Latest rectangular plate Tenders | Government rectangular plate Tenders

CTN :45448929

17 Jun, 2026 NA

Amritsar - Punjab

Tender For bid to ras supply of door lock assy rh , door lock lh , pressure plate assy , clutch facing kit , clutch release brg , cable assy comp , brush carrier plate

Central Government/Public Sector

CTN :45547055

01 Jul, 2026 NA

Nagpur - Maharashtra

Tender For supply of electric point machine rotary locking type, high thrust 220 mm throw,ac immunity 160 v ac,non trailable to operate on 110v dc completed with lock detector slides, cable termination box as per rdso specification no.irs: s: 24-2025 rev 3.0 or latest amendment. 1.the point machine and ground connections are as per drawing no. mentioned in rdso's letter no. sts/e/pm/220 mm vol-1 dated 23.5 2019. ground connection shall be as per rdso drawing no. rdso/s-3454 alt.-a consisting of (i) 1 in 8.5 turn outs bg 60 kg on prestressed concrete sleepers fitted with irs point machine ( 220 mm throw) for independent switch locking and clamp point lock (160 mm throw of point) with p bracket as per drawing no. rdso/s- 3454 alt.-a (ii) facing point bg switch extension bracket/insulation plate left hand and right hand as per drawing no. rdso/s-3591-3592-3593 (iii) facing point bg detector rod far end/near end as per drawing no.rdso/s-3594-95 (iv) facing point bg lock rod far end /near end as per drawing no. rdso/s-3596-97 (v) detector rod lug and lock rod lug as per drawing no. rdso/s-3598 (vi) special ms plate for s&t fittings on psc sleepers as per drawing no. rdso/t-3901 (vii) clamp type lock 60kg (tws)-bg-bolt special head as per drawing no. rdso/s/3599 alteration if any are applicable. one set of tools in a suitable tool box shall be supplied along with every 5 nos. of point machines consisting of (i) m6/m8/m18/m22/m20 box spanners (ii) m10/12 spanners (iii) adjustable wrench (iv) screw driver 300 mm long. 1:8.5 turnout. [ warranty period: 30 months after the date of delivery ] ]

Corporations And Associations And Others

CTN :45475995

17 Jun, 2026 NA

Batala - Punjab

Tender For contract for supply of cane cutting knives - csm ajnala, make: zuper/imco/tfipl cane cutter knives as per drawing no. acsm 61 for cutter length 465 mm, make: zuper/imco/tfipl tips for cane cutter/cane chopper knives. size 8" x 25 mm approximate weight 1.52 kg, csm batala, make: zuper/imco/tfipl hardened up to 45-48 hrc double edge cane cutting knives duly hard faced to be done by n6006 moc: is-2062e 250 br size:- 25x525x160 mm as per drawing no. m126_0266e, csm bhogpur, make:- imco/tfipl cane cutting knives duly forged & tempered made from shock resistance ms plate 25mm thick confirming to is - 2062. hardness 56-58 hrc/550 bhn, tensile strength - 65kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r2 with hard facing., make:- imco/tfipl cane cutting knives dully forged & tempered made from shock resistance ms plate 25mm thick confirming to is-2062. hardness-56-58 hrc/550 bhn, tensile strenght-65 kg/mm, yield strength 50 kgf/mm elongation 20 % min with proper heat treatment to avoid breaking the knives as per drawing no. mh-0303-r3 with hard facing., csm budhewal, make:- zuper/imco/tfipl cane cutting knives for cane cutter as per drawing no. ce/87-12 (duly hard faced) made from 25 mm thick ms plate grade is-2062 make sail, csm fazilka, make:- zuper/imco/tfipl cane cutting knives without hard facing as per drawing no. 310r, csm gurdaspur, make:- zuper/imco/tfipl chopper knives material - is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0255a both side hard facing to be done by n6006 electrode, make:- zuper/imco/tfipl cane leveller knives material- is: 2062 e250 br, tip will be both side hardened upto 45-48 hrc as per is 8461 drawing no. m125-m0256a both side hard facing to be done by n6006 electrode, csm morinda, make zuper/imco swing knife type cane cutter knives with domite tips as per our existing size and design, csm nawanshahr, make:- zuper/imco/tfipl cane cutting knives as per drawing no. m-350 with hard facing, csm nakodar, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-336-3m, make: zuper/imco/tfipl cane cutting knives (machine finished) without hard facing as per drawing no. sm89-337-3m

Central Government/Public Sector

CTN :45469120

24 Jun, 2026 NA

Malanjahknd - Madhya Pradesh

Tender For supply of wear plate thickness 12mm (8mm ms base plate+ 4mm hard facing for wear resistance) as per drg no -1

CTN :45469879

17 Jun, 2026 NA

Amritsar - Punjab

Tender For supply of clutch facing kit , clutch cyl assy , sleeve cyl assy , drive assy pinion , clutch plate assy , tie rod end , clutch release brg , magnetic solenoid switch

Central Government/Public Sector

CTN :45386466

09 Jun, 2026 49.41 Lacs

Visakhapatnam - Andhra Pradesh

Tender For running maintenance of technological equipment in converter shop of sms-1.- repair of technological structures in converter shop, mixer discharge spout door rope changing, lance oxygen and water hoses replacement and hose shifting , lance guide minor structural repairs during operation, assistance in removal of lance from thimble socket, converter tilt drive lube oil topping up in lube tank, minor structural repairs of ferro alloy chutes, hoppers and bulk material chutes during converter operation, shifting of stc, sptc&sdc, various running repairs of stc, sptc, sdc, and sample&service car, lime fines screw feeder jamming rectification by cleaning, shifting of mobile equipments like debricking m/c during breakdown in front of converter., tap hole drilling m/c drill bit hard facing, telescopic hoist rope changing/portable repair during relining of converter, well mix pipe changing in l.p bay, steel teeming ladle bell crank lever bracket/ trunnion collar changing, steel teeming ladle bottom purging adapter plate fixing, hot metal tilter /steel teeming ladle resting bracket repair, various minor structural and other repairs like dart pipe centering, tip cleaning and device locking etc in slag cut off device.replacement of charging crane/ mixer crane tilter hook, assistance in shifting jack car and telescopic hoist, minor repairs of lance carriage balancer during operation of converter, minor repairs of lance foldable platform &lance stands, minor repairs of dog house & dog house doors during operation, hot metal ladle spout repair, lub pump changing in revamped converters, shifting, jam cutting and other minor repairs of lance assemblies.

corporations/Associations/Others

CTN :44090557

02 Jun, 2026 NA

Cuddalore - Tamil Nadu

Tender For bid to ras supply of st010240722 mill beater plate 70mm with hard facing outer plate , st010240721 mill beater plate 100mm with hard facing inner plate

CTN :45182405

01 Jun, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : supply of split air conditioner, wall mount type (v3) isi marked to is 1391 (part 2) (q2) , split air conditioner, floor mount type (v3) isi marked to is 1391 (part 2) (q2) , supply and fix window type air conditioner electric driven single phase cooling capacity 4500 k cal per hour 1.5 ton bee 3 star , material and labour for sub-main wiring surface type with two run of pvc insulated, unsheathed, frls single core and one run of 4.0 sqmm copper conductor , supply and fix single pole and neutral enclosure 240 volt, 20 amps with a two pin and earth plug and socket complete with one single pole mcb , supply and fix automatic voltage stablizer single phase 220 volt 50 hz of capacity 5 kva all as specified and as directed , m and l cutting chases, pinning in making good to facing where required and pointing in cement mortar 1-3 to ends or edges of landings, steps, cils, sunshades sheleves, lintels, etc , material and labour for sub-main wiring surface type with two run of pvc insulated.unsheathed, frls single core and one run of 6.0 sqmm copper conductor , m and l for stand bracket fabricated from structural steel section suitable for 3 ton ac outdoor unit including nut, bolt, washer, welding. bedding cold or hot , supply and fix single pole and neutral enclosure 240 volt, 40 amps with a two pin and earth plug and socket complete with one single pole mcb , supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and 90 v to 300 v with output voltage stabilized at 230 v , supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type and d 170-270 volt with output voltage stabilizer at 230 volt , s and f motor starter 25 amp with on off push type switch, modular type two module make make legrand-gm-havells , s and f socket 25 amp modular type two module make legrand-gm-havells , s and f metal flush box, modular type four module make legrand-gm-havells , s and f cover plate with metal frames, modular type four module make legrand-gm-avells , m and l for stand-bracket fabricated from structural steel section suitable for 1.5 ton- 2 ton ac outdoor unit including nut, bolt, washer, welding. bedding cold or hof, drilling holes for bolts , supply and fix power socket 240 volt ac 25 a 2 module all as specified and directed , supply and fix 25 a motor starter 2 module all as specified and directed , supply and fix modular white cover plate metallic frame 2 module all as specified and directed , supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 90 v to 300 v 230 v //bid details 2 / 25

CTN :45354614

08 Jun, 2026 NA

Amritsar - Punjab

Tender For supply of door lock assy rh , door lock assy lh , deareation tank , pressure plate assy , clutch facing kit , magnatic solenoid switch , feed pump assy

corporations/Associations/Others

CTN :45287797

27 May, 2026 NA

Dharmapuri - Tamil Nadu

Tender For disposal of scrap - scraped- aluminium body item & cut pieces, scraped-all ms angles cut pieces and seat frames pieces, scraped g.i.sheet & cut pieces, scraped-used waste engine oil 210 ltr with barrel, scraped spring leafes with clamp and without clamp, scraped 210 ltr empty closed metal barrel, scraped - 182 kgs empty open metal barrel, scraped 200 ltr empty tyre plant barrel, scraped - 210 ltr capacity empty plastic barrel, scraped - gear wheel & shaft, scraped - aluminium piston and aluminium item, scraped bearing & cone, scraped brass rivet and brass item, scraped- hanger & shackle, scraped- brake drum & cylinder liner, scraped - clutch plate, scraped-all types of filter(2.248mt), scraped - brake lining & clutch facing(56.202mt), scaped-auto electrical item, scaped -bus wheel disc with out ring, scraped-all auto steel spares & spring buses bolt nut item, scaped computer & printer items 1.thcl- p iv -2.8 ghz -5nos 2.hp- piv- 3.8 ghz -3nos 3.ccs-piv-2.66 quad -4nos 4.hcl -intel core p55 2.66 ghz -5nos printer items 1.tvs hd 245 gold (dot matrix) -6nos 2.tvs hd 245 gold (dot matrix) -9nos 3.tvs msp 455 xl classic(dot matrix)-6nos 4.epson lq1310 classic (dot matrix)-15nos 5. epson l405 inkjet 1no, scraped 12v 21p monolid battery (150ah), scraped 12v 25p monolid battery (180ah), scraped - frp cowl material(4.445mt), scraped all rubber bed oil seels, fan belts & rubber items, scraped tyre buffing dust at rc unit, scraped-10.00 x20 radial tyre at rc unit, scraped 295/80r/22.5 tube less radial tyres at rc unit, scaped-10.00x20 tube with mouth at rc unit, scaped-flaps ,flap cut pieces, scaped-10.00x20 tube cut pieces at rc unit, tn29/n2773 cond.scrap of bus body shell with damaged 1 pass seat frame assy.-7 nos, 2 pass seat frame assy. -5 nos, 3.hat track 2nos as it is condition, tn29/n2766 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -7 nos, 4.hat track 2no as it is condition, tn29/n2832 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -12nos, 4.hat track 2nos as it is condition, tn30/n1615 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy. -12nos, 4.hat track 2no as it is condition, tn29/n2757 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-7 nos, 3 pass seat frame assy-12 nos, 4.hat track 2nos as it is condition, tn29/n2750 cond.scrap of bus body shell with damaged 1 pass.seat frame assy-1no 2 pass seat frame assy.-8 nos, 3 pass seat frame assy-12 nos, 4.hat track 2nos as it is condition, scaped-new chassis cabin, scaped-ply wood(3.793mt), scaped-fly wheel with ring

Rectangular Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others