Latest reciprocating feeder Tenders | Government reciprocating feeder Tenders

Central Government / Public Sector

CTN :40175562

21 May, 2025 17.82 Lacs

Jabalpur - Madhya Pradesh

Tender For supply of switch mounting kit gen, item code-31110152,suitable with bar feeder model-sir52f,type-33.s/n-21227ma04. make:iemca , p-d22 button 3sb3500-0aa51 b,item code-31120305, suitable with bar feeder model-sir52f,type-33.s/n-21227ma04. make:iemca. , white button d-22 3sb3500-0, item code-31120306, suitable with bar feeder model-sir52f,type-33.s/n-21227ma04. make:iemca. , limit switch bes iku 010.23-g-s4,item code-31214538, suitable with bar feeder model-sir52f,type-33.s/n-21227ma04 make:iemca. , micro command az 15/16-b2 3sx3, item code-31219001,suitable with bar feeder model-sir52f,type-33 s/n - 21227ma04 make:iemca. , contactor 3rt1025-1ag20 110v, item code-31310253,suitable with bar feeder model-sir52f,type-33.s/n-21227ma04 make:iecma , relay 48.52.7.024.0050 spa 24v,item code-31340316, suitable with bar feeder model-sir52f.type-33.s/n-21227ma04 make:iemca. , relay 55.34.9.024.0094-24vdc-f,item code-31340411,suitable with bar feeder model-sir52f,type-33.s/n-21227ma04 make:iemca. , varist group 3rt1926-1bb00 (2), item code-32010023, suitable with bar feeder model-sir52f,type-33.s/n-21227ma04 make:iemca. , cpu 313c 6es7313-5bg04-0abo si with software, parameters & programing loaded, item code-32321053, suitable with bar feeder model-sir52f,type-33.s/n-21227ma04 make:iecma. , interface cabur cr4-2sc with software parameters & programi ng loaded item code-34316036 suitable with bar feeder model -sir52f,type-33 s/n-21227ma04. , connector 90 deg.1668292 sac-4p-3,item code-34320013, suitable with bar feeder model-sir52f,type-33.s/n-21227ma04 make:iemca. , connector lum mpm 532 anti oil, item code-34320016, suitable with bar feeder model-sir52f.type-33 make:iemca. , s/n-21227ma04. , valve group 6x5/2-2x5/3cc.item code-41150141, suitable with bar feeder model-sir52f,type-33 s/n-21227ma04. make:iemca. , limit switch mkt3000-bpkg/6m/zh,item code-31210051,suitable with bar feeder model-sir52f,type-33.s/n-21227ma04. make:iemca , limit switch mkt3000-apkg/zh mk5,item code-31210052, suitable with bar feeder model-sir52f,type-33 s/n-21227ma04. , make:iemca. , limit switch mkc3028-bpkg/g/zh m,item code -31210053, suitable with bar feeder model-sir52f,type-33 s/n-21227ma04. make:iemca. , micro az1602zvrk-m16 2254 3s,item code-31219103, suitable with bar feeder model-sir52f,type-33 s/n-21227ma04 make:iemca, fitted in cnc machine ofk no.10672 of a-3 section. , safety device 3tk28, item code-080899236,dsuitble with bar feeder model sir52f, type-33.s/n-21227ma04 make:iecma.fitted in cnc machines ofk no-10672 of a-3 section.

Central Government/Public Sector

CTN :40159300

13 May, 2025 NA

Bardhaman - West Bengal

Tender For supply of 4203078478 roll feeder for sinter machine

CTN :40124683

16 May, 2025 4.80 Lacs

Peddapalli - Telangana

Tender For procurement of roller shaft assembly for 400 tph reciprocating feeder breaker working at rgocm-1 chp

CTN :40136107

16 May, 2025 NA

Nagpur - Maharashtra

Tender For supply of rechargeable battery with automatic charger for portable 583 5837 lifter 12 volt 100 amp, with 18 mo , precision clasp locknut pmi ysk m18x1.5mm, material scm440, , iso-4h precision, runout max 0.005mm, , high speed rotational union for supply of high pressure immulsion coolant in mikron cnc dublin 1109- , pu open timing belt t5 x 20 mm. for bar feeder of tornos cnc machine at fs. acceptable make- pix, fe , air cooled oil cooler unit, hpp make model no hpp-l-608 or equivalent make with fitment and performa , braided flexible rubber hose, size-1" , for oil, iso 1436 /en 853, sae 100 r1at-24, max wp 50 bar, ac , braided flexible rubber hose, size-1-1/2" , for oil, iso 1436 /en 853, sae 100 r1at24, max wp 50 bar, , oil tank level gauge 3" stauff model no. sna- 076-b-s-0-12. or equivalent with fitment and performanc

Co-operative

CTN :40120374

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c s item on conversion supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg.supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b supply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate as per drg., c.s.trash beam as per is-1030/is 2708 as per drg.supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per deg no mh-17-c/04 side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-17-b top roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder as per drg.blr-73/1 pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, c.s.sprocket for bagasse elevator (pilot bore) as per drg.mh-75 pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm , boss- 270x130 mm, cs sprocket (pilot bore ) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm,od 258.8mm, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for enter carrier teeth 12, as per drg. mh-72/sample, s.s. wear plate is 304 quality (i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg., c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg., pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg., clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-212 mm, pcd-198 mm, pitch- 18.84 mm, module-6 as per drg. no., pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, nos of teeth 12, as per drg. blr 32/93, chain sprocket for inter carrier clucth shaft, od 280, pcd 270, bore 108, root dia 260, nos of teeth 45, nos of hole 4, as per drg. 001, pinion for transmission gear kcp mill, material en-24(as per drawing no. mh-95/2024-25), c.s. helical teeth pinion, teeth-20, od-60, bore-26, pitch-10(as per drawing no. bh-rg-05/2024-25), c.s. helical teeth pinion, teeth-17, od-62, bore-28, pitch-13(as per drawing no. bh-rg-04/2024-25), chief engineer

Co-operative

CTN :40120379

12 May, 2025 NA

Udhamsign Nagar - Uttarakhand

Tender For c i item on conversion supply basis - c.i.pipe with standard thickness & flange as per i.s.i. specification machined from dia 4" to 12"(i) new material supply basis, (ii) on conversion basis, c.i. bend, duck foot bend, cross,tee and other such part all size as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.drum, rod,bush, bari,idler pully, break drum for cane unloader etc as per drg.(i) new material supply basis, (ii) on conversion basis, c.i.coupling from 4"dia to 10"dia plane/flange type(i) new material supply basis, (ii) on conversion basis, c.i. firing frame,door side chamber, bagasse rotary chuts, rotary feeder drum , clit, hanger, beam, gutka, furnace nozzle, clam etc. and other such parts for lipi/taxmaco boiler as per different drg.high chrome grade 25 , casting & machined temp. capacity 15000 c(i) new material supply basis, (ii) on conversion basis, c.i. clamp/ hanger clit small size for lippi boiler no. 3 as per drg. blr-79 high chrome grade 25 , casting & machined temp. capacity 15000 c, c.i scapper mixed with pig iron and having standard hardness dully machined as per drg.no.mh-66 ( r)(i) new material supply basis, (ii) on conversion basis, (iii) grooving of c.i.scrapper as per drg., centrifused casted c.i.coupling for fmg gear of kcp mill od 1000 mm.pcd 815(18 holes)9+9,with machining complete as per drg.no.mh-93, c.i.motor cover for different type motor, mill setting bolt & nut for kcp mill drg.no.mh-106, mill setting bolt & nut for taxmaco mill drg.no.mh-38, c.i.worm and worm wheel for crystilizer as per drg.bh-39 ( r ) machined, c.i.worm and worm wheel for vertical crystilizer no. 2 complete set as per drg. machined, eccentric shaft and eccentric for hopper as per drg.no.bh-60, m.s.shell for under feed roller as per drg.mh-95.length 1525 mm.od 750mm,thickness 18mm, c.i. muff coupling for cane unloader as per drg.no cu-25, c.i.gear for magma mixture as per drg.no bh-137.od 450mm,no.of teeth-51.bore 70mm, width 63mm, c.i.brake drum for s.d.centrifugal machine taxmaco make duly machined(i) as per drg.no. bh 81/1, (ii) as per drg.no bh-81/2, c.i.v-belt pully of cont.centrifugal machine duly machined, c.i.scale seat for juice weighing scale duly machined and drilled as per drg.no.mh-195, id fan pully (as per drawing no. bl-r-128/2024-25), id fan motor pully (as per drawing no. bl-r-129/2024-25), chief engineer

corporations/Associations/Others

CTN :40078927

19 May, 2025 6.56 Lacs

Puruliya - West Bengal

Tender For custom bid for services - reconditioning of coal feeder outlet reducer portion (chute) for both units of rtps-1. transportation of damaged/worn-out feeder outlet reducer portion (chute) from rtps, dvc site to vendor workshop and repaired chute from vendor workshop to rtps, dvc site is in the scope of vendor. 2. loading/unloading of materials are in the scope of vendor except at rtps, dvc site. 3. a joint inspection will be done at rtps site for noting & area marking on chute (area to be repaired) before receiving of material. 4. measure the worn-out portion & cut it completely with the help of cutting tools or plasma cutter. 5. grinding and edge preparation is to be done as per requirement on plate before welding. 6. fit the new plate as per requirement and weld it in chute with proper welding electrode308l and grind finish is required after welding. 7. new plate & its bending in required shape is in the scope of vendor. 8. all consumable like welding electrode, cutting wheel, grinding wheel, etc. are in the scope of vendor. 9. plate material (plate thickness-12 mm, material- ss304, make will be only of three company sail, tata & jindal) is in the scope of vendor. 10. repairing/replacement of ms flange if required will be in vendor scope. 11. payment will be made on actual square meter repaired by vendor. 12. quantity of chute for repair is 12 nos it may vary (may be increase or decrease). 13. delivery period is 180 days after placement of wo. 14. part payment against part supply is acceptable. 15. the reconditioned chute has to be guaranteed for a period of 12 months from the date of supply & 06 months from date of commissioning whichever is earlier against bad workmanship. guarantee/warrantee certificate to be furnished at the time of completion of work. 16. party has to submit the 1:1 fitment cum interchangeability certificate of material. 17. the party has to submit the indemnity bond after placement of work order. 18. pre-dispatch inspection shall be carried out by m/s dvc at vendor s works and the vendor has to intimate 15 days in advance regarding readiness of the material. 19. dimensional verification & positive metal identification (pmi) test shall be carried out during pdi for ss 304 plates welded to chute and the vendor has to arrange machine with valid calibration certificate at their own cost. 20. all the old & damaged scrap cut during the course of work shall be returned to m/s dvc during delivery of chute at rtps.

Central Government And Public Sector

CTN :40025831

06 May, 2025 NA

Kalpakkam - Tamil Nadu

Tender For supply of micom p142 feeder management relay , micom p241 rotating machine protection relay , micom p343 generator protection relay

CTN :40022675

01 May, 2025 NA

Baghpat - Uttar Pradesh

Tender For supply of machinery parts as per drawing year 2025-26 - m.s. roller for mud conveyor as per drg. 1268/r-2 dated 22.06.09) od 100mmxlength 225mm, od 90mm.xlength 200mm, od75mm.x length 630mm, od 100mm x length 740mm, c.s. trash beam bottom bracket as per drawing no. b/2008/c-1357 dated 09.07.08 conversion basis, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, g.r. pressure feeder nose plates scrappers to be mfg. as per drawing no. b/94/c-1087/r-2 dated 05.06.09, on conversion basis., cast steel swing arm left hand/right hand (gear side) all over machined as per drawing no. b/2002/c-1265/r-2 dated: 22.4.2009, en-19 forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 33 teeth., en-19, forged steel spur gear pinion having machine cut teeth for cane unloader, as per drawing no. b/2001/c-1256/r-1, 68 teeth., c.s.bearing housing with fitted 02 nos. locking camp. plate for roller shaft for mill (all over machined) to be manufactured as per drawing no. b/93/c-1011/r-2 dated: 13-06-2009 material cast steel is: 1030 grade 27-54, dismentling of chopper tubs and replacement of worn out hubs by new hubs, fitting and balancing as per drg. no. b/05/c-1129/r-1, replacement of bronze linner of mill hydralic cap, machining, buffering, fitting & testing., c.s.sprocket on conversion basis as per drg. no. b/94/c-1056, maching of transmission gear shaft from old shaft as per drg. no. b/2001/c-1258/r-1(material-cl-4, is-2004), c.s double sprocket 76 teeth for welding & machining with teeth cutting, c.s double sprocket 25 teeth for welding & machining with teeth cutting, pinion 38 teeth of new main bagasse carrier chain, pinion 25 teeth of new return bagasse carrier chain, pinion 52 teeth of old main bagasse carrier chain, pinion 25 teeth of old main bagasse carrier chain, worm & worm wheel for crystlizer as per drg. no. b/73/c-310, worm as per drg. no. b/75/c310, en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dated: 12.06.2010. (2 section per pin), c.s. gr 26/52 is-1030 machined knife holder hub for cane leveler as per drg. no. b/2007/c-1337/r-1 dt. 17.07.2022 (without key), repair of links hole of block type chain, c.i. idler for cane carrier as per drg. b/2007/c-1340 on conversion basis with machining, repair of pinion teeth-38 of bagasse elevator, c.s. sprocket wheel 14 teeth for cane carrier head shaft maics-26/52, is 1030 as drg. no. b/94/c-1041/r2 dt. 20.06.2007, en-24 helical pinion with shaft no. of teeth-19, od-90mm, root dia-72mm,teeth face wide-180mm, total pinion shaft length-490mm as per sample, leaf spring supporting frame for grader as per drg. no. b/2022/c-1530. type-1 (spring steel flat size 75 x 8mm), en-9 steel shaft for mill house crane as per drg. no. b/2020/c-1571, mark-1, repair of chain block 02 ton cap., repair of chain block 01 ton cap., repair of chain block 05 ton cap., repair of chain block 03 ton cap., en-9 forged steel pin for mill a frame as per drg. no. b/2010/c-1377 dt. 12.06.2010 (2 section per pin), metalon/teflon ptef bush for rotary screen as per drg. no. b/2024/c-1562 dt. 04.07.2024, brass seat for juice heater double beat valve size 8 as per drg. no. b/2024/c-1564 dt. 14.07.2024

Central Government/Public Sector

CTN :40058541

02 May, 2025 NA

Multi City - Multi State

Tender For supply of multifunction machine - specification : "catridge technology: separate drum and toner(dual compon ent),print technology: laser, type of printing: mono,platen/flatbed size: a4, paper size (original/image): a4/a4,prin t speed per minute as per iso/iec 24734 in a4 size: 34 in mono,duplexing feature: yes, scanning feature:yes,origi nal document feeder type: adf, ram size:256 mb,network interface: ethernet 10/100,wi-fi type:wi-fi 802.11b/g/n & wi fi direct,bypass facility: yes,duty cycle: 35,000 prints per month,dimensions: 410 x 399 x 272 (mm x mm x mm),oem warranty: 5 years" [ warranty period: 60 months after the date of delivery ]

Reciprocating Feeder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Co-operative

Co-operative

corporations/Associations/Others

Central Government And Public Sector

Central Government/Public Sector