Latest recharge structure Tenders | Government recharge structure Tenders

Central Government And Public Sector

CTN :40534153

09 Jun, 2025 16.93 Lacs

Agra - Uttar Pradesh

Tender For repairs to jere hamam and langer khana area at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (packing in bags 25kg & 50 kgs) (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (bansi paharpur qurry).(rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), water proofing compound (rate including g.s.t.)., clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), taking out of angle iron frame 40x40x6 mm having 12mm square bar with spikes 1.25mtr high and hold fast by manual labour and stacking within 50 meters lead etc. complete in all respect. (rate including g.s.t.), taking out stone masonry manually bit by bit without disturbing to the adjoining structure including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of engineer-in-charge : in cement mortar. (rate including g.s.t.), random rubble stone masonry with hard stone in super structure in cement mortar 1:6 (1cement 6 c. sand) including pointing, t&p, scaffolding etc. complete. (rate including g.s.t.), cr stone masonry with 70% available stone and 30% new stone in super structure and plinth with cement mortar 1:6 (1 cement: 6 coarse sand), pointing, scaffolding etc. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement: 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), repairing of old existing grills in boundary wall including supply of required materials, welding, fabricating & labour etc. complete. (rate including g.s.t.), providing & fixing m.s. gates of required pattern with angle iron frames (50x50x6)mm size graded with 10 cm c/c sq. bars 16mm size pointed at the top extra with same curved bar and each frame having gusset plate 6mm thick at corners & center and provision for hinges and locking arrangement with supply of r.s. joist (200x100x5.7)mm section for hanging m.s. gate including nut bolts, cutting fabricating welding etc. complete. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6) mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), coursed rubble masonry with hard stone (first or second sort) in facing up to 22.50 cm thick random rubble masonry in back side in superstructure above p

State Government

CTN :39879071

09 Jun, 2025 8.65 Lacs

Kheda - Gujarat

Tender For corrigendum : work contract for bah and seal through puncture repairing, refractory applying, boiler outside/inside scaffolding, valve overhauling/servicing and other miscellaneous works on as and when required basis of unit-4, 5, 6 and 7 at wanakbori tps.

corporations/Associations/Others

CTN :40188407

06 Jun, 2025 21.00 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : providing of custom bid for services - annual contract for arrangement of scaffolding materials, scaffolding erection and dismantling

CTN :40534248

18 Jun, 2025 3.97 Crore

Kolkata - West Bengal

Tender For supply and application of insulation materials on pipe, equipment for part a and part b as per standard specification by providing all required materials in connection with the composite work for setting upof hpg-2, butene-1 and psa units atlepetkata - legends / notes for insulation workstypes of insulation : ih = insulation for heat conservation it = insulation for steam traced lines is = insulation for personal safety ic = cold insulation for anti-condensation ie = insulation for electrically traced lines ij = insulation for jacketed lines ik = insulation for dual insulated lines basic line surface materials : cs = carbon steel (including lt carbon steel), as = alloy steel, ss = stainless steelnotes :1. for insulation type it,tracer size and tracer numbers shall be as per specification.2. insulation thickness for ic where insulation material is poly urethane foam (puf) / poly isocyanurate (pic) + cellular glass includes outer layer of 50mm of cellular glass and inner layer of balance thickness of puf/pic.3. insulation for ie consists of inner layer of rockwool and outer layer of puf / pic. the thicknesses have been specified as thk(i) and thk(o) for inner and outer layers respectively., part a, hot insulation (units)providing thermal insulation including supply of all insulating and ancillary materials, vapour barrier, weather protective coverings, consumables and other necessary materials , testing of materials as required, including transportation of materials to work site, duly inspected by 3rd party inspector(llyods/bv/dnv or any other client approved party) at manufacturers shop & sample check/inspection at site by eil construction inspector, applying insulation on surfaces as specified including all preparatory work there on, binding, tying, lacing, stitching and/or otherwise securing , finishing with sheet cladding as per spec. , providing bolts, rivets, and self tapping screws wherever specified , providing inspection windows, end seals for flanges etc., colour coding and identification. providing steel scaffolding, all tools , tackles , equipments etc. , labour, supervision and completing the work in all respect, at all heights as per drawings , specifications and instructions of engineer-in-charge. (refer legend for applicable eil specification), insulation type : ih ; surface material : cs & as ; operating temp. range : upto 125 (deg c) ; insulation material : rockwool, pipes, nb 00.75 inches; thickness 25 mm, nb 01.00 inches; thickness 25 mm, nb 01.50 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, nb 03.00 inches; thickness 25 mm, nb 04.00 inches; thickness 25 mm, nb 06.00 inches; thickness 25 mm, blind flange assemblies, nb 00.75 inches; thickness 25 mm, nb 02.00 inches; thickness 25 mm, valve assemblies, nb 00.75 inches; thickness 25 mm, insulation type : ih ; surface material : cs & as ; operating temp. range : 126 (deg c) to 350 (deg c) ; insulation material : rockwool, pipes, nb 00.50 inches; thickness 25 mm, nb 00.50 inches; thickness 40 mm, nb 00.75 inches; thickness 25 mm, nb 00.75 inches; thickness 40 mm, nb 00.75 inches; thickness 50 mm, nb 01.00 inches; thickness 25 mm, nb 01.00 inches; thickness 40 mm, nb 01.00 inches; thickness 50 mm, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 40 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 02.00 inches; thickness 65 mm, nb 03.00 inches; thickness 25 mm, nb 03.00 inches; thickness 40 mm, nb 03.00 inches; thickness 50 mm, nb 03.00 inches; thickness 65 mm, nb 04.00 inches; thickness 25 mm, nb 04.00 inches; thickness 40 mm, nb 04.00 inches; thickness 65 mm, nb 06.00 inches; thickness 40 mm, nb 06.00 inches; thickness 65 mm, flange assemblies, nb 01.50 inches; thickness 25 mm, nb 01.50 inches; thickness 50 mm, nb 02.00 inches; thickness 25 mm, nb 02.00 inches; thickness 40 mm, nb 02.00 inches; thickness 50 mm, nb 03.00 inches; thickn

CTN :40418397

31 May, 2025 6.01 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of matrials for construcation of compound west at lingapur village guledagudda grama panchayat kelavadi of bagalkote district - add sundries charges at 1 % on material (lingapur west), over head & other miscellaneous charges (lingapur west), broken stone aggregate 40 mm size (lingapur west), broken stone aggregate 20 mm size (lingapur west), broken stone aggregate 12 mm to 10 mm size (lingapur west), coarse sand (zone iii) (lingapur west), portland cement (lingapur west), mixer (concrete) - 1 cum capacity (lingapur west), add watering charges at 1 % on material (lingapur west), boulders (lingapur west), size stone 20 x 20 x 25 cms (lingapur west), bond stone 20 x 20 x 45 cm (lingapur west), mixer (concrete small used in culvert)(lingapur west), mason class ii (with tools)(lingapur west), add providing and removing scaffolding at 3% on labour (lingapur west), plastic emulsion paint (lingapur west), add brush, putty, sand paper, roller at 5% on cost of paint (lingapur west), painter class i (lingapur west), add handling , loading and unloading at 1% on material (lingapur west)

CTN :40418438

02 Jun, 2025 5.51 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of matrials to constraction compound at katageri - mr9759-add providing and removing scaffolding at3% on labour (katageri compound), mr9724-mason class ii (with tools) (katageri compound), mr9677-mixer (concrete small used in culvert) (katageri compound), mr9426-boulders (katageri compound), mr9424-bond stone 20 x 20 x 45 cm (katageri compound), mr9535-size stone 20 x 20 x 25 cms (katageri compound), mr9773-add watering charges at 1 % on material (katageri compound), mr9678-mixer (concrete) - 1 cum capacity (katageri compound), katageri compound)0367-portland cement, katageri compound) 0982-coarse sand (zone iii), mr9431-broken stone aggregate 12 mm to 10 mmsize (katageri compound), mr9432-broken stone aggregate 20 mm size (katageri compound), mr9433-broken stone aggregate 40 mm size (katageri compound), gpkatageri-mr9757-transportation/loading and unloading ofmaterial/lifting of material/wastage/unforeseen charges/miscellaneouswhich are necessary during execution.(katageri compound), mr9762-add sundries charges at 1 % on material (katageri compound)

CTN :40418443

02 Jun, 2025 11.82 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of matrials to constraction katageri nrlm shed - broken stone aggregate 40 mm size (kat01), broken stone aggregate 20 mm size (kat01), broken stone aggregate 12 mm to 10 mm size(kat01), coarse sand (zone iii) (kat01), portland cement (kat01), mixer (concrete) - 1 cum capacity (kat01), add watering charges at 1 percentage on material (kat01), add sundries charges at 1 percentage on material (kat01), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution. (kat01), granite/trap broken metal 100 mm and down size (kat01), plasticizer / super plasticizer (kat01), hom of vibrator 0.71 days (kat01), tmt bars fe 500 (kat01), binding wire (kat01), size stone 20 x 20 x 25 cms (kat01), bond stone 20 x 20 x 45 cm (kat01), boulders (kat01), mixer (concrete small used in culvert) (kat01), mason class i (with tools) (kat01), mason class ii (with tools) (kat01), stone chistler class ii (kat01), add sundries charges at 1 percentage on labour (kat01), add watering charges at 1 percentage on labour (kat01), silver oak or equivalent planks 38 mm thick (kat01), casurina poles 100 - 150 mm (kat01), add handling , loading and unloading at 2 percentage on material (kat01), add sundries charges at 2 percentage on material (kat01), casurina poles 75 - 100 mm dia (kat01), jungle wood runners and planks (kat01), solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm (kat01), add handling , loading and unloading at 1 percentage on material (kat01), solid concrete blocks (40x10x20 cms)-4.00 n/sqmm (kat01), add providing and removing scaffolding at 3 percentage on labour (kat01), vitrified tiles 600x600 mm (kat01), mathi/nandi wood planks for panels 25 mm thick (kat01), add cutting and other wastage 5 percentage (kat01), hom of machinaries for planing (kat01), mathi/nandi wood scantling (kat01), unit cost as per the specification (kat01), m.s rods (kat01), ms flat (kat01), fitter class i (kat01), welder grade i (kat01), add hom of welding and grinding machine at 4 percentage on material (kat01), ready mix primer paint (ready mix red lead paint) (kat01), add wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint (kat01), painter class i (kat01), enamel metal paint (kat01), add brush at 1 percentage on cost of paint (kat01), ceramic tiles 30 x 30 cms (kat01), white cement (kat01), plastic emulsion paint (kat01), add brush, putty, sand paper, roller at 5 percentage on cost of paint (kat01), water proofing cement paint (kat01), add brush, putty, sand paper at 2percentage on cost of paint (kat01), liquid wood filler (kat01), add brush, putty, sand paper at 5 percentage on cost of paint (kat01), enamel paint (kat01), polyenthylene water storage tank of specified capacity l (kat01), labour charges for lifting and placing in position and making connection at 7 percentage on material (kat01), handling loading and unloading 3 percentage on material (kat01), indian type water closet of size 580 mm of specified make with footrests (kat01), a 100mm s or p trap (kat01), add white lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on material (kat01), add cement sand and grit 1 percentage on material (kat01), licenced plumber with tools (kat01), add 5 percentage for fittings and wastage charges (kat01), polythylene pipes high density 25mm external dia (kat01), cost of 6.5mm m.s. coil (kat01), fabrication charges. (kat01), labour charges for handing errection of rcc rings etc. at 5 percentage (kat01), transportation charges of materials beyond 5 km at 10 percentage (kat01), rcc cap 1000 mm dia, 100 mm thick (kat01), pvc pipe of 10kg/cum,90 mm (kat01)

CTN :40431171

05 Jun, 2025 6.96 Lacs

Multi City - Karnataka

Tender For corrigendum : tender notification for construction of compound in m.c.thalalu highschool, m c thalalu gp nrega convergence - mct broken stone aggregate 40 mm size, mct broken stone aggregate 20 mm size, mct broken stone aggregate 12 mm to 10 mm size, mct coarse sand (zone iii), mct portland cement, mct mixer (concrete) - 1 cum capacity, mct add watering charges at 1 percent on material, mct add sundries charges at 1 percent on material, mct over head & other miscellaneous charges, mct size stone 20 x 20 x 25 cms, mct bond stone 20 x 20 x 45 cm, mct boulders, mct mixer (concrete small used in culvert), mct mason class i (with tools), mct mason class ii (with tools), mct stone chistler class ii, mct solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, mct casurina poles 100 - 150 mm, mct add handling , loading and unloading at 1percent on material, mct add sundries charges at 2 percent on material, mct silver oak or equivalent planks 38 mm thick, mct jungle wood runners and planks, mct casurina poles 75 - 100 mm dia, mct add handling , loading and unloading at 2percent on material, mct tmt bars fe 500, mct binding wire, mct plasticizer / super plasticizer, mct hom of vibrator 0.71 days, mct water proofing cement paint, mct add brush, putty, sand paper at 2percent on cost of paint, mct painter class i, mct add providing and removing scaffolding at 3percent on labour

CTN :40507202

09 Jun, 2025 4.96 Lacs

Mumbai - Maharashtra

Tender For providing of professional painting service - providing and applying acrylic smooth exterior emulsion paint; as per the attached atc documents; as per the attached atc documents,professional painting service - providing and applying synthetic enamel paint (sep); as per the attached atc documents; as per the attached atc documents,professional painting service - providing and applying oil bound washable distemper(obd); as per the attached atc documents; as per the attached atc documents,professional painting service - providing and applying plaster of paris putty of 2-6 mm thickness over plastered surface to prepare the surface even and smooth complete including scaffolding as and where required; as per the attached atc documents; a..

CTN :40363171

31 May, 2025 NA

Solapur - Maharashtra

Tender For corrigendum : hydrotesting of msv - degassing and isolation of bullets , lighting arrangement , metallic internal scaffolding , internal cleaning and visual inspection , ultrasonic thickness measurement , ultrasonic flaw detection measurement , wet fluorescent magnetic particle testing , dye penetration test , hardness testing , hydrotest of msvs , certificate by peso , checking of differential and uniform settlement of vessel , wet calibration of msv , supply of studs, gaskets and nuts,etc , boxing of vessel , painting of exposed area

Recharge Structure Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

State Government

corporations/Associations/Others