Latest recreation service Tenders | Government recreation service Tenders

State Government

CTN :42528119

13 Nov, 2025 15.50 Lacs

Bellary - Karnataka

Tender For “upgradation of electronic water level indicator (ewli) system at btps unit-1” per the technical specifications given in the job order.shifting of material to work place.inspection of material in presence of indenter & stores.power off the existing system, isolation & removing of existing bhel vision -20 m pressure vessel/cable/ ascertor/electronics cabinet/rdu equipments and shifting to designate area.replacing the new ewli system pressure vessel/cable/ ascertor/electronics cabinet/rdu in the existing location, ensuring of all connections and power on the system.checking/testing of healthiness (alarm, trip, analog output contacts and display) of the system and commissioning.any additional items, tools, accessories required for carry out the above work shall be contractor/supplier scope.satisfactory operational performance has to be ensured.shifting of released material to stores.training of plant personnel for operation and maintenance of new ewli system.it is the complete responsibility of the firm to execute the job & to bring back the system in to operation without time delay

Central Government/Public Sector

CTN :42442614

15 Nov, 2025 NA

Bangalore - Karnataka

Tender For supply of air condition system for manufaturing inspection c c - variable refrigerant flow consisting of one outdoor and multiple indoor units refer details as per specification , vrf 4 way cassette ac capicity 4 tr refer details as per specification , installation of all the above odu and idu cassette vrf unit with hanging rods refer details as per specification , copper pipe of minimum thickness 1 point 6 mm or higher from 1st idu to 6th idu as per site requiremen refer details as per specification , cpvc drain pipes hot and cold with fittings main cpvc drain pipe size shall be 4 inch or higher refer details as per specification , cable tray with cap for idu copper pipings from unit to unit refer details as per specification , cable tray with cap for main line from odu to 1st idu unit refer details as per specification , communication cable 2 point 5 sqmm 2 core refer details as per specification , power cable 3 core 4 sq mm with 32 amps with 2 poles mcb and socket refer details as per specification , 30 sq mm 4 core cable with 100 a and 4 poles mcb with proper earthing from odu to idu mcb refer details as per specification , conduit for cable 1 inches with fittings refer details as per specification , n2 pressure testing for all circuits refer details as per specification , welding work refer details as per specification , odu stand refer details as per specification

CTN :42401962

01 Nov, 2025 NA

Bangalore - Karnataka

Tender For repair of veh - starting relay 4 pin , flywheel sensor , system protection valve overhauling , gear box top bush kit lathe work , release bearing , benjo union bolt , radiator repair , diesel pipe , alternator main wire 8mm , ignition switch , pump solonoid switch , fuel feed pump assy overhauling , window regulator assy , door lock with key , clutch cylinder kit , door catch , engine diagnostic through laptop , injector servicing and pressure testing , electronic injector replacement edc pump assembly overhauling , fitment of edc pump in the vehicle and resetting , electrician labour charges for repairing all broken wires and replacement of clips , mechanical labour charges for removal of gear box assembly stripping rectification , fuel feed pump overhauling , nrd valve , banjo union bolt , brake shoe liner with reveitting , mechanical labour charges for removal of other unserviceable items fitment of new spare , alternator overhauling , window regulator assembly , combination switch , fly wheel sensor , clutch booster union , clutch yoke bolt , clutch cylinder assembly , right hand door catch , gear box mtg bolt , propeller shaft bolt , rear brake booster overhauling , self starter repair by replacing the armature brush holder bushes bendex drive with labour charges , electrician labour charges for repairing all broken wires and replacement of clips fuses and sleeves , pump solenoid switch , engine diagnostic through laptop cabin loom checking and rectified and canniblization of ecm , 12v relay , axle paste , wiper motor repair , front axle hub sleeve brazing , hub bedding breezing and boring , stub axle threading lathe work , bend drop arm welding and threading , stub axle sleeve fitting , knuckle bearing , knuckle oil seal , knuckle lock , door glass bottom plate , window glass beading , araldite , mechanical labour charges for removal of unserviceable items fitment of new spares , pressure plate , clutch plate , clutch booster assembly , flywheel facing lathe work , door lock with key , door lock open lever , steering high pressure pipe , door catch , radiator repair and overhauling , rear brake shoe liner with riveting , r14 relay valve assembly , mechanical labour charges for removal of gear box assembly stripping fitment of new spare parts , electrician labour charges for repairing all broken wires replacement of clips fuses sleeves

CTN :42476844

07 Nov, 2025 7.19 Lacs

Jind - Haryana

Tender For supply of pressure gauge calibration , pressure switch calibration , temperature gauge calibration , temperature switch calibration , vaccum gauge calibration , ambient air monitoring , stack emissions testing , ambeint noise level monitoring , work zone noise monitoring , drinking water testing , borewell water testing , etp inlet and outlet testing , vibration testing and analysis , vernier caliper calibration , plain plug gauge calibration , torque wrench calibration , micrometer calibration , luxmeter calibration , insulation tester calibration , clamp meter calibration , dig master press gauge calibration , dig tachometer calibration , earth resistance tester calibration , ultrasonic thickness gauge calibration , digital multimeter calibration , megger calibration , sound level meter calibration , coating thickness meter calibration , transformer oil testing , dga of transformer oil

CTN :42298598

03 Nov, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : providing of custom bid for services - custom bid for services - valce salvaging job; f work covers salvaging of defective sc valves and restoring them for reuse as per standard procedures and instructions of the officer-in-charge. the contractor shall carry out the following activities in a safe, systematic, and accountable manner: 1. salvaging operations salvaging of defective sc valves shall be carried out as per laid-down procedures using the valve test bench and/or any other equipment or method advised by the officer-incharge. the contractor shall collect defective sc valves from the store after obtaining necessary approvals. 2. cleaning & preparation clean all defective sc valves in the ultrasonic valve cleaning machine and/or other approved valve cleaning systems. ensure all valves are thoroughly cleaned to remove dirt, oil, or contaminants before testing. segregate cleaned valves properly for further inspection and testing. 3. segregation & testing segregate valves based on their source (e.g. hot repair, defective, pin leak, scrapable cylinders, etc.). perform low pressure and high pressure testing of the valves as per laid-down procedures and test parameters. identify valves that are fit for reuse and those that are defective/rejects. 4. salvaging & assembly replace the old o -ring washer of all good salvaged valves with new o -ring washers (to be provided by hpcl). fit safety caps and back covers on the salvaged valves to protect them from dust and contamination. ensure salvaged valves are clean, properly assembled, and ready for storage. 5. storage & documentation arrange salvaged valves type-wise in a countable and organized manner and deposit them in the stores. ensure proper handling to avoid damage or mixing of valve categories. maintain shift-wise records of: o number of valves received, o number of valves cleaned, tested and salvaged, o number of valves rejected. 6. manpower & productivity contractor shall provide minimum one manpower per shift. a minimum target of 400 sc valves shall be salvaged per manpower per shift. inventory of defective valves pending salvaging shall not exceed one day s generation. 7. materials & consumables hpcl shall provide o -ring washers, safety caps, back covers, and other reusable fittings. kerosene and other cleaning consumables shall be supplied by the vendor. contractor shall ensure availability of all tools and accessories required for smooth execution. 8. certification & payment the shift officer shall certify the salvaged quantity at the end of each shift. payment shall be made strictly on actual quantity salvaged and accepted by hpcl. any deviation or failure to meet daily targets may attract penalty as per tender terms. 9. safety & compliance all activities shall be carried out in compliance with hpcl safety norms and oisd guidelines. personnel shall wear required ppe (gloves, goggles, shoes, helmet) during operations. all salvaging and testing activities shall be conducted under the supervision of hpcl personnel.

CTN :42360275

04 Nov, 2025 2.00 Lacs

Allahabad - Uttar Pradesh

Tender For corrigendum : providing of repair and overhauling service - the scope of work includes the repair/replacement & servicing of medical gas outlets, pendant systems. the work involves repair of pendant (make prenit world) oem fitted with bs type outlets oem (make g.samaras s.a.) (oem authorization must be submitted) as per htm/iso standards, ensuring proper fixation, alignment, leakage testing, and gas-specific color coding. pendant switch sockets, including power points, will be installed and wired with proper safety compliance. all pendant units will undergo servicing, which includes inspection for damages or corrosion, surface preparation, and repainting with paint, along with lubrication of joints and bearings, tightening of fasteners, and balancing of arms to ensure smooth 360° rotation. electrical wiring within the pendant will be carried out using fire-retardant, wires with proper routing, insulation, termination, and functional testing. the medical gas pipeline inside the pendant will be laid using high pressure tube as per htm 02-01/nfpa standards, including in compliance with oem guidelines.

State Government

CTN :42076004

04 Nov, 2025 NA

Surendranagar - Gujarat

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - surendranagar pumping station; work of testing, examination, inspection and certification for lifting machines chain pulley blocks, lifting tackles, pressure hydro test ..

State Government

CTN :42443415

14 Nov, 2025 3.66 Lacs

Korba - Chhattisgarh

Tender For tender work for hydraulic testing and refilling of abc stored pressure types of fire extinguishers & co2 gas cartridge of htps, cspgcl, korba west.

State Government

CTN :42353229

14 Nov, 2025 62.02 Lacs

Gandhinagar - Gujarat

Tender For supply, installation, testing and commissioning of bowser filling arrangement at fire station in dta area of gift city - 1200016578vertical turbine pumpset 6000 lpm 40 m"pump set:supply, installation, testing and commissioning of vertical turbine pumping set complying to moc as mentioned below;a) discharge head material - steel fabricatedb) column pipe material - steel fabricatedc) line shaft and coupling material ss aisi 410d) bowl diffuser material - cast iron fg 260e) impeller - bronze lbt2f) pump shaft material - ss aisi 410g) seal material - gland packingh) suction bell strainer material - ss aisi 304 pn 16 compliant pump with motor of ie2 efficiency rating, 1450 rpm, ip 68 enclosure suitable for 400 or 440 volts, 3 phase, 50 hz a.c.supply no. of pumps: 2 (1 working +1 standby) equal to 1 set . complete set system to be mounted on a suitable footing, suction should include suitable strainer arrangement.pump set shall be suitable for opration to suit for fire water circulation. pump set to be installed in underground fire water tank.minimum pump efficiency 70 percent.the cost must be inclusive of associated civil work complete as per instruction of giftcl engineer- in - charge.the cost includes lifting, shifting, loading, unloading, testings etc. as required for installation as per drawing and as directed by giftcl engineer-in-charge.for bowser filling arragement at fire station, gift city set of two pumps( 1 working+ 1 standby)capacity - 6000 lpmhead - 40 m, 1200016579ms erw pipe c class 250mm dia"ms pipe: ""supply, installing, testing and commissioning of erw ms pipe of c class (heavy duty) conforming to is 3589 as per tender specification and as directed by the engineer in-charge. pipes to be supplied with bevel ends and to be black varnished on outside surface. painting with primer application and 2 coats of enamel paint of approved colors.quoted rate shall includes the following:a. supply & installation of fiitings like blind flanges with matching flanges (as per asme 16.47 series b/is 1538), elbows, tees, reducers (as per asme 16.9), mitre joint, asbestos free gaskets, nut bolts, reinforcement pads, suitable structural support arrangement etc. painting with primer application and 2 coats of enamel paint of approved colorsb. lifting, shifting, loading, unloading, cutting, grinding, welding, non destructive testings like visual test, dpt, rt etc. as required for installation of pipe as per drawing and as directed by engineer-in-charge for the following size: 250 mm dia erw pipe of minimum 6 mm thickness""", 1200013274sitc 200mm dia erw pipe"supply, installing, testing and commissioning of erw carbon steel pipes of grade fe 410 conforming to is 3589 as per tender specification and as directed by the engineer in-charge. pipes to be supplied with bevel ends and to be black varnished on outside surface. painting with primer application and 2 coats of enamel paint of approved colors.quoted rate shall includes the following:a. supply & installation of fiitings like blind flanges with matching flanges (as per asme 16.47 series b/is 1538), elbows, tees, reducers (as per asme 16.9), mitre joint, asbestos free gaskets, nut bolts, reinforcement pads, etc. b. lifting, shifting, loading, unloading, cutting, grinding, welding, non destructive testings like visual test, dpt, rt etc. as required for installation of pipe as per drawing and as directed by engineer-in-charge for the following size: 200 mm dia erw pipe of minimum 6 mm thickness", 1200013276sitc pressure guage 0-6 kg/cm2 rangesupply, installation, testing & commissioning of 150 mm dial size pressure gauge with range 0 - 6 kg/cm2 to monitor the pressure in line, with accuracy 1 percent of span, overage protection 150 percent of full range and ip 65 enclosure protection as per tender specifications and as directed by the engineer in-charge., 1200000526nrv 250 mm sitcnon return valves- providing, supplying, lowering, laying and jointing in position following c.i.d

State Government

CTN :42380519

17 Nov, 2025 5.23 Crore

Multi City - Karnataka

Tender For survey investigation design supply installation testing and commissioning of tank filling scheme head works consisting of construction of intake well with connecting pipe jack well cum pump house vertical turbine pumps coupled to motors pump house elec works necessaty valves delivery pipe manifold system electrical panel soft starter capacitors 11kv transformer 11 or 0.433 kv substation kv power line and 11kv terminal bay rising main pressure distribution for filling up of 5 nos of mi or zp tanks by lifting water from bhadra river near donabaghatta village of bhadravathi taluk including operation and maintainance for a period of 5 years after successful completion of work for donabaghatta tank filling scheme on turn key basis

Recreation Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

State Government

State Government