Latest receiver tank Tenders | Government receiver tank Tenders

State Government

CTN :45435372

06 Jul, 2026 50.86 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work contract for external surface painting of air receiver tanks and associated lines (installed near air compressor house and foph area) and ash slurry pipe rack up to ph-ii chimney, at 2x600mw, sstpp, mppgcl, dongalia.

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

Central Government And Public Sector

CTN :45709559

15 Jul, 2026 NA

Multi City - Multi State

Tender For air receiver tank of capacity 4 meter cube (4000 liters) as per following technical specifications.size of the shell: -diameter =1260 mm. height of the shell=3150 mm. 1. service: compressed air 2. capacity: 4000 liters 3. orientation: vertical 4. working pressure: 7.0 kg / cm2g 5. operating pressure: 6.0 kg / cm2g 6. hydro test pressure: 10.5kg/ cm2g 7. working temperature: ambient 8. design temperature: ambient 9. vessel dimension: a) diameter: 1260 mm, b) shell length: 3150 mm 10. thickness: a) shell: 10mm, b) dish: 10mm 11. fabrication code: is-2825/asmesecviiidiv1 12.materialofconstruction:is2062oraspertherequirement. 13 .valve: 150mm ball valve- 2 qty (with each air receiver). valve make- valvora/norflow /l&t /normex. 14. surface coating: internal: anticorrosion coating, external: one coat red oxide primer and 2 coats of enamel paint. 15. accessories included: suitable safety valves and pressure gauge. note: (1) air receiver shall be hydraulically tested as per is-2825/asmesecviiidiv-1, and test certificate shall accompany the supply. (2) necessary material test & guarantee certificates shall be submitted. (3) warranty: 24 months from the date of commissioning. (4) proper name plate indicating capacity, serial number, mfg date, max working pressure, test pressure, make etc. shall be provided on the tank. (5)inspection agency: tpi agency at firms works before dispatch. [ warranty period: 24 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45674802

29 Jun, 2026 NA

Mehsana - Gujarat

Tender For tender for scrap selling-old newspaper, oil tin etc. , hiring of tractor, jcb, for m&r work , septic tank and drainage line cleaning , tuck shop on contract , labour for white wash & colouring , mandap on rent , students hair cutting , student uniform press & washing

Central Government/Public Sector

CTN :45637871

24 Jun, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot ferrous scrap - scrap miscellaneous m.s. cutting such as angle, channel, round bar, g.i. ducting with or without foam rubber, m.s. pipe with or without cement, gi insulator,hook ,mast multiple cantilever channel, cantilever assembly spsgi bolt,double eye distance clamp, guard box with or without wooden, air filter, plate (all type) frame, rod, ms sheet, plate, flate, tmt bar, c and w cutting, nut bolt, square bar, pin, g i rod, g i plate, box, gril, extended metal sheet, coupling, chain hook, shutter, bond strip, blower, battery box, electric box, shock absorber, all type of pipe, gi pipe, ms pipe, chain, chain pully, tikam, powrah, structure, platform structure, small rod pieces, strip, foundation, tank, sleeve, bearing plate, tensioning device, window, pannel, foot step, sheet, gear, mesh, screw coupling, stand, roller, cylinder, small auto parts, slack adjuster, hanger, link, hook, stay rod, brake shoes, coupler, adopter, cock, pick axe, beater, showel, clamp, stand, rail kaichi, rack ballast, electric pole wire support angle, fire extinguisher, rail dolly, all type of lorries with or w/o. wheels, rubber wheel tyre, tongue and other pwi tools, jali, angle frame, belly gater, coach washing machine, machine parts, rope wire,coach door,counter weight,gi insulator with porcelin,electric pole,elavator accessorires,wheel barrow,helmet,pan gamalah, various type of bucket, ms box, furnace, gear, various type lc & wl board of, silent block, wire basket, bucket g.i., track lifting jack, cable tray,m s chain,weigh scale, coach cutup material, empty barrels, empty drum,db grid mesh and hbac air filter etc. with or witout other ferrous and minor nf attachment old used and u.s.

CTN :45619229

18 Jul, 2026 NA

Thumba - Kerala

Tender For tender for design and tender for air receiver tank

corporations/Associations/Others

CTN :45612044

26 Jun, 2026 NA

Silvassa - Dadra And Nagar Haveli

Tender For auction sale of electrical cable scrap,used air receiver tank,dg kirloskar make 62 kva,used air compressor jl,transformer with oltc class ii,transformer

CTN :45499153

22 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of pressure guages calibrati , vaccum guages calibration , compound guages calibrati , temp guage calibrationtes , prv calibrationtesting , level transmitter testing , pressure transmitter test , differential press transm , pressure switches testing , diff press switches testi , bullet srv testingcalibra , torque wrench calibration , hot crane testing , lpg knock out drum testin , high mast winchrope testi , life line testing , testing of ht 33 kv glove , testing of lt 440 v glove , testing of multimeter and , testing of lux meter , testing of digital insula , testing of earth resistan , calibration of energy met , air receiver tanks testin , testing of elcometer , supply andinstallation o , supply andinstallation of , supply and of 2inch ss va

CTN :45449524

15 Jul, 2026 NA

Tarapur - Maharashtra

Tender For supply of compressed air receiver tanks

CTN :45429316

25 Jun, 2026 10.00 Lacs

Multi City - Telangana

Tender For outsourcing non destructive test (ndt) and hydraulic test on air receiver tanks of various hemm, support equipment and stationary compressors working at ocp3, rg2 for a period of one year

Receiver Tank Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others