooks, basin spot, cement daphe 1.5*2, cement daphe 2*2, cement daphe 2.5*2.5, cotting door, polish shababad, cement bench, doctor fixit liquid, colour, acied, 1/2" pvc pipe, 3/4 pvc pipe, 1" pvc pipe, 1 1/2" pvc pipe, 2" pvc pipe, 2 1/2" pvc pipe, 3" pvc pipe, 4" pve pipe, 1/2" u pvc pipe, 3/4 u pvc pipe, 1" u pvc pipe, 2" pvc pipe, 21 l pvc pipe, 3" pvc pipe, 4" pvc pipe, 7" pvc pipe, coluer disteper, wall putti chuna, ced sheet light, service wire bundal, service wire bundal, two pin cable holder, panel board, cable bandal 4x40, cable bandal 7x52, hdp pipe 21/8, hdp pipe 3", elbo cupler, electric moter, binding wire hooks, 16 no gi wire, 3/4 tap bandal, campartment, agri culture machine, agri culture tools, sluice valve isi - 50 mm dia, sluice valve isi - 65mm dia, sluice valve isi - 80 mm dia, sluice valve isi - 100 mm dia, sluice valve isi - 125 mm dia, sluice valve isi - 150 mm dia, sluice valve isi - 200 mm dia, sluice valve isi - 250 mm dia, c i d joint - 80 mm dia, c i d joint - 100 mm dia, c i d joint - 125 mm dia, c i d joint - 150 mm dia, c.i.non return vaive isi mark 50 mm dia, c.i.non return vaive isi mark 65 mm dia, c.i.non return vaive isi mark 80 mm dia, c.i.non return vaive isi mark 100 mm dia, c.i.flange heavy duty 50 mm dia, c.i.flange heavy duty 65 mm dia, c.i.flange heavy duty 80 mm dia, c.i.flange heavy duty 100 mm dia, c.i.flange heavy duty 125 mm dia, c.i.flange heavy duty 150 mm dia, c.i.flange heavy duty 200 mm dia, c.i.flange heavy duty 250 mm dia, c.i.taper cock 1/2", c.i.taper cock 3/4", c.i.taper cock 1", g.i.paip 1/2, g.i.paip 3/4, g.i.paip 1, g.i.paip 1.25, g.i.paip 1.5, g.i.paip 2, g.i.paip 2.5, g.i.paip 3, g.i.paip 4, g.i.l bow 1/2, g.i.l bow3/4, g.i.l bow 1, g.i.l bow 1.25, g.i.l bow 1.5, g.i.l bow 2, g.i.l bow 2.5, g.i.l bow 3, g.i.l bow 4, g.i. tee 1/2, g.i. tee 3/4, g.i.tee 1, g.i.tee 1.25, g.i.tee 1.5, g.i.tee 2, g.i.tee 2.5, g.i.tee 3, g.i.tee 4, g.i. socket 1/2, g.i. socket 3/4, g.i.socket 1, g.i.socket 1.25, g.i.socket 1.5, g.i.socket 2, g.i.socket 2.5, g.i.socket 3, g.i.socket 4, g.i. union 1/2, g.i. union 3/4, g.i.union 1, g.i.union 1.25, g.i.union 1.5, g.i.union 2, g.i.union 2.5, g.i.union 3, g.i.union 4, upvc pipe 1/2 6 miter, upvc pipe 3/4 6 miter, upvc pipe 1 6 miter, upvc pipe 1.25 6 miter, upvc pipe 1.5 6 miter, upvc pipe 2 6 miter, upvc l bow 1/2, upvc l bow3/4, upvc l bow 1, upvc l bow 1.25, upvc l bow 1.5, upvc l bow 2, upvc tee 1/2, upvc tee3/4, upvc tee 1, upvc tee 1.25, upvc tee 1.5, upvc tee 2, upvc coupler 1/2, upvc coupler3/4, upvc coupler 1, upvc coupler 1.25, upvc coupler 1.5, upvc coupler 2, upvc union 1/2, upvc union3/4, upvc union 1, upvc union 1.25, upvc union 1.5, upvc union 2, upvc nipple 1/2, upvc nipple3/4, upvc nipple 1, upvc nipple 1.25, upvc nipple 1.5, upvc nipple 2, pvc solvent 100 gm, pvc solvent 250 gm, upvc solvent 100 gm, upvc solvent 250 gm, starter l t dual dmc 950, starter l t dual l t 1650, starter star delta dmc 3800, starter star delta l t 5300, alum service wire 3 core 6 mm, alum service wire 3 core 8 mm, alum service wire 3 core 10 mm, alum service wire 3 core 12 mm, 3 core copper cable 1.5 mm, 4 core copper cable 2.5 mm, 5 core copper cable 4 mm, 6 core copper cable 6 mm, 7 core copper cable 10 mm, motor vertical v9- 3 hp, motor vertical v9- 5 hp, motor vertical v9

CTN :40719381

07 Jul, 2025 NA

Jabalpur - Madhya Pradesh

Tender For tender invited for purchase of electric item at principal district and session court jabalpur -light accessories tubelight 20 watt led bulb 18 watt led bulb 09 watt bulb 100 watt bulb 200 watt ther pin tape wire 1.5 mma wire 2 core 0.50 mma electric tape 1.5 mm. 03 core wire extension board wooden 04 switches, 04 sockets doorwell dingdong a 2x2 led panel light ceiling, dbb(tt)g 03 f.c.m 63 a.(100 m) c 40a fan condenser bajaj 2.5 dbb 3.5 core armoured cable 25 mma lug 25 mm ring type lug 12.5 mm ring type led 50 watt street light delivered wall light hammer dill machine 1000 watt, bhed 08 model, 2x2 panel light bajaj/anchor check model no. ihq 36 100 m interior lighting kit (240 mm 50/60 mm) uvcams dev. ihq 40 035 12.75 u complete set light driver, 16 ampere switch button, 16 ampere socket, 06 ampere socket, 06 ampere switch, indoor lighting unit set ihq18a indoor lighting unit set ihq12a 3 model seat, 30 watt l.e.d bulb, 06 model seat, 12 model seat, 04 model seat, 04 m.f. d. candle, cooler water pump, 01 switch 01 button 16 ampere board, anchor rider switch 06 ampere doorwell switch, chb grip, chb grip, p.o.p screw black, p.o.p screw black, p.o.p screw black, p.o.p screw black, p.o.p screw black, p.o.p screw black, 02 inch hole normal thick, steel hole 2.5 inch, steel hole 3 inch, hexagon blade, three phase connector with support 06 inch

State Government

CTN :40896021

15 Jul, 2025 3.03 Lacs

Darjeeling - West Bengal

Tender For supply,delivery and installation of 15 - 25 hp pdb cum mcc wall mounted panel at purba madati water supply scheme tw no-ii under nmd,phe.dte,darjeeling.

Reboiler Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

corporations/Associations/Others

State Government

State Government

State Government

State Government

State Government