Web Analytics Made Easy - StatCounter

Reducer Coupling Tenders

Get complete information related to latest Reducer Coupling Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Reducer Coupling Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Reducer Coupling Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Corporations And Associations And Others

CTN :40536239 Due date: 12 Jun, 202512 Jun, 2025 NA
Tender For servicing & overhauling of 03 phase/415v/250 kw crompton greaves make induction motor & vt pump set no.-1 including supply & fitting of bearings, coupling and other associated works including testing & commissioning at 100 cusec ganga jal wtp siddharth vihar, ghaziabad

CTN :40374098 Due date: 31 May, 202531 May, 2025 1.82 Lacs
Tender For corrigendum : repair to priming pumpset, coupling set of pumping unit no.3 and providing/fitting of wire mesh along the sump for protection from polybags/garbage etc. along with other allied works at lis rathua.

CTN :40253011 Due date: 31 May, 202531 May, 2025 NA
Tender For bid to ras tender for supply of safety filter(jd mk-i plate-03) , bushing (plate-j-15) , lub fitting (ispl plate-i02) , cap screw m12 x 100 , turn indicating lamp lh(ispl plate-h03) , turn indicating lamp rh (ispl plate-h03) , washer(i01) , washer , rod (plate-i07) , flange nut(plate i-08) , stud(plate-j01) , t bolt type vacuum indicator(ispl plate-b03) , snap ring , wrench 10 (tat jd 315se mk-1 p-313 sl no-27) , tubuler spnr 12.5x21 , rod(plate -j01) , wear plate (ctlg plate-i10) , cap screw , adaptor( plate-j07) , hose clamp , rod , spanner 19x22(tool list) , hose clamp t bolt type , washer , accelerator rod , hex nut , rod(plate-j01) , rod , spnr 10x12 (tata jd 315se p-303 sl no-11) , fitting , knob , spanner 24x27mm (ojde) , rubber bellow (upper cooling water line to thermos , o ring(plate-k03) , valve(r2) , rod (plate-i08) , pin assy , adapter (ispl plate-j02) , wrench socket 2 , wire harness park break , union fitting (ispl plate-f05) , support(plate-j01) , adapter(plate-f03) , knob , push rod(r2) , spanner 24x27 mm (ojde) , rod , switch park brake(ms sl-286) , horn , flange nut , clamp (p-15) , tee fitting(p-179) , fitting (plate-j15) , wrench adjustable 305mm , jet assy , bell crank(plate-i08) , cap screw , arm service lock(plate i-06) , spacer(plate-j01) , grip with horn switch knob ctlg plate-j12) , o ring , hyd hose (ispl plate-f03) , spacer (plate-b06) , oil line (p-179) , hose assy , oil line(plate -f01) , spanner open end 18x 19 , hammer 1-1 by 2 , pin (ispl plate-i12) , spanner open end 16x 17 , pin , elbow fitting , elect temp gauge(ctlg plate-h05) , door retainer latch unit (tata jd 315v) , water reservoir , bushing , cabin harness , cutter for exhaust valve seat(smt-32) , knob(plate-j12) , switch pressure-(130psi) (price list tata jd 315v , stay rod lh & rh , hose , dial indicator , hose tank to fuel tank , pin(plate-j15) , pin (ispl plate-k03) , hyd hose (ms sl-314) , gear shaft lever switch assy , hydraulic hose , muffler extention(ispl plate-b04) , hydrolic hose (ispl plate-f01) , shaft seal , base , running disc , pedal lh (plate-j-15) , pedal rh (plate-j-15) , gauge speedometer (ispl plate-h03) , magnetic stand , hose (ispl plate-j04) , lever , knob , interior light (os sl no-407) , bar extension 2 , u ring , lever(plate-07) , tie rod end (ctlg plate-j01) , hose (ispl plate-b06) , digital hour meter (p-344) , wiper motor(ctlg plate-h02) , seal kit (p-347) , knob , tapper roller bearing (p-63) , screw joint coupling 9 by 26 inch (smt-28) , cassette ring (zf ser no 260) , tube , grab sleeve , assy hour meter(r1) , driver , assy tool box , measuring cover , indicator for transmeter , i clutch disk (ispl-old) , insert , handle set for water pump(smt-30) , piston rod s by a(315se mk-1 p-277) , atomiser assy includes 17 , 18 , 19 and 20 (ms sl-67) , steering cylinder (tata jd 315se plate j31) , cutter for 30o(smt-33) , instrument cluster , glass-4 , piston rod s a (315se mk-1 p-293) , wheel stud puller , glass-1 (tata jd 315v) , glass-6 (tata jd 315v) , glass 5(os sl no-347) , bell crank (plate-j-01) , straightedge , high pressure pump super(smt sl-10) , door glass rh & lh , fender l h (tata jd 315v) , fender (r h) (tata jd 315v) , seat(plate-g03) , entrance door(os sl no-335) , track rod , induction coil assy (ispl plate e4 , e6-7) , rear swivel door lh(os sl no-337) , rear swivel door rh(os sl no-338) , bucket tilt ldr cylinder , switch reverse control (ispl plate-c03) , single point ripper(ref-k03) , frame(i14) , wheel rim (hd) , backhoe bucket (0.09 cum)(tata jd mk-1 plate k04) , backhoe bucket(0.18 cum)-ispl plate-k05 , ditch cleaning bucket0.35 cum) , boom lock solenoid(ctlg plate-h02) , crain attachment hb crain , sliding frame(p-177) , converter (alt no from price list-15815) , converter , sliding frame with piston bushing 7 seal , gear box assy(zf p-64)

CTN :40522005 Due date: 19 Jun, 202519 Jun, 2025 NA
Tender For supply of pvc swr bend with oval access door 110mm dia , pvc swr bend plain 110mm dia , pvc swr tee 110mm dia , pvc short connection 300 oblique 450mm long , each shelter should have 01 nos of 500 ltrs hdpe water tanks triple layer , ppr gate valve 32mm outer dia , ppr tank connector inner dia 32 mm , ppr elbow 32mm dia , ppr tee 32mm dia , sealing thread , ppr tee reducer 15x 25 mm inner dia , ppr pipe 20mm outer dia with complete fitting , ppr pipe 32mm outer dia with complete fitting , ppr union 32mm dia , ppr socket 32mm dia , ppr elbow 20mm , ppr socket 20mm , ppr reducer socket 32mm x 20mm , cp bib cock long body chromium plated 15 mm dia , cp pillar tap 15 mm bore , cp stock cock of 15mm bore , vitreous china wash hand basin and white and flat back and size 580 x 400mm including cp waste coupling and pvc waste pipe and complete fixing , bathroom cabinet with looking mirror for toiletry items of size 300mm x 450mm with arrangements to fix the same with wall shall be provided , frp iwc of standard size in three cabins with s oblique p trap shall be provided with flushing cistern , ppr wall clamp dia 25mm , 100mm dia stainless steel grating , ss soap dish holder , silicon tube 200gm , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , fd water heating eqpt solar oblique k oil based with 500 ltr tank capacity and made of 2 mm thick stainless steel sheet grade 304 and ms angle and frame legs of size 40 x 40 x 5 mm thick , cgi sheet 3000mm x 900mm x zero point 60mmconfirming to is 277 , gi pipe 50mm dia and 2400 long , barbed wire 14 swg and 2mm thick , laip 45 x 45 x 6mm and 1830mm long , silicon gun for applying silicon tube , drilling machine portable , mason thread nylon 3mm dia x 100 mtr long roll , adjustable spanner 10 inch , screw driver , self supporting aluminium step ladder 6 feet height , trawal brick 250mm , shovel hand gs 12 feet 1 point 6 kg with fibre handle , measuring tape 5mtr retractable grade ai 16 , hand gloves rubber , 02 x mason to be deployed for 01 month to execute the masonry wks required in the job for timely exec of the wk , 01 x plumber to be deployed for 01 month to execute the plumbing wks required in the job for timely exec of the wk , 01 x electrician to be deployed for 01 month to execute the electrical wks required in the job for timely exec of the wk

CTN :40503233 Due date: 13 Jun, 202513 Jun, 2025 NA
Tender For supply of mill and power turbine spares - 14a sh. no.020 o/p 2500 kw, rotor shaft fitted with moving blades, 1st stage nozzles with locking pieces, 2nd stage and 3rd stage diaphrogm, main shaft thrust coller, hp side laby segments, lp side laby segments, steam laby spring, oil seal holder hp & lp side, oil seal laby spring, rotor front and main bearing (76 mm journal), rotor rear and main bearing (76 mm journal), horizontal faceing stud, ht nut (horizontal face), oil seal bearing (68 mm journal), oil intel fitting, front end thurst bearing, active thurst pad, non active thurst pad holder, active thurst pad holder, non active thurst pad holder, oil seal laby segment hp& lp, oil intel fittings, front end bearing bkt horizontal stud, ht nut 1/2 " bsf, ht nut 3/8" bsf, governor drive shaft, governor drive wheel, governor wt, governor wt carrier, governor wt, governor race carrier, ball bearing b7205, fulcrum pin with washar & split pin, needle bearing 1816, ball bearing -u109/ 629zz, spindle for race carrier, rocker aram, half coupling main pump & governor, main oil pump- 55 gpm, auxillary oil pump- 45 gpm, spring for governor, handle for speed control, rachet for governor, spring for rachet, top spindle for speed control, throttle valve filted with spindle -86/(88mm), throttle valve seat, throttle valve spring, adjustable stud for throttle valve spring, ht nut 1/2 unc, emergency steam stop valve with spindle, half coupling for emergency valve, top spindle, relay piston, relay pilot valve spindle, allen screw, high speed gear pinion shaft, thurst bearing for pinion, plain bearing for pinion, thurst bearing for gear, plain bearing for gear, oil seal holder output shaft, driving end alternator bearing, driver end alternator bearing, alternator shaft pole balancing, driver side active pad, driver side non active pad, high speed coupling, governor terminal (shaft), low speed filxible gear type coupling, spare list for -24z52 mill turbines model-24z52 o/p- 550 hp, ht nut 3/4" bsf, gasket, gasket, lower cage, trip valve cage assembly, pin dowel, valve, pilot trip, screw soc hd cap, lock washer, pin roll, bonnet , trip valve, washer, thrust, shaft trip lever, lever reset, pin cotter, pin reset lever, screw shounder, screw, lever trip, trip valve and case assamble, gasket (116x110x6mm), gasket (127x106x4mm), gasket (104x83x3mm), allen screw (7/8"x1.1/2" bsw, ht stud 3/4"x4", ht stud 3/4"x4", allen screw (3/4"x90mm bsf, mill turbine model - 24zs2, main bearing rotor front end, main bearing rotor rear end, throttle valve seat 2.1/2", throttle valve 2.1/2", throttle valve 2", governor valve steam spindle 5/16", l- gland assembly 5/16", lock nut for l gland, main oil pump 25 gpm, metaflex coupling (high speed), oil filtev element 8gp, stem spindle for throttle valve, crushing spring, z- key valve 0-5 kg/ (small), retaining ring ( horse shoe), main oil pump-25 gpm, governor drive shaft, governor drive wheel (clock wire) no of teeth (27 no), tappet reset spring, stud 3/4"x3" bsf, stud 3/4"x3.1/2" bsf, ht nut 3/4" bsf, stud ht bsf 3/4"x92mm, tappet, tappet with nut, oil reflector (shaft main), thrust bearing 3308 c3, fib - turbine model- 500 mm o/p- 1000 hp, spare list, rotor front end main bearing, rotor rear end main bearing, thrust pad holder active side, thust pad holder non active side, active thrust pad, non active thrust pad, oil seal bearing, front end bearing, 1st stage nozzle (clockwise) with spare and locking pcs, oil intel fitting 19mm, steam laby holder hp side, steam laby holder lp side, steam laby segment hp &cp, laby steam segment spring, oil laby segment spring, throttle valve seat, throttle valve fitted with spindle, pilot valve for relay cylinder, piston for relay, spring for relay, governor spindle, governor drive wheel, governor wt carrier, governor wt, governor wt carrier, race carrier, rocker aram, rocker aram spindle, needle bearing - 1816z, ball bearing 7205, fulcrum pin with split pin and washer, bal

CTN :40474646 Due date: 10 Jun, 202510 Jun, 2025 NA
Tender For supply and fitting of 5 hp dewatering pump set having discharge 20 lps at 10 m head with 3-phase induction motor (crompton / kirloskar /gec (areva) / siemens / abb / jyoti / marathon / bbl make), with complete accessories including suitable inlet & outlet pipe, base plate, coupling foundation bolt, etc. and should be able to give maintenance free service. pump should be dynamically balanced and should have minimum vibrations. it should provide trouble free operation, low maintenance and longer life of the pump. pump will be installed in the pacca pump house at saryu pump canal, stage-ii nanpara, bahraich under modernization project of electrical & mechanical work of saryu pump canal, stage ii & iii, nanpara, bahraich.

CTN :40474647 Due date: 10 Jun, 202510 Jun, 2025 NA
Tender For supply and fitting of 5 hp dewatering pump set having discharge 20 lps at 10 m head with 3-phase induction motor (crompton / kirloskar /gec (areva) / siemens / abb / jyoti / marathon / bbl make), with complete accessories including suitable inlet & outlet pipe, base plate, coupling foundation bolt, etc. and should be able to give maintenance free service. pump should be dynamically balanced and should have minimum vibrations. it should provide trouble free operation, low maintenance and longer life of the pump. pump will be installed in the pacca pump house at saryu pump canal, stage-iii nanpara, bahraich under modernization project of electrical & mechanical work of saryu pump canal, stage ii & iii, nanpara, bahraich.

CTN :40474648 Due date: 10 Jun, 202510 Jun, 2025 NA
Tender For supply and fitting of horizontal coupled type single stage 7.5 hp mud pump set with suitable casing to provide smooth unobstructed flow suitable for coupling with electric motor (crompton / kirloskar /gec (areva) / siemens / abb / jyoti / marathon / bbl make). mud pump sets shall be used for dewatering raw river, slushy water mixed with sand, mud with complete accessories including base plate, coupling foundation bolt, etc. and should be able to give maintenance free service. pump should be dynamically balanced and should have minimum vibrations. it should provide trouble free operation, low maintenance and longer life of the pump. pump will be installed in the pacca pump house of saryu pump canal, stage ii, nanpara, bahraich under modernization project of electrical & mechanical work of saryu pump canal, stage ii & iii, nanpara, bahraich

CTN :40474649 Due date: 10 Jun, 202510 Jun, 2025 NA
Tender For supply and fitting of horizontal coupled type single stage 7.5 hp mud pump set with suitable casing to provide smooth unobstructed flow suitable for coupling with electric motor (crompton / kirloskar /gec (areva) / siemens / abb / jyoti / marathon / bbl make). mud pump sets shall be used for dewatering raw river, slushy water mixed with sand, mud with complete accessories including base plate, coupling foundation bolt, etc. and should be able to give maintenance free service. pump should be dynamically balanced and should have minimum vibrations. it should provide trouble free operation, low maintenance and longer life of the pump. pump will be installed in the pacca pump house of saryu pump canal, stage iii, nanpara, bahraich under modernization project of electrical & mechanical work of saryu pump canal, stage ii & iii, nanpara, bahraich

CTN :40315029 Due date: 31 May, 202531 May, 2025 NA
Tender For corrigendum : supply of fasteners and pipe fittings - aa7242303060-equal elbows galv size 32 , hy7174002943-rivet snap dia 6x20 , hy7242373034- union, mi-galv , hy7242373042-union, , hy7242373077- union,mi-galv , hy7242373085-union,mi-galv , hy7242381029-flat caps, , hy7242381037-flat caps, , hy7242383021-elbow 90 deg, , hy7242383030-elbow 90 deg, , hy7242383048-elbow 90 deg, , hy7242383056- elbow 90 deg, , hy7242383064-elbow,mal iron gal, , hy7242383072-straight elbows 90 , hy7242383080- flat caps, , hy7242385024-tee, mi-galv , hy7242385040-tee, mi-galv size , hy7242385075-elbow 90 deg, mi-galv , hy7242385083-tee, mi-galv size , hy7242386039-3 by 8 inch npt cross , hy7242387078- elbow 45 deg, , hy7242387086-elbow 45 deg, , hy7242388023-elbow 45 deg, , hy7242390028- coupling, mi-galv , hy7242390044-coupling mi cast glvnsd , hy7242390087-coupling, mi-galv , hy7242391040-oh bushing, mi-galv , hy7242392012-sq hd plugs, mi-galv , hy7242392020-sq hd plugs, migalv , hy7242392071-sq hd plugs, mi-galv , hy7242392080-sq hd plugs, mi-galv , hy7242393051- counter sunk plugs, sq. mi-galv , hy7242394015-oh bushing, mi-galv , hy7242394023-oh bushing, mi-galv , hy7242394040-oh bushing, mi-galv , hy7242394058-oh bushing, mi-galv , hy7242394074-oh bushing, mi-galv , hy7242394112-oh bushing, mi-galv , hy7242394163-oh bushing, mi-galv , hy7242394201-oh bushing, mi-galv , hy7242394228-oh bushing, mi-galv , hy7242394260-oh bushing, mi-galv , hy7242580439-cs nipple, 3 by 4 inch npt sch 80 length 50 , oe9751022045-nipple, 3 by 8 inch npt, 75 lg, sch 40, cs , oe9751022053-nipple, 3 by 8 inch npt, 115 lg, sch 40, cs , oe9751022070-nipple, 1 by 4 inch npt, 50 lg, sch 80, cs , oe9751022088-nipple, 3 by 8 inch npt, 50 lg, sch 80, cs , oe9751022150- nipple, 1-1 by 2 inches npt, 75 lg, sch 80 , oe9751022215-nipple, 3 by 8 inch npt, 175 lg, sch 40, cs , oe9751022274-nipple, 1 by 4 inch npt, 100 lg, sch 40, cs , oe9751022347-nipple, 1 by 4 inch npt, 65 lg, sch 40, cs , oe9751022355-nipple, 1-1 by 2 inches npt, 5 inches lg , oe9751022444-nipple, 3 by 8 inch npt, 30 lg, sch 80, cs , oe9751022452-nipple, 1 by 4 inch npt, 30 lg, sch 80, cs , oe9751022460-nipple, 1 by 2 inch npt, 40 lg, sch 80, cs , oe9751022487-nipple, 1-1 by 4 inches npt, 55 lg , oe9751022509-nipple, 1 by 2 inch npt, 50 lg, sch 80, cs , oe9751059011-combinat nipple, 1-1 by 2 inches npt , oe9751060010-female adapter union , oe9751060028-female adapter union , oe9751060079-male union adaptor elbow , oe9751062020-compr. male elbow , oe9751063019-1 by 8 inch no 1610 grease fitting , oe9751063027- grease fitting , oe9751063043-grease fitting , oe9751063051-grease fitting , oe9751063060-relief fitting , oe9751070074-roll pin dia , oe9751070090- roll pin dia , oe9751070201-roll pin , oe9751070228- roll pin dia , oe9751070236-roll pin dia , oe9751094011-air cock
 Loading, Please wait...

Connect us via What's Up