Latest rebound hammer test Tenders | Government rebound hammer test Tenders

CTN :45558066

25 Jun, 2026 NA

Mohali - Punjab

Tender For supply of concrete test hammer (rebound hammer) (q3) , laser distance meter (q3) , digi level 60 , digital ultrsonic material thickness gauge , digital concrete thickness tester , ph meter , carpenter tool kit , plumber tool kit , power 16 tom hydaulic crimping tool dies 10 sqmm copper aluminium terminal , earth discharge rod heavy duty for 11 kv lines , 6t hydraulic metal wire cable cutter , digital voltage tester pen , digital sound level meter with lcd display 30-130 , digital tachnometer control type red display power range 60 rpm to 50000rpm , voltage tester pen led high brightness , electric screw driver

CTN :45559939

30 Jun, 2026 22.40 Lacs

Sonipat - Haryana

Tender For supply of deflection of curved member apparatus , shear centre apparatus , portal frame apparatus , two hinged arch apparatus , cable geometry and statics apparatus , unsymmetrical bending apparatus , bending moment and shear force apparatus , maxwell reciprocal theorem apparatus , deflection of continuous beam apparatus , slope and deflection apparatus , behaviour of column and beams apparatus , elastic properties of deflection beam apparatus , two hinged arch apparatus , analysis of elastically coupled beam apparatus , pin joint truss apparatus , analysis of redundant joint apparatus , discharge over notches apparatus , pitot tube setup , impact of jet on vanes apparatus , digital handheld water velocity meters , tilting open bed flow channel flume , automatic traffic classification and counting counter , length gauge with isi certification mark is 2386 part i , speed gun speedster iii , gopro hero camera with tripod stand , thickness gauge with isi certification mark is 2386 part i , 75 mm sieve , 63 mm sieve , 50 mm sieve , 37 point 5 mm sieve , 25 mm sieve , 12 point 5 mm sieve , 9 point 5 mm sieve , 4 point 75 mm sieve , 2 point 36 mm sieve , gi pan and lid , 1 point 18 mm sieve , 600 micron sieve , 300 micron sieve , 150 micron sieve , 75 micron sieve , brass pan and lid , aggregate impact tester is 2386 part iv , crushing value apparatus is 2386 part iv , bitumen penetration kit is 1203 , flash point open and fire point cleveland is 1448 part 69 , ring and ball apparatus semi automatic is 1205 * /bid number : gem/2026/b/7615986 + /dated: 15-06-2026 ' ' / bid document 1 / 30

State Government

CTN :45481841

29 Jun, 2026 1.18 Lacs

Sarni - Madhya Pradesh

Tender For enquiry of work for conducting upv and rebound hammer test on tg bearing pedestal no. 04 of unit no. 11 of ph-iv, stps, mppgcl, sarni.

corporations/Associations/Others

CTN :45492328

24 Jun, 2026 30.85 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of , taflon gland rope seal oil valve size 4x4 sqmm , taflon gland rope seal oil valve size 6x6 sqmm , taflon gland rope seal oil valve size 8x8 sqmm , taflon gland rope seal oil valve size 10x10 sqmm , m s coupling bolt for dc seal of oil pump full thread , galvanized ht nut bolt with 2 nut 2 flat washer 1spring washer 12x75 mm pitch 1point 5 mm full thread , nipple for h2 gas filling regulator 36x34mm brass make , o ring of size od 50mm id 44mm thick 3mm , o ring of size od 52mm id 44mm thick 4mm , o ring of size od 55mm id 45mm thick 5mm , o ring of size od 60mm id 54mm thick 3mm , copper pipe id 5mm od 8mm length 2mtr , copper washer id 8mm od 14 mm thickness 2mm , industrial h2 gas filling pipe reinforced by wire mesh id 10mm od 16mm , oil gauge glass set with fitting for hydraulic tank , industrial grade h2 gas filling regulator for a generator of a 200mw unit inlet pressure 125 150kg cm2 outlet pressure 3 4kg cm2 safety and testing as per peso guidelines , perplex container for 15 75 kv bus duct complete set , portable hydrogen gas leak detector , brass make hexagonal nut for h2 filing post valve , caf jointing sheet 59 oil 1 0 mm 1x2 meter , ms coupling bolt for ac seal of oil pump full thread , dc seal oil pump rpm 2900 head 120m complete mechanical seal set single inside , ac seal oil pump rpm 2900 head 120m complete mechanical seal set single inside , 1cx2 5 sq mm 1 1kv grade single core cu conductor pvc bundle of 90m red yellow blue insulated wire as per is 694 make havells , ss 304 bolt with 2 nuts 2 flat washers 1spring washer 12 5x70 half thread , handheld insulation tester megger 1kv type rechargeable make megger , digital multimeter , roller bearing no 306 , caf jointing sheet 59 oil 2 0 mm 1x2 mete , caf jointing sheet 59 oil 3 0 mm 1x2meter , caf jointing sheet style 54 n m 0 5mm 1x2 meter , caf jointing sheet style 54 n m 1 5mm 1x2 meter , brass bolt with fixed washer and 1 flat washer for slip ring carbon brush size 6x12mm , brass make extension nipple for h2 post valve , brass make hexagonal nut 2 flat washers and 1 spring washer for the co2 filling post valve , brass nut bolt and 1 no fixed and 1 no flat washer for slip ring 8x35mm , brass plug for h2 gas cooler , brass plug for seal oil cooler , brass strip for slip ring carbon brush holder 17x47x1 soft metal as per sample , insulating flat washer made of glass textolite 5mm thick id 10mm od 26mm , insulating flat washer made of glass textolite 5mm thick id 12mm od 28mm , insulating flat washer made of glass textolite 5mm thick id 18mm od 40mm , insulating flat washer made of glass textolite 5mm thick id 22mm od 44mm , insulating flat washer made of glass textolite 5mm thick id 24mm od 48mm , insulating flat washer made of glass textolite 5mm thick id 26mm od 50mm , insulating flate washer made of glass textolite 5mm thick id 28mm od 52mm , insulating fiber sleeve having dimension id 10mm od 13mm length 2mtr , insulating fiber sleeve having dimension id 12mm od 16mm length 2mtr , insulating fiber sleeve having dimension id 16mm od 20mm length 2mtr , insulating fiber sleeve having dimension id 20mm od 25mm length 2mtr , insulating fiber sleeve having dimension id 8mm od 11mm length 5 mtr complete pipe without a cut , insulating fiber glass sheet size 1x2 mtr and thickness 5mm , ss bolt 12 5x80mm half thread thread and micro pitch with following size 12 5x80 mm , ss bolt with 2 nut 2 flat washer 1spring washer having micro thread and micro pitch with following size 12x80 mm , ss bolt with nut and 2 no flat washer and 1 no spring washer having micro thread and micro pitch with //bid details 2 / 93 following size 36x70 mm , bimetallic strip 100x50 mm , gun metal make carbon brush holder for generator , pvc hose pipe 1 point 25inch , hydraulic tank looking glass looking glass transparent toughened heat resistant up to 300 deg c glass thickness 14mm moc toughened glass with sealing , damper tank looking glass looking glass transparent toughened heat re

State Government

CTN :44231929

17 Jun, 2026 NA

Jamnagar - Gujarat

Tender For corrigendum : supply of various consumable material at emd -1 lighting dept. stps. - flat cable 3 corex4 sqmm with copper conductor for submersible motor, flexible copper wire 1 corex2.5 sqmm (36/0.3 mm)1100v(1 coil is equal to 90 meter), flexible copper wire 1 corex1.5 sqmm (22 / 0.03) voltage grade up tp 1100 volt conf to is- 694, copper cable 2 cx1.5 sqmm, pvc twin wire 2.5mm sqr., self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of black colour, self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour, porcelin kit kat fuse 16 amp, porcelain kit kat fuse 63 amp, 415 v , ac, porcelain kit kat fuse 100 amp, 415 v , ac, porcelain kit kat fuse 200 amp, 415 v , ac, din rail mounting channels, ring spanner set model 1812 taparia make, double ended spanner set dep 12, adjustable screw spanner size 8" (200 mm) p.no.1171-8 p, screw driver (tester) taparia product no: 818.special with neon bulb, generally confirming to is 5579-1985 grade - ii, yellow handle,, taparia combination plier, product no.1621-8,210 mm, digital insulation tester, range-0-2000 m-ohm, selectable test voltage-250/500/1000 v dc with rechargeable battery, digital clamp on meter lcd display with backlight, 3-3/4 digit., alluminium ladder self supported a type having 05 feet length, long nose plier insulated with thick c.a. sleeve,165 mm length, taparia make tool, allen key set, product no aki 10, allen key set mm size (09 piece) 1.5,2,2.5,3,4,5,6,8,10 mm, hand drill machine size 13mm, hand grinder machine., aluminium tube terminals10.0 mm2, m.6, aluminium tube terminals16.0 mm2, m6, aluminium tube terminal 35 sqmm,m 8, aluminium tube terminals50.0 mm2, m10, aluminium tube terminals70.0 mm2, m8, aluminium tube terminals95 .0 mm2, m10, pin terminal 1.5 mm2, pin terminal 2.5 mm2, aluminium in line connector25.0 mm2,, 35mm alluminium in line connector als-2"dowell", aluminium in line connector 70 mm2, 95 sqmm crimping alluminium type in-line connectors cat no: hai-15 hex make, crimping tools capacity: 10 mm2 to 185 mm2., crimping tools, capacity: 6 mm2 to 50 mm2., alluminum ring type lug 25 sq. mm, pvc saddle 10 mm, pvc saddle 15 mm, pvc saddle 20 mm, pvc saddle 32 mm, multistrend copper flexible wire 1 core x 4.0 mm2, (7 strendes) pvc (double) insulated, without armourr, 1.1kv grade (100m/coil)

CTN :45237530

01 Jun, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of visual inspection and photography performing a visual survey of the building and as per specified in specification document , ultrasonic pulse velocity test for rcc structure in accordanceas per specified in specification document , rebound hammer testas per specified in specification document , core testas per specified in specification document , reinforcement mappingas per specified in specification document , chemical test for rcc structure in as per specified in specification document , half cell potential test for rcc structure as per specified in specification document , carbonation test for rcc structureas per specified in specification document , to check and confirm present as per specified in specification document , to provide recommendation as per specified in specification document , vetting of report from iit nit.

CTN :45322006

01 Jun, 2026 NA

Panipat - Haryana

Tender For rc/purchase of workshop tool / general consumables material (part-1) > - araldite, make- pidilite (1.8kg packing), sr-998, make: pidilite, ( per kg), m-seal (per kg.), make: pidilite, locktite -406 (per 20ml), make: hankle, blue tube paste (set), hold tite (kg.), make-pidilite, rustolene (per ltr), birkosit sealing compound, dunlop adhesive (kg.), safeda (zink white powder) (per kg), graphite powder (kg.), make-vicco, lock tite 641 standard make (50 ml), lock tite 401 standard make (set), safety solvent standard, molikote paste 1000 (pkt./tube), molykot- g rapid plus, molykot- d-321 spary, molykot spray 1000 (400 ml), molykot grease 1000, molykot-z powder (per kg), anabond 666 (100gram), molykot spray l-0500, stag-b compound jointing (per kg), dp test kit set of 03 bottles, make: checkmate, wd-40 spray (400 ml), make- pidilite, brasso (500 ml), puf spray pu foam insulation sealent (750gram), make- abro, roll guard grease, make: j.d jones (per kg), grease unirex n-3, make- mobil (per kg), gadus grease s2 v 100 3, make- sheel (per kg), bearing retainer 660, thread seal 542, fevicol sh (per kg), cold galvansing compound (6017) pure zink undercoating, make- twin tech india pvt ltd., feviquick 50 ml, cotton waste (kg.), marking cloth (mtr.), filter cloth, coton cloth (canvas), size-48 (per mtr), old dhoti, heavy duty forged steel u-clamp (pcs), steel wire brush (pcs.), painting brush size 2 ashoka make, painting brush size 3 ashoka make, painting brush size 4 ashoka make, painting brush size 5 ashoka make, painting brush size 6 ashoka make, steel lock, size-65mm , make- harison, aldrops with accessories, size-12 , material-steel, chargeble led torch 6 to 8 , teflon tape, make- champion, grease gun 2 kg., grease gun 5 kg., grease gun 10 kg., power master make tube expander with main drill shaft and ratchet handle complete set size 45mm, power master make tube expander with main drill shaft and ratchet handle complete set size 90mm, vibration meter, (pcs.), ultrasonic thickness tester (set), measuring tape 3 mtr., make-hi-wide (pcs.), measuring tape 5 mtr., make-hi-wide (pcs.), measuring tape 10 mtr., make-hi-wide (pcs.), measuring tape, 13mm fiberglass water proof, 50 mtr, make- freemans, measuring tape, 13mm fiberglass water proof, 100 mtr, make- freemans, grinder ag-4, make: bosch, grinder ag-7, make: bosch, impact wrench model gds 18e, make: bosch, walkie talkie model-tk3501 make: kenwood (license free), temperature gun, range: 0-2000c, make- fluke, temperature gun, range: 0-5500c, make- fluke, ss paint air spray gun, master level +0.02mm accuracy, size-6 , make- mitutoyo/rsk japan, dial test indicator with magnetic stand, 50mm, make- mitutoyo., shore-a digital rubber hardness durometer (din-53-505,aspm-d,2240) (pcs.), make- eco-sr, drill machine 0 to 10mm make bosch, lead wire 0.5mm (per roll rate required), lead wire 0.7mm (per roll rate required), zig zag clamp, size-3/4 , tube expender with main drill shaft with ratchet handle complete set, make: power master, car washing pressure pump heavy duty, working pressure 125 bar with 40 mtr extra pipe.(jet pump), make: bosch, electronic type weighing scale, range-0.01mg to 100gm, electronic weighing scale suitable upto 2kg, electronic weighing machine, size-600x600mm, cap-200 kg, electronic weighing machine, size-400x400mm, cap-100 kg, electronic weighing machine, size-400x400mm, cap-50 kg, straight shank bit/tapper shank drill bit/ tap set, make- miranda, heavy duty impact socket with hole 19mm for impact wrenach, heavy duty impact socket with hole 30mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 32mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 34mm(suitable for 1 inch square) for impact wrench, heavy duty impact socket with hole 46mm(suitable for 1 inch square) for impact wrench, sa-46 steel socket set, make- taparia, tool goti 34 no., air blower, make- bosch, hot air blower 1500 watt bajaj make (room heat

CTN :45311622

09 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply of lab equipments - beesley s balance count : manual , overall dimension of unit : length x depth x height, 535mm x 140mm x 230mm 21 x 5.5 x 9 , net weight of the unit : 6.2 kg (13.6 lb), gsm cutter cutter type: circular, hand-operated cutting area: 100 cm ; blade : circular hardened stainless steel blade , water bath capacity : 400 ml x 12 pots; maximum temperature : ambient to 90 c; accuracy : 1 c; capacity (in liters) of main both : 25 liters (approx.); pot size : inner dia. : 79 2 mm; length : 122 mm; temperature controller : digital, pt 100 sensor ( 0.1 c accuracy); heater capacity : 3000 watts; bath size : 675 x 235 x 160 mm; power supply : single phase 220vac @ 50hz; consumption : 3050 watts; s ize(wdh) : 1100 x 350 x 250 mm; weight : 25 kg , crock meter rubbing finger shape: cylindrical; diameter: 10 0.1mm; diameter: 10 0.1mm; force: 9 0.2 n; stroke length: 100-110 mm; direction: straight line , back and front , hygrometer measurement range: 20- 80 %rh; accuracy : 2% rh; temperature measurement range: 20 - 30 c; sensor type: capacitive humidity sensor; response time 30 seconds, twist tester gauge length : 2 to 20 inch (5 to 50 cm); counting system : direct result; in-built calculations; readout in dot-matrix display; control system : microcomputer based pre-selectable / pre-programmable solid-state circuitry control user-friendly menus with membrane keypad assembly; programmable parameters : measurement unit, sample length & type, twist direction and speed index, etc.; elongation setting range : - 10 to + 100 mm; tensioning range : 1 to 90 grams (by calibrated augment weights); power supply : single phase 220vac @ 50hz; consumption : 100 watts; applicable standard(s) : astm d1422 / d1423 and is 832; physical dimensions : size (wdh) : 1000 300 200 mm; weight : 12 kg; swift/wheel circumference : 1.5 yards or 1 , yarn appearance board winder tapered board : 01 no. parallel board : 01 no; main unit : 01 no. bobbins holder stand : 01 no., crimp tester measuring length : 60 cm; tension weight : 35g; net weight of the unit: 5 kg., thickness gauge measuring range : 0.010 to 10.00 mm measuring accuracy : 0.01 mm (or) 10 microns readability : 0.01 mm; diameter of anvil : top : 75 0.2 mm physical dimensions : size (wdh) : 150 110 160 mm; weight : 4 kg (accessories included) , wrap reel meter number of leas made at a time : 10 spread of each lea : 20mm 5 counter (three digits) : digital pre-set counter with sensor operating speed : 100 5 rpm motor : 1/8 hp 230v geared motor

CTN :45163054

28 May, 2026 NA

Mumbai - Maharashtra

Tender For bid to ras corrigendum : tender for supply of visual inspection and photography performing as per specified in specification of documents , ultrasonic pulse velocity test for rcc structure in accordance as per specified in specification of documents , rebound hammer test rebound hammer test in accordance with as per specified in specification of documents , core test core cutting and compression test for rcc structure in accordance as per specified in specification of documents , reinforcement mapping as per specified in specification of documents , chemical test for rcc structure in accordance with as per specified in specification of documents , half cell potential test for rcc structure in accordance as per specified in specification of documents , carbonation test for rcc structure in accordance as per specified in specification of documents , providing and installing standard precision as per specified in specification of documents , providing installation 2mm thick as per specified in specification of documents , carry out excavator at as per specified in specification of documents , to assess the existing soil at founding depth by taking as per specified in specification of documents , to assess the structural condition crack patterns as per specified in specification of documents , to provide vetting report from iit mumbai with detailed as per specified in specification of documents

CTN :45238230

28 May, 2026 5.37 Lacs

South Andaman - Andaman And Nicobar Islands

Tender For supply of visual survey visual inspection for surface damages damage classification the visual inspection shall largely cover areas of high distress corrosion moisture , rebound hammer test for determining the estimated compressie strength of concrete and iniformity of concrete , ultrasonic pulse velocity test for ascertaining the quality of concrete uniformity of concrete in terms of soundness and density of concrete , core extraction and testing extracting the concrete core samples following the codal provisions and evaluating the properties , half cell potential test measuring the half cell surface potentials at selected locations on rcc members , carbonation test measurement of carbonation depth by phenolphthalein spray test at selected locations , ph value to check alkanity fo concrete as per relavent , report interpretation and recommendation , report interpretation and recommendation preparing and submitting comprehensive report consisting of findings from visual inspection , repairing methodology and retrofitting scheme for structural serviceability and safety ) /bid number : gem/2026/b/7517515 * /dated: 18-05-2026 & & / bid document 1 / 19

Rebound Hammer Test Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government