Latest reducer bush Tenders | Government reducer bush Tenders

State Government

CTN :40901606

14 Jul, 2025 9.78 Lacs

Diu - Daman And Diu

Tender For providing erecting and fixing of electric pole accessories from check post main road to say site bucharwada panchayat area diu - supplying and erecting led street light fittings with high power white leds wattage of 3 watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses, with toughened glass with company mark/ name engraved or embossed 160 to 270v, power factor more than 0.95, thd 10%, cct 3000k to 5700k,uniformity ratio >0.45, luminaire efficacy> 100 lumens/ watt. led driver efficiency > 85%. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer in charge may select any wattage capacity between the ranges shown.) (a) street light (ip-65), surge protection- 4kv integral and, light must have 440vac line supply with over-voltage protection. 90 watts cat. ii (make: wipro, crompton, philips, bajaj, osram) as directed by the engineer-in-charge., providing and erecting street light pole bracket comprising main b class gi pipe of 4.2 cm/ require outside dia. complete with suitable b class g.i sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. / require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted with one coat of red oxide / pu base primer and two coats of aluminium / pu paint. paint with following nos of arms. single arm bracket 1 mtr, providing and erecting xlpe (is:7098) (i)-88 isi armoured cable multistrand aluminium conductor for 1.1 kv. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 16 sq. mm, supplying and erecting flexible pvc insulated multi strand multi core 1.1 kv grade isi marked copper wires of following size to be erected as directed 1.50 sq.mm 3 core round pvc sheathed., providing and erecting pipe type earthing having 150 cms. long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 swg earth wire., supplying & erecting earth pit of minimum bore dia. 150mm size approved make earthing electrode consisting pipe-in-pipe technology as per is 3043-1987 made of corrosion free hot dipped g.i. pipes having outer pipe dia of 50mm having 80-200 micron galvanising, inner pipe dia of 25 mm having 200-250 micron galvanising, connection terminal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make oem has to submit test certificate) & having back filling compound of (b) inner chemical (ccm compound)- resistivity:- 0.2 / meter testing as per iec 62561-2017, voltage drop:- 1 volt at no load & dry form, sulphar content:- 2%(c) back fill compound :- earthing compound should be capable to retain moisture for long time necessary test report must be submitted. (b) for electrical installation up to 11kv in normal soil length of pipe - 2.00 mtrs back filling compound - 1 nos bag of 25 kg., making trench in soft soil of suitable width of 90 cms deep for laying cable or locating the fault all over the run and backfilling the same and making the surface as normal ground., making trench in hard murrum / tar road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground., providing & laying approved make isi marked hdpe 6kg / cm2 (class-3) as per is:4984:1995 pe-80 to be erected at road crossing on or floor as directed for laying of cable. the pipes as follow

Central Government/Public Sector

CTN :40556205

02 Jul, 2025 NA

Katipala - Karnataka

Tender For corrigendum : supply of 1000185820 eca1ipc1z0003d01000-chiller 3ph+ n- 415v-50hz, r410a, inverter , 1000185821 wheel base p/n: 9102000002 , 1000185822 reducer bush, reducer hex nipple, hose nipple and other spares p/n: 9006000041

CTN :40802758

03 Jul, 2025 11.32 Lacs

Multi City - Karnataka

Tender For corrigendum : supply of matrials for constraction of swm , unit in grama panchayat jummanakatti - mgnrea-jmk drilling equipment, mgnrea-jmk special gelatin, mgnrea-jmk detonators, mgnrea-jmk safety fuse wire, mgnrea-jmk drilling mechanic grade i, mgnrea-jmk licenced blaster, mgnrea-jmk add sundries charges at 1 % on material, mgnrea-jmk over head & other miscellaneous charges, mgnrea-jmk broken stone aggregate 40 mm size, mgnrea-jmk broken stone aggregate 20 mm size, mgnrea-jmk broken stone aggregate 12 mm to 10 mm size, mgnrea-jmk coarse sand (zone iii), mgnrea-jmk portland cement, mgnrea-jmk mixer (concrete) - 1 cum capacity, mgnrea-jmk add watering charges at 1 % on material, mgnrea-jmk super plasticizer admixture is marked as per 9-103-1999, mgnrea-jmk mason class ii (with tools), mgnrea-jmk hom of vibrator 0.71 days, mgnrea-jmksilver oak or equivalent planks 38 mm thick, mgnrea-jmk jungle wood runners and planks, mgnrea-jmk casurina poles 75 - 100 mm dia, mgnrea-jmk add handling , loading and unloading at 2% on material, mgnrea-jmk casurina poles 100 - 150 mm, mgnrea-jmk ms flat, mgnrea-jmk bolts and nuts, mgnrea-jmk add sundries charges at 2 % on material, mgnrea-jmk rubble stones, mgnrea-jmk bond stone 20 x 20 x 45 cm, mgnrea-jmkmixer (concrete small used in culvert), mgnrea-jmk size stone 20 x 20 x 25 cms, mgnrea-jmk boulders, mgnrea-jmk mason class i (with tools), mgnrea-jmk stone chistler class ii, mgnrea-jmk add sundries charges at 1 % on labour, mgnrea-jmkadd watering charges at 1 % on labour, mgnrea-jmk brick, mgnrea-jmk add handling , loading and unloading at 1% on material, mgnrea-jmk solid concrete blocks (40 x 20 x 20 cms)-4.00 n/sqmm, mgnrea-jmk add providing and removing scaffolding at 3% on labour, mgnrea-jmk water proofing cement paint, mgnrea-jmk add brush, putty, sand paper at 2% on cost of paint, mgnrea-jmk painter class i, mgnrea-jmkbroken granite metal 20 mm, mgnrea-jmk broken granite metal 10 mm, mgnrea-jmk mgnrea-jmk ms angle iron 50mm x 50mm x 6mm, 33.8 mtr in length at 4.5 kg per mtr, mgnrea-jmk ms angle iron 40mm x 40mm x 6mm, 23 mtr in length at 3.5 kg per mtr, mgnrea-jmk gusset plates 6 mm thick, mgnrea-jmk base plate / base plate, mgnrea-jmk anchor bolts 750mm, mgnrea-jmk corbon electrodes, mgnrea-jmk welder grade i, mgnrea-jmk hom of welding and grinding machine, mgnrea-jmk add, mgnrea-jmk hom of cutting and grinding machine, mgnrea-jmk ready mix primer paint (ready mix red lead paint), mgnrea-jmk add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, mgnrea-jmk enamel metal paint, mgnrea-jmk add brush at 1% on cost of paint, mgnrea-jmk tools & plants and electrical charges at 2%, mgnrea-jmk unit cost as per the specification, mgnrea-jmk enamel paint, mgnrea-jmk add brush, putty, sand paper, roller at 5% on cost of paint, mgnrea-jmk tmt bars fe 500, mgnrea-jmk binding wire, mgnrea-jmk orissa pattern of size 580x440mm with integral type foot rests, mgnrea-jmk 100mm s or p trap, mgnrea-jmk p.v.c. flushing cistern 10 ltslow level with fitting, mgnrea-jmk c.i. / m.s. brackets for flushing cistern, mgnrea-jmk g.i. 32mm dia telescopic flush pipes with fittings specials, mgnrea-jmk m.s. holder bat clamp 32mm, mgnrea-jmk g.i. overflow pipe 20mm dia, mgnrea-jmk special for overflow pipe, mgnrea-jmk mosquito proof coupling 25mm, mgnrea-jmk add white lead paint,gasket, cement, sand for making good the wall and floor at 2% on material, mgnrea-jmk drilling equipment, mgnrea-jmk special gelatin, mgnrea-jmk detonators, mgnrea-jmk safety fuse wire, mgnrea-jmk drilling mechanic grade i, mgnrea-jmk licenced blaster, mgnrea-jmk add sundries charges at 1 % on material, mgnrea-jmk over head & other miscellaneous charges, mgnrea-jmk broken stone aggregate 40 mm size, mgnrea-jmk broken stone aggregate 20 mm size, mgnrea-jmk broken stone aggregate 12 mm to 10 mm size, mgnrea-jmk coarse sand (zone iii), mgnrea-jmk portland cement, mgnrea-jmk mixer (concrete) - 1 cum capacity, mgnrea-j

CTN :40864556

03 Jul, 2025 28.48 Lacs

Delhi - Delhi

Tender For minor work to residential qtrs. at sector-1, pushp vihar, new delhi dg. 2025-26. (sh:- change of old damge gi pipes in and their fittings to gi pipe in shaft areas of type-4 spl. and old damge rain water pipe in sand their fittings to pvc pipe in shaft areas of type-4 spl.).subwork/packages:sh:- change of old damge gi pipes in and their fittings to gi pipe in shaft areas of type-4 spl. and old damge rain water pipe in and their fittings to pvc pipe in shaft areas of type-4 spl.

State Government

CTN :40865504

05 Jul, 2025 NA

Mandi - Himachal Pradesh

Tender For co junior engineer office jal shakti sainthal in tehsil joginder nagar district mandi h.p sh installation sanitary item in je office cum residence - prov and fixing anodized aluminium tower bolt ( barrel type) anodized transparent or dyed to require shade and colour with screwa etc complete as per the direction of engineer in charge., 250x10 mm, prov and fixing anodized aluminium tower bolt ( barrel type) anodized transparent or dyed to require shade and colour with screwa etc complete as per the direction of engineer in charge., 200x10 mm, prov and fixing bright finished handles with screws etc complete as per the direction of engineer in charge. 75 mm, prov and fixng oxidized ms hooks and eyes complete as per the direction of engineer in charge 150 mm, prov and fixng 100 mm bright finished brass floor door stopper with rubber cushion screws etc to suit shutter thickness complete per the direction of engineer in charge, providing and fixing vitreous china wash down water closet ( european type w.c pan) with integral p or s trap including jointing the trap with soil pipe in cement mortar 1 : 1 ( 1 cement 1 sand) ( seat and cover to be measured and paid for separately)complete with in all lead & lifts and to the entire satisfaction of the engineer-in-charge., providing and fixing stainless steel kitchen sink of approved standard isi make with drain board and cp waste with ci or ms brackets painted white i/c cutting holes and making good the same but excluding fitting 610 x 510 mm with bowl depth 200 mm as per the direction of engineer in charge., prov and fixing brass bib tap with capson head ( superior quality heavy type) 15 mm dia, providing and fixing vitreous china wash basin with single hole for pillar tap with ci or ms brackets painted white including cutting holes and making good the same but excludinf fitting. 630x450mm, providing and fixing of pvc water storage tank sintex having capacity of 1000 ltr. with the necessary fittings including over flow pipes, scour pipes etc r inlet and outlet and inside painting with cover and locking arrangement of good quality complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 600 mm x 450 mm bevelled edge mirrior of superior glass mounted om 6 mm thick ac sheet or plywood sheet and fixed to wooden pluges with cp brass scerws and washers complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of cp brass towel rail complete with cp brass brackets foxed with wooden plugs with cp brass screws :- 750 x 20 mm. complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 600 mm x 120 mm glass shelf with cp braclet and guard rail complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm mixer for kitchen sink with top/bottom swinging spout complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi elbow complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi tee complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi socket complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 15 mm gi socket complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of 32 mm dia, lead waste pipe for wash basin or sink i/c brass check nut complete in all respect as per direction and to the entire satisfaction of the engineer-in-charge., providing and fixing of liquid soap container with cp brass lid and brackets fixed to wooden plugs with cp brass screws :- plastic container complete

Central Government/Public Sector

CTN :40842759

17 Jul, 2025 NA

Kottayam - Kerala

Tender For supply of plumbing material - 20 mm cpvc pipe , 25 mm cpvc pipe , 20 x 15 mm bt cpvc elbow , 20 mm cpvc elbow , 25 mm cpvc elbow , 20 mm 45 degree cpvc elbow , 25 mm 45 degree cpvc elbow , 20 mm cpvc coupling , 25 mm cpvc coupling , 20 mm cpvc mta , 25 mm cpvc mta , 20 mm cpvc tee , 25 mm cpvc tee , 20 mm cpvc end cap , 25 mm cpvc end cap , 20 mm cpvc ball valve , 25 mm cpvc ball valve , 25 x 20 mm cpvc reducer bush , 20 x 15 mm bt cpvc rfta , 20 mm cpvc saddle , 25 mm cpvc saddle , 20 mm cpvc fta , 25 mm cpvc fta , 25 mm pvc mta 6 kg per cm2 , 32 mm 1 pvc bend 6 kg per cm2 , 50 mm pvc bend 6 kg per cm2 , 63 mm pvc bend 6 kg per cm2 , 63 mm pvc elbow 6 kg per cm2 , 110 mm pvc elbow 6 kg percm2 , 63 mm 45 degree pvc elbow pn 16 , 63 mm 45 dgree pvc elbow 6kg per cm2 , 110 mm 45 degree pvc elbow 6kg per cm2 , 63 x 50 mm pvc reducer coupling , 63 mm pvc door elbow 6 kg per cm2 , 110 mm pvc door elbow 6 kg per cm2 , 110 mm pvc end cap , 32 mm pvc wash basin waste pipe , 15 mm pvc angle cock , 15 mm pvc washing machine tap , 15 mm pvc health faucit , 15 mm pvc float valve set , pvc water tank lid , pvc flushing cistern 10 ltr , 15 mm pvc water connection , 110 x 63 mm pvc floor trap single way , 6 mm pvc grip , 25 mm ball valve - gm , 15 mm cp 2 way angle cock , 15 mm cp angle cock , 15 mm cp sink tap wall mountedc type , 15 mm cp long body tap , 15 mm cp pillar tap wash basin , 15 mm cp 2 in 1 bib cock , 15 mm brass hose tap , 15 mm cp health faucit , 127mm x 127mm square ss grating , rack bolt with screw , 15 mm brass float valve set , 15mm x 25 mm cp extension nipple , steel sink waste coupling - 3 inch , steel sink waste coupling - 4 inch , 15 mm cp cup , wash basin -cp waste coupling - ft , ewc seat cover ordinary , flush bush rubber , syphone washer , flush inlet assembly , flush outlet assembly , flush knob , cotton waste white , solvent cement - 250 ml , shellac , teflon tape , 3 inch brass screw , 1 inch ss screw , hacksaw blade

Central Government/Public Sector

CTN :40770441

10 Jul, 2025 5.99 Lacs

Ahmedabad - Gujarat

Tender For purchase of civil and plumbing items - upvc valve half inch , chrome finish brass bib cock half inch , chrome finish brass angle cock half inch , cp brass piller cock half inch , taflon tape , upvc ball valve one inch , upvc reducer socket , upvc socket coupler , upvc brass fta two inch , brass mt two inch , upvc elbow two inch , shower rose , health faucet with assasseries , pipe u clamps three forth inch , bombay masala , white cement , upvc elbow one inch , upvc reducer socket , upvc brass mta three forth inch , upvc brass fta three forth inch , upvc brass fta , flushing cistern , gi socket half inch , upvc sintex nipple three forth , gi jolly hose clamps stainless steel three forth , gi jolly hose clamps stainless steel one inch , gi jolly hose clamps stainless steel forthy mm , gi jolly hose clamps stainless steel half inch , hacksaw blade , hacksaw blade one inch , two way angle valve cp brass faucet , m seal , roller brush , manual press urinal brass push button , turpentine oil , stainless steel door hinges , stainless steel flat head machine screw , upvc reducer bush three forth inch , upvc reducer bush one inch , upvc reducer bush one and a half inch , cpvc solvent , upvc tank nipple one inch , waste pipe , jet spry triangle nozzle , ss waste coupling , cistern flush siphon with pressure float valve , upvc gate valve twenty mm , sintex float valve fifteen mm , sintex float valve twenty mm , sintex float valve one inch , nut and bolt set for wash basin , china kill various size , gi kill various size , low level l bend pipe , upvc elbow half inch , upvc elbow three forth inch , upvc elbow , upvc elbow one and a half inch , upvc tee half inch , upvc tee three forth inch , upvc tee one inch , upvc tee thirty two inch , upvc tee one and a half inch , upvc tee two inch , upvc union half inch , upvc union three forth inch , upvc union one inch , upvc union thirty two mm , upvc union one and a half inch , upvc union two inch , fta brass half inch , fta brass one inch , fta brass thirty two mm , fta brass one and a half inch , fta brass two inch , mta brass half inch , mta brass one inch , mta brass thirty two mm , mta brass one and a half inch , upvc end cap half inch , upvc reducer bush half inch , upvc reducer bush thirty two mm , brass elbow half inch , brass tee half inch , brass elbow half by three forth inch , brass tee half by three forth inch , reducer socket half by three forth inch , reducer socket three forth by one inch , reducer socket one inch by thirty two mm , reducer socket thirty two mm by two inch , 15mm brass spindle half turn , 20mm brass concealed valve spindle , gi nipple half by three inch long , gi nipple half by four inch long , gi nipple half by six inch long , upvc solvent cement , damp proof paint , l bend pipe for indian seat

CTN :40740265

08 Jul, 2025 16.98 Lacs

Lucknow - Uttar Pradesh

Tender For supply of elbow gi 15 mm , gate valve brass 20mm , plug gi 15mm , shower rose cp long arm 150x15mm , whb cp mixture brass 15mm , pvc lid for water tank 1000ltr , shower rose pvc 15 mm with arm , socket gi 20 mm , spindle brass for cp stop cock 15 mm , spindle stop cock concealed 15 mm , union socket gi 20 mm , angle valve two way cp brass , ball cock pvc 20 mm complete set , ball cock float with rod and valve 15 mm pvc , pillar tap pvc 15 mm , shower rose pvc 15 mm , spindle brass for cp bib cock 15 mm , spindle brass for pillar cock 15 mm , spindle brass for basin mixture 15 mm , spindle brass for angle valve 15 mm , stop cock concealed cp brass15 mm , elbow gi 20 mm , plug gi 15 mm , cl reducer bush 20x15 , cl ball valve 15 mm , cl ball valve 20 mm , elbow reducing 20x15 mm gi , long screw with gi nut 15x150 mm , long screw with gi nut 20x150 mm , tees gi equal 15 mm , tees gi equal 20 mm , tubing mg gi 25 mm , tubing mg gi 20 mm , union socket gi 15 mm , sluice valve 200 mm , sluice valve 250 mm , cl plug 25 mm , cl plug 40 mm , clamp ms 40x15 mm , cl ball valve 25 mm , elbow gi 25 mm , gate valve brass 25 mm , gi nipple 20x80 mm , gi nipple 25x80 mm , gl hexa nipple 15 mm , long screw with gi nut 25x150 mm , nipple gi 15x50 mm long , nipple gi 15x75 mm long , nipple gi 20x100 mm long , nipple gi 20x175 mm long , nipple gi 20x50 mm long , nipple gi 20x75 mm long , nipple gi 25x100 mm long , nipple gi 25x50 mm long , non return valve 15 mm , plug gi 20 mm , socket gi 15 mm , stop cock ci 15 mm , stop cock ci 20 mm , tee gi reducing 25x20 mm , tees gi equal 25 mm , tees gi reducing 20x15 mm , tubing gi 100 mm , tubing gi 50 mm , union socket gi 25 mm , gate valve brass 40 mm , tubing gi pipe mg 15 mm , tubing gi pipe mg 20 mm , elbow 40 mm , socket gi reducing 20x15 mm , socket gi reducing 25x15 mm , socket gi reducing 25x20 mm , elbow reducing 25x15 mm , tee joint 15 mm , sluice valve 80 mm , sluice valve 100 mm , sluice valve 150 mm

CTN :40728636

07 Jul, 2025 NA

Darjeeling - West Bengal

Tender For supply of ms shs fabricated steel structure 18 nos containers including staircase and water tank staging minimum weight , 0 point 50 mm trapezoidal ppgi az 150 550 mpa sheet having green camouflage pattern size 3500 mm x 1070 mm weight approx 16 point 70 kgs per sheet , 0 point 50 mm ridge cover of size 250 plus 250mm 500 mm 3000 mm length camouflage pattern , shelter flashing 0 point 50 mm properly rivetted in floor wall ceiling internal external corners including outside joint as per tech specs , 60 mm thick wall and partition panels fixed with the shelters , 60 mm thick false ceiling panels fixed with the shelters , 60 mm floor panels fixed with the shelter , 3 mm thick spc stone plastic composite waterproof flooring fixed on floor panel in all areas except toilet block , aluminium chequered sheet 1 point 5mm thickness fixed on floor panel only in toilet block areas except bathing and toilet area , doors 900 x 2135 mm internal panel made from 60 mm thick puf panels having aluminium lipping all around outer frame to be made with 2 mm thick ms painted profile , toilet doors 700 x 2000 mm internal panel made from 30 mm thick solid pvc panel outer frame to be made with 2 mm thick ms painted profile , aluminium 2 track sliding double glass unit insulated windows 1000 x 1000 mm , window canopy with ppgi sheet and angle iron frame , aluminium top hung ventilator of size 450 mm x 600 mm , aluminium canopy with ppgi sheet and angle iron frame , aluminium fixed verandah glazing with toughened glass 5 mm thick of size 1200 mm x 2400 mm , foundation bolt 40 x 450 mm , m 25 x 100 mm ht nut bolt , stsd screws for roofing rivets for flashing nut bolts for canopy , ms steel lockers of size 2100 mm height x 900 mm width x 475 mm depth double door duly painted in approved shade , office chairs rotating type with puf cushion and rubber hand rest , steel office table of size 1200 mm length x 760 mm width x 900 mm height with 3 drawers 1 cupboard and 18 mm thick prelaminated board as per tech specs , fire extinguisher a b and f type 2 kgs , water dispenser 15 ltr capacity , waste dustbin 10 ltr , 2 kva off grid solar plant with solar pv module 12 volt 335 watts along with all wires junction box connectors gi frame for fixing of panels , 2 kva pure sine wave solar invertor along with cables and fittings as required , solar battery 12 volts 200 ah gel based lithium based along with battery cabinet and cable as required , fd kero heater size 44 point 6 x 44 point 6 x 58 cm heating performance 6 point 3 kw fuel tank capacity 7 point 2 ltrs oil consumption min 0 point 24per max 0point 74 ltr per wt 12 kgs , drapery rods with brackets for curtain , all internal sanitary fitting hot cold water pipelines drainage up to the shelter will be fixed in supplier manufacturing unit external plumbing and sanitary items will be supplied with the shelter , vitreous wash down water closet pan with flushing system cistern combo with p or s trap and flushing pipe complete including all joints complete , stainless steel grade 304 shower floor pan of size 1150 x 1030 mm make jayna bluestar diamond oblique amc or equivalent , vitreous wash hand basin white 550 mm x 400 mm flat back including providing ci brackets cp pillar tap cp angle cock with all accessories as per brief tech specs , wash basin looking mirror 450 mm x 900 mm , ss soap dish , aluminium peg set of 6 , wash basin mixture cp for hot and cold , bib tap long body cp 15mm bore , bib tap short body cp 15mm bore , stop cock cp 15 mm bore , ss jali 4 inch , pvc flushing cistern 10 litres capacity with pvc connections 600 mm long and waste pipe , 20 mm ppr pipes pn 16 for hot and cold water supply in all bathing area and washbasin along with all connections like ppr tee elbow socket reducer etc complete in all respects , 20 mm ppr pipes pn 16 for cold water supply in toilet area and urinals along with all connections like ppr tee elbow socket reducer etc complete in all respects , 25 mm ppr pipes pn 16 for ho