Latest recharge shaft Tenders | Government recharge shaft Tenders

CTN :43525504

17 Jan, 2026 32.00 Lacs

Aklera - Rajasthan

Tender For anicut renovation, recharge shaft gabion, amrit sarovar at wc kharpa, mathoon and turkadiya under pmsky 2.0 (wdc-1) ps aklera district jhalawar (07 works)

CTN :43206566

12 Jan, 2026 NA

Ferozepur - Punjab

Tender For corrigendum : material and labour for construction of 3800 mtr x chain link fence in ferozepur - s&f structural steel post of angle iron 65x65x6mm, 4.50 mtr long, weight as per is 2062-1984 including fabrication of 0.60 mtr both side long top portion swan neck v type at 30 degree to vertical, including making six round holes of 15 mm dia on vertical posts and for fixing of nuts and bolts and three nos of 15 mm dia holes for fixing strut and five nos notches on the swan neck and welding of two nos of 16 mm ms rod each of 0.23 mtr length to bottom end of picket for anchorage including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint embedded portion of angle 0.45mtr. make : jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge, s&f structural steel post of angle iron 65x65x6mm, 3.30 mtr long, weight as per is 2065- 1984+b12, including fabrication for strut post bending at top portion, including making three nos holes of 15 mm dia on vertical posts for fixing of nuts and bolts and three nos of 15 mm dia including 0.23 mtr 16 mm dia ms rod two piece to be welded at bottom for anchoring purpose including one coat of red oxide primer and two coat of synthetic enamel paint for exposed surface of angle above gl complete and two coat of bituminous paint for stud 0.45mtr below gl for one side of the post complete all as specified and directed by engineer-in-charge. make : jindal/ sail/ tata/equivalent isi marked, s&f galvanised two or three strand steel barbed wire (line wire) of 2.24mm diameter of wire, barbs at 75mm spacing. the barbs are (point wire) 02mm thick wire shall be isi marked as per is:278 of 1978 (third revision) with amdt no 1 to 4. the points of barbs shall be sharp. the line and point wires shall be circular in section free from scales and point wires shall be circular in section free from scales and defects and shall be uniformity galvalium. the barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of is specification cited above read with is 4826/79 (first revision).make:sail/tata/ aplapollo/rinl/jsw complete all as specified and directed by engineer-in-charge, s&f galvanised steel chain link fence fabric of mesh size 125mm x 125mm (+/-) 4mm of 4.00mm nominal diameter. the size of chain link fence fabric shall be 2.7 mtr x 15 mtr mesh wire. galvalium chain link shall be manufactured as per is 4823 complete all as specified and directed by engineer-in-charge. make : tata/jsw/rinl/ jindal/sail., s&f ms plat of 40x3 mm, 2.70 mtr long with 6 holes of 15 mm dia, including one coat of red oxide primer and two coats of synthetic enamel paint. 3.02 kg per flat. make of steel: jindal/ sail/ tata/equivalent isi marked complete all as specified and directed by engineer-in-charge., s&f mild steel bolts with hexagonal head at one end and screwed the other end fitted with one nut and two washers. the bolts shall be 12mm dia and 50mm long. strong long lasting, resistant to corrosion and 100% recyclable complete all as specified and directed by engineer-in-charge. make: jindal / sail/ tata/ apl apollo/ jsw/ rinl, s&f ms round bars 10mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer. make: jindal/ sail/ tata/ apl appolo/ jsw/ rinl complete all as specified and directed by engineer-in-charge., s&f ms round bars 16mm dia with hook on both sides made to shape including two coats of synthetic enamel paint over a coat of red oxide primer make: jindal/sail/tata/apl apollo/jsw/rinl complete all as specified and directed by engineer-in-charge., material and labour for excavating in soft and dense soil trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in dept

CTN :43501787

29 Jan, 2026 NA

Hyderabad-T - Telangana

Tender For supply of orthopedic tool set d d -autopsy saw , bone saw , brain matrices , ss trolley , artery forceps 6 inches curved , artery forceps 6 inches straight , mosquito forceps 4 inches curved , right angled forceps 6 inches curved , bp handle size 4 , bp handle size 3 , scissors dissecting metzenbaum 8inches , scissors vascular 7 inches , tissue forceps7 1 oblique 2inches , coagulation forceps , vascular forceps 7 3 oblique 4 inches , needle holder heavy 6.5 inches , needle holder - fine 7.5 inches , anderson adson retractor 8inches , langenbeck retractor 8inches 3 oblique 8 x 1 1 oblique 2 blade , towel clips , nerve hook , bull dog clamps , bowl smal , kidney tray , skin towels , small drape with window , suture needles round bodied , suture needles cutting , silk size 2 to 30cms long pack of 12 , gauze pieces , scissors dissecting metzenbaum heavy , curved clamp 8inches , aortic canula 20f , left ventricular vent 18f angled venous canula , derra partial occlusion clamp 7 , debakey angled clamp 60 degree 18mm jaw length , debakey angled clamp 90 degree , mason clamp 8inches , glover curved clamp right angle 8inches , satinsky vascular clamp 23cm , satinsky vascular clamp 20cm , satinsky vascular clamp 19cm , debakey chest retractor medium size , crile haemostat straight 14 cm , right angled clamps 17cm , demartel angled scissors , tubing clamp 15cm , tubing clamp 20cm , debakey thoracic tissue forceps 24 cm , debakey thoracic tissue forceps 20 cm , vascular forceps 24 cm , vascular forceps 20 cm , volk man retractor 4prongd 8inches , potts scissors 25 degree angle 7 1 oblique 2 inch , potts scissors 60 degree angle 7 1 oblique 2 inch , potts scissors 75 degree angle 7 1 oblique 2 inch , bethune rib shears double curve shafts 14 , periosteal elevator , suction tip , whole body drape with window , side sheet , tube occluding clamp serrated jaws with guard 7inches , venous canula 30 to 32f , bone chisel , surgical hammer high strength , bone cutter 8 inches //bid details 2 / 57

CTN :43509114

19 Jan, 2026 63.28 Lacs

Alwar - Rajasthan

Tender For construction of recharge shaft and anicut work in mjsa 2.2 p.s laxmangarh (package no. 03)

CTN :43509122

19 Jan, 2026 39.81 Lacs

Thanaghazi - Rajasthan

Tender For construction of recharge shaft and talai renovation work nirman in mjsa 2.0 phase ii in block thanagazi (package no. 01)

CTN :43509901

16 Jan, 2026 63.28 Lacs

Alwar - Rajasthan

Tender For construction of recharge shaft and anicut work in mjsa 2.2 p.s laxmangarh (package no. 03)

CTN :43509902

16 Jan, 2026 39.81 Lacs

Alwar - Rajasthan

Tender For construction of recharge shaft and talai renovation work nirman in mjsa 2.0 phase ii in block thanagazi (package no. 01)

Central Government/Public Sector

CTN :43512516

02 Feb, 2026 76.11 Lacs

Delhi - Delhi

Tender For repairing of 16 nos. shafts along with replacement of all old pipelines in shafts at electronics niketan

Central Government/Public Sector

CTN :43514166

12 Jan, 2026 NA

Nagpur - Maharashtra

Tender For replacement of both end frames including pivot shafts bearing housingsof wt-6

State Government

CTN :43491480

20 Jan, 2026 12.27 Lacs

Bellary - Karnataka

Tender For procurement of spares for aph soot blowers - bm_sleeve assy lrnr u3, bm_lance extn.assy.(l-5850 mm), bm_emergency hand crank, bm_connecting tube for lrnr, bm_tube d 108x8x7000, bm_tube d 159x22.2x500, bm_tube d 108x8x100, bm_spocket lock, bm_chain spocket shafts(de & nde), bm_travelling carriage assembly, bm_feed tube, bm_gland packing (carriage assy), bm_puppet valve packing set, bm_element gasket, bm_roller (lance lower), bm_roller (lance upper), bm_jack shaft bearing with sprocket, bm_gasket lance tube to carriage, bm_gasket feed tube to puppet, bm_rear end plate assembly, bm_bearing and yoke plate assembly

Recharge Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government