Latest rectangular plate Tenders | Government rectangular plate Tenders

CTN :40427291

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras tender for supply of bracket mounting centre (plate xxviii a) , hose (plate xxx a) , bucket square hole (plate xxxi w) , hose hoc (plate xiii s) , cab reinforce member lh (plate iv an) , pin pivot(plate-b3-1-1 , sl no-10) , pin pivot (plate v n) , pin pivot (plate vi r) , installation throttle pedal servo brakes (plate , pipe right hand auxiliary short arms (jcb super pl , cab reinforce member rh (plate iv an) , cover stowage lh (plate iv ak) , plate rectangular (plate iv an) , clamp hydra cyl assy (plate vi e) , steering shaft keyway (jcb super plate xii c) , bearing , fork selector 1st (plate xxi c) , hose 10 bsp lp 2580 (plate xiii r) , lever , parking brake , panel side grill lh (plate iii u) , pipe cover front (plate iv w) , pipe cover side lh (plate iv w) , cover pipe front (plate iv x) , cover pipe side rh (plate iv x) , console heater less (plate iv ac) , box storage rh (plate iv al) , plate stowage lid right side (plate iv al) , cover stowage rh(plate iv al) , coupling , hose 3 by 8 bsp 1410mm (jcb super plate xiii n) , gear idler , 35t (plate xxi c) , hose high pressure (jcb super plate xiii i) , drive flange forging 15 (plate x n) , hose 10 bsp hp 2370 mm (plate xiii aa) , piston (plate xvi n) , gear 1st 44t ss700 , toeplate 391 mm wide 6 hole (plate xxxi c) , floor mat (plate iv ah) , hose (e1-9-14) , hose 10 bsp hp 850 hyd (plate iv a) , kit sensor water in fuel (plate xxx c) , latch assy inner rh (plate-iv n) , safety strut , hose (plate xxvi a) , plate stowage lid leftside (plate iv ak) , pin pivot (plate vi l) , cover stowage front (plate iv ab) , strip door entry (plate iv ah) , floor mat protector (plate iv ah) , plate cover excavator (plate vi ab) , joint universal (plate x f) , rim steering wheel (plate xii e) , pin pivot (plate xviii d) , gear 3rd 33t 3.5m (plate xxi c) , seal transmission , pin (plate vi b) , hydra clamp cylinder-lower , bearing , guard stone left hand sideshift (plate iii x) , guard stone rh sideshift (plate iii x) , hose (jcb super plate xiii j) , parkbrake caliper g.a (ispl sl-1691) , valve relief unloader , 207 bar (plate xv b) , hose top port (jcb super plate xiii k) , hose top port (plate xiii l) , thrust bearing , hose bottom port (jcb super plate xiii l) , valve auxiliary 310 bar (plate xv b) , spindle roller (plate iv u) , cover inner fender lh (plate iv ab) , box stowage lh (plate iv ak) , pin pivot (plate vi m) , harness maxi fuse (plate viii e) , valve block assy , window frame rh (plate iv q) , lever (plate vi w) , cable battery (plate viii e) , cable battery -ve (plate viii e) , shaft kit pump drive (plate xiv c) , kit seal (plate xv b) , hose bottom port(plate-xiii k-2) , kit seal (plate xvi b) , kit seal (plate xvi d) , liner roof (plate iv g) , coupling yoke(jcb steering axle f1-6-30) , kit seal power trk rod ram 75mm cyl x 45mm rod(e4- , kit seal (plate xvi c) , yoke coupling 30 , lever assy gear turret(plate-f5-1-50) , relay grid heater 12 volt (plate xxvii a) , cluster warning light(plate-c3-1-11) , air filter (plate xxvi a) , bucket ram seal kit(jcb super xvi n-13) , kit seal (plate xvi l) , kit seal (plate xvi f) , fork selector 3rd (plate xxi c) , yoke , coupling 1480 , solenoid assy 3 way (plate xxi b) , gear 22t & plate carrier(jcb super plate xxi f) , gear 31t & plate carrier (jcb super plate xxi f) , plate baffle , oil (jcb super plate xxi e) , gear transfer 39t (plate xxi c) , switch panel 4wd by 4wd by actuator , kit-gear differential (jcb super plate xviii k) , kit seal (plate xv e) , layshaft 16t 4m & 28t 3.5m (plate xxi c) , seal kit (plate xvi j) , spill guard , pump gear 14 cc (plate xiv b) , lead grid heater +ve feed (plate xxvii a) , valve outlet (plate xv b) , rod piston (plate xvi b) , gear main shaft , ss750 (plate xxi c) , rod piston (plate xvi l) , piston rod (plate xvi n) , gear output 34 teeth (plate xxi b) , cylinder (plate xvi b) , piston rod (plate xvi g) , tank diesel , assy (plate iii c) , valve 2nd section (jcb dx sup

CTN :40658906

19 Jun, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of mild steel plates 16x2200x5600 to spec. is: 2062:2011 grade e 300 bo. specn: is : 2062:2011 grade e 300 bo. [ warranty period: 30 months after the date of delivery ]

CTN :40678898

16 Jun, 2025 NA

Mumbai - Maharashtra

Tender For arrangement of lifting and transportation of mild steel plates ganpati immersion2025 at girgaum chowpatty in d ward

CTN :40621871

16 Jun, 2025 NA

Varanasi - Uttar Pradesh

Tender For supply of mild steel plates 25 x 2000 x 4500 to the specification is:2062:2011 grade e 300 b0 [ warranty period: 30 months after the date of delivery ]

CTN :40580630

18 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of plates for vrmp tank modifications - plate,mild steel,is2062,e250b,3mm thk , plate,mild steel,is2062,e250b,6mm thk , plate,mild steel,is2062,e250b,10 mm thk , plate,mild steel,is 2062,e250b,14mm thk , plate,mild steel,is2062,e250b,16mm thk , plate,mild steel,is2062,e250b,20mm thk , plate,mild steel,is2062,e250b,22mm thk , plate,mild steel,is2062,e250b,26mm thk , plate,mild steel,is2062,e250b,32mm thk

Central Government/Public Sector

CTN :40588234

24 Jun, 2025 NA

Dahod - Gujarat

Tender For supply of mild steel plates 6 x 1500 x 6300 mm. to the specification is:2062:2011 (7th rivision) with amendment no-1 of nov-2012, grade e 250 cu. quality a. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40578927

23 Jun, 2025 NA

Dahod - Gujarat

Tender For supply of mild steel plates 5 x 1250 x 6300 to the specification is:2062:2011 (7th rivision) with amendment no-1 of nov-2012,grade e 250 cu. qua lity a. " [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40565889

13 Jun, 2025 NA

Ahmedabad - Gujarat

Tender For tender for providing construction material supplies for financial year 2025-26-, item no- 1 supplying common bunt clay bricks conventional size, item no- 1 supplying common bunt clay modular bricks 20x10x10 size, item no- 2 supplyion of 53 or 43 grade open on pipe cement of isi approved brand, item no- 3 supplying of fine sand on sie, item no- 3 supplying of corse sand on sie, item no.4 providing and fixing 35 mm thick shutter for door and window and clear story window including anodised alluminium butt hinges with necessary screws.(a) indian teak wood.(ii)fully panelled, item no. 5 providing 25 mm thick for cupboards etc including black enamelledd m.s.butt hinges with necessary screws. partly panelled & partly glaged with iron hinges,, providing and fixing glazed louvered glass window and ventilation with teak wodd frame 10 com x 7 cm size incl. 3 coat of oil painting to wood work etc., item no- 7 supplying rough kota stone 25 mm thick, item no- 8 supplying of glazed times of 15 x 15 x 6 cm size or approve size, item no- 9 supplying of vitrified tiles 24 x 24 size antiskid, item no- 10 supplying of dry distember primer, item no- 11 supplying of distember primer, item no- 12 supplying of water proof cement paint, , supplying of birla well care putty, supplying of plastic emulasion paints, item no- 13 suplying of indian type squating pan w.c., item no- 14 supplying of urinol, item no- 15 supplying of upvc pipe (a)20 mm dia, item no- 15 supplying of upvc pipe (a)15 mm dia, item no- 15 supplying of upvc pipe (b) 32 mm dia, item no- 15 supplying of upvc pipe (b) 25 mm dia, item no- 15 supplying of 6 kg/ cm2 pvc pipe (c) 110 mm dia, item no- 15 supplying of 10 kg/ cm2 pvc pipe (c) 110 mm dia, item no 16 supplying of 100 mm dia, 60cm long ston ware pipe, item no 16 supplying of 160 mm dia upvc, pipe, item no- 16 supplying of brass screw down bib tap of 15 mm dia, item no- 17 supplyin of c i nahni trap, item no- 17 supplyin of pvc swr gully trap 160x110, item no- 18 supplying of pvc water tank of approved make, item no- 19 supplying of 32 mm gun metal valve, item no-20 c i cover with frame size 500/700, item no-21 c i cover with frame size 300/300, item no 23 supplying of tmt bars fe415 rinforcment for rcc work, item no - 24 supplying of stainless steel glosy asis 304 grade 1mm thick with over all size 610x460 mm and bowl size560x410x200, supplying of 30 mm thick factory made solid panal pvc door stter, part-2, item no- 22 supplying of paver block mk 250 grade 60 mm thi, item no- 23 supplying of curve, part-3, item no.-24 supplying of np-2 non pressare pipe (a)150 mm dia, item no.-24 supplying of np-2 non pressare pipe (b)300 mm dia, item no.-24 supplying of np-2 non pressare pipe 450 mm dia, item no.-24 supplying of np-2 non pressare pipe (d)600 mm dia, item no.-24 supplying of np-2 non pressare pipe (e)900 mm dia, item no.-24 supplying of np-2 non pressare pipe (f)250 mm dia, item no.-25 supplying of np-3 non pressare pipe (b)300 mm dia, , item no.-25 supplying of np-3 non pressare pipe (b)450 mm dia, item no.-25 supplying of np-3 non pressare pipe (b)600 mm dia, item no.-25 supplying of np-3 non pressare pipe (b)900 mm dia, part-4, item no- 26 supplying of 10mm aggregate, item no- 26 supplying of 20mm aggregate, item no- 26 supplying of 40mm to 63mm aggregate, item no- 26 supplying of stone dust, through and bond stone, supplying of rubble, part-5, item no- 27 supplyin of galvenised corrugated sheet 0.8 mm thick, gi j or l hook, item no- 28 supplying of galvenised mild steel tube 50 mm dia, item no - 32 steel work welded, in built up sections, framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (a) in beams and joists, channels, angles, tees, flats with connecting plates or angle cleats as in main & cross beamnship & jack rafters, purlins connected to common rafters and like., flat back wash basin color glazed 450x 300 size, providing and fixing extruded aluminium

corporations/Associations/Others

CTN :40551916

13 Jun, 2025 NA

Khandwa - Madhya Pradesh

Tender For auction sale of u/s cast iron scrap,u/s crusher hammer / screen plates scrap,u/s mild steel scrap,grinding roller of pulveriser,u/s bullring segment scrap,u/s bearing scrap,u/s conveyor roller with rubber linng scrap,u/s conveyor roller without rubber):scrap,u/s air heater element scrap,u/s rail wagon and loco material scrap,u/s ms pipe/erw pipe scrap,u/s stainless steel scrap,u/s coal pipe and bend with ceramic lining scrap,u/s ms scrap burner with ss tip,u/s brass scrap,u/s measuring instrument/meters relay scrap,u/s chock scrap,u/s regulator,/sw/socket, starter, light etc scrap,u/s fan electrical scrap,u/s mixed conveyor belt scrap(roll),u/s mixed conveyor belt scrap(cut piece),u/s jerry cane/drum plastic 25ltr empty,u/s jerry cane/drum plastic 50ltr empty,u/s battery scrap,u/s burnt lub oil with drum

Central Government/Public Sector

CTN :40529850

26 Jun, 2025 NA

Multi City - Multi State

Tender For supply of mild steel plates 8 mm to the spec. is:2062:2011 grade e 250 c cu. length 5000 to 7000 m m. width 1250 to 2500 mm. [ warranty period: 30 months after the date of delivery ]

Rectangular Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector