Latest reducing tee Tenders | Government reducing tee Tenders

corporations/Associations/Others

CTN :45726169

15 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of suspension parts - supply of suspension parts, spherlastics bush tvs / wheels india make-meriter620000000063, boltm20x2.5x130, radius rod axle bracket tvs / wheels india make620000001013 / 620/1013 / 620000002198, spherlasticbushtvs / wheels india make-meriter 620000000790s / 620000000790, rubber bellow big tvs make/ wheels india 1r1k-420-300 / w010950m545 / fgw010950m545 / 62000001387, boltm16x2x100 / 625000020069, levelling valve major assy lh277632400129, spherlastic bush tvs / wheels india make-meriter620000000539, anti roll bar assy620000100338 / 620/338, 12" steel clamp pl620000000449, radius rod tvs / wheels india make 620000000982, spring hanger bracket front550732103706, hex nut1 ( m10x1 )12052399015 / m10x1, mr split bush assytvs / wheels india make-meriter620000000704, hanger link assy tvs / wheels india make 620000100337 / 620/100337, screw (m12x1.75x25) 278618999917 / 3901249 / 625000020149, wheel nut m22x2.5257540100110 / 263140100107, camshaft lh288042107901, set screw coller (third arm bolt) 257342106719 / m12800-0200257342108001 / m16x1.5x139 /, u clamp550732504220, compoand link bracket tvs / wheels india make lh 620000000929, steel clamp plate tvs / wheels india make620000000450, ful crum pin288042106701, axle bolt581735608001, u bolt tvs / wheels india make 278032404201 / m24x1.5x378 / 620000001009, ny lock nut for axle stud m12x1.5din934.5 / 12140701201 / 918123110 / l3621218, spacer tube266835608603, parller link support bkt tvs / wheels india make620000061371, parller link bkt lh tvs / wheels india make620000061370, parller link support bkt rh tvs / wheels india make620000061380, bolt m14x1.5x50625000020049, circlip257342104303, rear levevingbkt tvs / wheels india make620000061494, threaded ring266835306501, axle nut12056699023 / m12x1.5din 934.5 / l3021218 / 911123210, coller bolt m16x1.5x182, housing plate (balancing plate)n.p.n, spring hanger bracket550732403710, hex nutm16x1.5 12052396067, 6mm nylone pipe 1mtr tvs / wheels india make620000000286, rubber bush550732807504, male conector tvs / wheels india makem12x1.5 620000001140, circlip cam end288042104302, hard washer tvs / wheels india make625000230029, castle nut m24x1.05din957, coller boltm16x1.5x143 / a01956020-0200, sleeve derlin264142108602, castle nut m12x1.5 / 12102096027, male elbow tvs / wheels india make620000001144, hex nut with collerm16x1.5 550532506501, rubber pad257341307501, rubber connector tvs / wheels india make 620000000287 / 620000000280, screw tvs / wheels india make620000001447, hex screw tvs / wheels india make 625000020179 / m20x2.5x55, rubber bush550732807501, wheel ball w/n w424020071, lock washerc20din7436, spacer ring3223530352, nylock nut (938)m12x1.75, castle nut m18x1.5din937.5 / 257446006502 / 12102801080, rubber cen.bre.honey comb257341307505, castle nut (fr hub check nut) m32x1.05din937.5 / 12102299068 / m32x1.05x941, hex bolt m14x1.5x7011064114621 / m14x1.5x70, castle nutm14x1.5din935 / 12102001409, repair kit for leveling valvetvs / wheels india make620000100205, leveling valvetvs / wheels india make620000100413, hex bolt tvs / wheels india makem16 x 2 x 130mm 625000020078 / 625000020070, hex nylock nut625000140017 / m24x1.5, bump stoptvs / wheels india make620000000639, hanger linktvs / wheels india make620000001474, rubber connectertvs / wheels india make620000100207, nut tvs / wheels india make m16x1.5 625000140040, stud tvs / wheels india make620000000199, bolt hex tvs / wheels india make 625000020119 / m20x2.5x100, parller link lh tvs / wheels india make 620000100029, parller rod assy tvs / wheels india make620000100159, cow horn major assy lh tvs / wheels india make277832400152, cow horn doweltvs / wheels india make 620000000928, shock absorber tvs / wheels india make gabrial/ motherson620000000560, gasket carrier taper pivot w/o spigot tvs / wheels india make257635115302, taper pivot w/o spigot tvs / wheels india make620000000690, m16 spring washer tvs / wheels india make625000230006, boltm10x1.

CTN :45715693

15 Jul, 2026 19.48 Lacs

Muzaffarnagar - Uttar Pradesh

Tender For tender for supply of erection and fabrication work - pan/quad bodies ki kamzor shell ko kaatkar hatana. 10/12 mm moti plate se taiyar kar yathasthan lagana. andar aur bahar se double coat welding kar leak/proof water/vacuum trial dena. , quad evam pan par lage vapour/steam line mein lage 600/1000 mm dia ke right/angle type vapour valves ko dismantle kar valve ki leak/proof marammat karna evam testing uparant punah yathasthan fit karna. , pan/quad ke vapour pipe ke gale/kamzor vapour pipe bends ko naye fabricate karke badalna 600 mm se 1100 mm dia. , quad evam pan ke vapour pipes. vapour/exhaust steam lines ko majbooti pradan karne ke liye angle iron athva plate se t/rings banakar support dena. , vapour cell. semi/kestner. pan va quad bodies ki purani gali steam jackets ko hatakar nikalna. 10/12 mm plate se naya banakar lagana tatha leak/proof trial dena. , pan. quad. vapour shell adi ka fin type cyclone fit karna. naya 8/10 mm plate se banakar fit karna tatha welding kar santoshjanak trial dena. , quad/pans par sthapit vibhinn steam ke gale/kamzor/leaky valves ko kaatkar/kholkar hatana tatha valve ki vanchhit marammat uparant nirdeshanusar fit karna. , air cooled/dry seed/vacuum/twin vertical crystallizer ki drive ke kshatigrast/ghise hue worm wheels ki gland housings ke bush badalne ke liye worm wheel evam worm shaft housings ko dismantle kar alag karna. gland housings mein naye gun metal bush lag jane par housings ki fitting uparant uplabdh karaye gaye worm wheel evam worm housings ko poorv ki bhanti fit kar alignment karna. , vacuum crystallizer ke shell ke gale/kamzor bhagon ko kaatkar hatana. nai/purani plate se shell modkar yathasthan fit karna. andar aur bahar se leak/proof welding karna tatha bahar se vanchhit strengthening karna. , air/water cooled/vacuum/twin vertical crystallizer ke kshatigrast danton wale worm evam worm wheel ko dismantle kar hatana evam unke sthan par naye worm evam worm wheel fit karna. reduction gear evam motor fit karke alignment karna evam trial dena. , pans/crystallizers par lage vibhinn gutters mein se kamzor gutters ko kaatkar hatana. purani plate se banakar lagana. , air/water cooled crystallizers ki purani/kamzor/tooti hui shaft ko dismantle karna. nai shaft taiyar kar yathasthan lagana evam samast arms lagakar santoshjanak trial dena. , air/water cooled crystallizers ki shaft ke gale/kamzor bhag ko kaatkar hatana. m.s. plate se shaft taiyar kar naye pipe ki shaft yathasthan fit karna evam samast arms poorv ki bhanti lagakar santoshjanak trial dena. , crystallizers ki drive shaft ke dono taraf dheele hue/ghise gun metal bush bearings ko nikalna. naye bush fit kar trial dena. , air/water cooled crystallizer ki shaft par lagi kamzor arms ko kaatkar hatana aur m.s. plate/pipe se nai arms fabricate karke shaft par lagakar sucharu trial dena. , air/water cooled crystallizer ke leaky/kamzor gate valve ko repair karke leak/proof fitting karna. , spray hetu sthapit mf 35x35 spray pumps ke elliptical suction pipes mein se gale/kamzor section pipes ko dismantle kar hatana. 8/10 mm moti m.s. plate se sample anusar may strainer fabricate kar yathasthan fit kar leak/proof trial dena. , quad/pans ke condenser mein lage multi/jet spray boxes ki vanchhit marammat karna. , spray pond ke main header. branch header evam branch lines ke gale/kamzor bhagon ko kaatkar nirdeshanusar nai evam purani plate se taiyar kar yathasthan fit kar leak/proof trial dena. , common injection header ke kamzor bhag ko kaatkar hatana. naya fabricate kar yathasthan erection kar leak/proof trial dena. , injection. spray pump ki drive motor ke gale/kamzor resistance box taiyar karna. sabhi internals fit karna. connection kar santoshjanak trial dena. , vertical spray pump ke gale/kamzor base frame ko dismantle karna. poorv ke anusar naya bed fabricate kar level karke yathasthan lagana evam pump fit kar alignment kar dena. , pans ke gale/kamzor feed distribution headers ko kaatkar hatana tatha unke sthan par nirdeshanusar m.s. plate

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

Central Government/Public Sector

CTN :45697300

16 Jul, 2026 20.00 Lacs

Akhnoor - Jammu And Kashmir

Tender For maint of road side lighting works and miscellaneous electrical items under ge n akhnoor. - labour for cutting/pruning of tree branches along security light pole around 2 mtr radius of security light fitting and removing from site including arrangement of t&p (i.e. axe, rope & ladder etc.) complete all as specified and directed., dismantling and taking down street light fittings/post top lantern/down lighter of any wattage/size for repair or replacement of burnt/worn out accessories or carrying to mes store and refixing after repair on required location complete all as directed.note: accessories or components needed for replacement shall be measured and paid separately under appropriate items., repairing of unserviceable led street light any make/model of 90 100 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., repairing of unserviceable led street light any make/model of 60 72 watt capacity by replacing compact led electronic driver suitable to operate on 120 to 270 volt, 50/60 hz ac supply, protection grade ip-66 with surge protection complete all as specified and directed., pvc conduit medium grade of size 15 mm bore including fittings, isi marked, fixing with pcc pole/steel tubular pole/garden lights/gate lights for wiring connection from pole box to light fitting and supporting with 03 nos gi strip clamp, nut & bolt, complete all as specified and directed., replacement of pvc insulated pvc sheathed stranded copper conductor cable 2.5 sqmm twin core complete all as specified and directed., pvc insulation tape of width 18 mm, thickness 0.125 mm, length 25 mtr, isi marked, for proper insulation of joints in wire where required or directed., replacement of aluminium pvc service wire 2 core 6 sqmm flat roll of 90 mtr, superior quality, complete all as specified and directed., disconnecting & dismantling of damaged/unserviceable cable of any type/make and supply & laying in repair/replacement of cable xlpe insulated, screened pvc bedded, galvanized steel strip or wire armoured electric power cables (heavy duty), 1100 volts grade with stranded aluminium conductor using lugs/ferrules at both ends of cable and testing complete all as directed for following sizes:, 10 sqmm 4 crore, 16 sqmm 4 crore, 25 sqmm 3.5 crore, 35 sqmm 3.5 crore, note for item no. 17 & 18: excavation & earth work, sand cushioning, bricks protection & gi pipe where required shall be measured and paid separately., excavation in trenches not exceeding 1.5 mtr width and not exceeding 1.5 mtr depth, getting out for electric cable complete in any type of soil complete all as specified and directed., removing surplus excavated soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above starting point, complete all as specified and directed., returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed., supply and laying sub class b bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed., sand cushioning with ganga sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable) complete all as specified and directed., replacement of 40 mm gi tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor/as garden post including 2 nos mild steel fi clamps 35 3 mm size to support pipe with pole complete all as specified and directed., boring under road horizontally of size 40/50 mm bore using gi pipe for passing of cable in road/path in hard/soft/loose soil complete all as specified and directed., applying two coats of aluminium paint over a coat of red oxide on steel tubular po

Central Government And Public Sector

CTN :45688561

17 Jul, 2026 NA

Narora - Uttar Pradesh

Tender For supply of supply of industrial grade cpvc 90 deg elbow size 1 inch. , supply of industrial grade cpvc ball valve size 2 inch. , supply of industrial grade cpvc blind flange size 2 inch. , supply of industrial grade cpvc cross size 1 desh 1 slash 2 inch. , supply of industrial grade cpvc flange size 2 inch. , supply of industrial grade cpvc reducer coupler size 1 desh 1 slash 2 x 1 inch. , supply of industrial grade cpvc reducer coupler size 2 inch x 1 slash 2 inch. , supply of industrial grade cpvc reducer coupler size 2 inch x 1 inch, as per astm f 439. , supply of industrial grade cpvc reducer coupler size 2 inch x 1 desh 1 slash 2 inch, as per astm f 439. , supply of industrial grade cpvc reducer coupler size 3 inch x 1 desh 2 inch , supply of industrial grade cpvc reducer coupler size 3 inch x 1 desh 1 slash 2 inch , supply of industrial grade cpvc reducer coupler size 4 inch x 2 inch. , supply of industrial grade cpvc reducer coupler size 4 inch x 3 inch. , supply of industrial grade cpvc reducing tee size 1desh 1 slash 2 inch x 1 slash 2 inch. , supply of industrial grade cpvc reducing tee size 3 inch x 1 inch

CTN :45674269

04 Jul, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of health faucet (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , towel rail (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , pvc three layer water storage tank 500 ltrs , wall mixer cp 3 way 15 mm , pvc three layer water storage tank 1000 ltrs , kitchen sink with out drain board , centre hole basin mixture cp 15 mm , pvc low level flushing cistern 10 ltr , western toilet european pattern , kitchen rack stainless steel 36 inch by 24 inch , sink mixture cp 15 mm , pvc pipe 110 mm bore , wc orissa pattern viterous china 450 by 350 mm , bib cock brass 15 mm , glass shelf 6 mm thick with cp railing , ppr pipe 25 mm , hand wash basin viterous china glazed , ppr pipe 20 mm outer diameter , 15mm brass fancy tap cp bib tap 15mm , looking mirror cabinet type 450 by 300 mm , ppr gate valve 20 mm , hydraulic door closer , angle valve , powder coating bib tap , toilet paper holder cp , pvc waste pipe flexible type 32 mm and 600 mm long , urinal pot viterous flat back , pvc bend 110 mm bore , pvc connection pipe 15 by 600 mm , basin mixtuer assembly cp , ppr union 15mm , ppr gate valve 15mm , 15mm brass fancy tap angle valve , ppr union 20 mm , ppr elbow 20 mm , door wall hook rail set peg set 3 pin , plywood bwr 8 ft by 4 ft by 8 mm , stainless steel curtain rails 4mtr each , plywood bwr 8 ft by 4 ft by 4 mm , pvc three layer water storage tank 300 ltrs , lever type flushing cisten single flush system 10 ltr , ppr gate valve 25 mm , elbow gi 15 mm , door stopper aluminium , ppr 25mm tank socket , cp waste coupling 32 mm , tee equal gi 15 mm , helical door spring , pvc shelf 450 by 200 mm , ppr socket 15mm , ppr elbow 15 mm , nipple gi 15 by 100 mm , 2 way bib cock cp , aluminium sliding bolt 250 mm long , socket gi 15 mm , gi bend 15 mm , stop cock cp brass 15 mm , towel ring cp , ppr tank socket 20 mm , plywood bwr 8 ft by 4 ft by 6 mm , union gi 20 mm , pvc connector 110 mm bore , ppr socket 25 mm , bib cock aassembly cp , ms butt hinges 100 mm , door wall hook rail set , ppr socket 20 mm , pvc towel rail 600 mm , looking mirror 5 mm , ppr tank socket 15mm , shower cp 100 mm with rod , pvc soap dish , white cement , flushing handle suitable for 10 ltrs cistern , pvc over head shower with arm , jet spray cp 15 mm , tee gi 15mm , pvc waste coupling 32 mm , aluminium anodised handle 100 mm , excel acrylic emulsion terracoda , ppr pipe 25 mm dia 3 layer with socket , pvc bend for cistern , ppr union socket 50 mm , ppr gate valve 50 mm , tee gi red 20 by 20 by 15mm , pvc stop cock 20 mm , synthetic enamel paint white colour , union gi 15 mm , ppr union socket 25mm , ppr pipe 40 mm dia 3 layer with socket , tee gi 20 mm , socket gi reducer 15 by 20 mm , pvc pillar tap 15 mm , connection pipe wired 600mm , m seal 100 gms , elbow gi 20 mm , teflon tape 19mm , syphon kit for flushing cistern , nails 3 inch 75mm , ppr pipe clamp 20 mm dia , ppr union socket 40 mm , ppr pipe 32 mm dia 3 layer with socket , pvc tee 110 mm , ppr union socket 32 mm , gi union socket 25mm , tank socket gi 15 mm , aluminium barrel tower bolt 75 mm , u clamp 20mm dia , symphon kit for dual flushing cystern , pvc grating round type 140 mm , ppr elbow 90 degree 50mm , aluminium barrel tower bolt 100 mm , glazing putty oil glazed , gi socket 50mm , ppr reducing tee 40 by 25mm , pvc bend 75 mm , tank socket gi 20 mm , gi socket 25 mm , ppr elbow 90 degree 32mm , ppr brass l 20mm , ppr brass t 20mm , ppr t 20mm , ppr union 25 mm , plywood bwr 8 ft by 4 ft by 12 mm , plywood bwr with 3 ply 8 ft by 4 ft by 16 mm , foam sheet 6 ft by 3 ft by 75 mm , plywood bwr 8 ft by 4 ft by 6mm , plywood bwr 8 ft by 4 ft by 3mm , plywood bwr 8 ft by 4 ft by 4mm , plywood bwr 7 ft by 3 ft by 12 mm , foam cushion 530 by 530 mm , prelaminated mdf board 8 ft by 4 ft by 12mm , ply wood commercial one side teak face 9 ft

CTN :45648135

02 Jul, 2026 NA

Bangalore - Karnataka

Tender For tender for supply of straight union , male connector , adjustable elbow with adaptor male , choke fitting elbow , straight union , union elbow , male connector , female branch tee , female branch tee , adjustable elbow with adaptor male , male connector , male connector , male connector , union bulk head female , adjustable elbow with adaptor male , reducing tee female , bulk head union

CTN :45667881

03 Jul, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of with socket , ppr pipe 32mm dia 3 layer with socket , ppr pipe 40mm dia 3 layer with socket , ppr union socket 40mm , thermostat for geyser , ppr pipe 50mm dia 3 layer with socket , ppr reducing tee 50 by 25mm , mcb sp 32a 240 v 10 ka , electronic drivers 15 18 36w for ceiling light , switch socket combination 6 amps 5 pin 230 v flush type , socket outlet 16 amps 5 pin 230 v flush type , ppr union socket 32mm , gi socket 40mm dia , pvc flexible twin core wire copper conductor 230 pt0076 , ppr union socket 25mm , electronic drivers 18 w for batten type fittings , gi elbow medium 50mm dia , pvc casing caping 25 mm width , ppr reducingtee 50 by 40mm , pvc cable with flexible copper conductor 3 core 4 sqmm 1100 volts grade 100 mtr , pvc board 4 inch by 8 inch , ppr reducingtee 50 by 32mm , switch piano type 6 a flush type 230v , switch socket combination multipurpose type 616 amps 5 pin 230 v flush type , ppr tee equal 50mm , gi union socket 25mm dia , pvc board 10inch by 8inch , ppr reducing socket 50 by 40mm , gi tee red med 50 by 25 mm dia , ppr tee equal 40mm , ppr elbow 90 degree 50mm , ppr reducing tee 32 by 25mm , ppr elbow 90 degree 40mm , tape insulation 25mm by 10 mtr , ppr reducing tee 50 by 20mm , tape insulation 15mm by 10 mtr , insulation tape , pvc board 4inch by 7inch , ppr reducing socket 50 by 32mm , switch piano type 16 a flush type 230v , ppr reducing socket 40 by 32mm , ppr reducing socket 40 by 25mm , ppr elbow 90 degree 32mm , ppr reducing tee 40 by 25mm , socket outlet 6 amps 5 pin 230 v flush type , lamp holder batten 2 pin 230 v , ppr reducingtee 32 by 20mm , gi socket 25mm dia , ppr reducing tee 40 by 20mm , plug top 6 amps 230 volts , ppr reducing socket 40 by 20mm , gi socket 50mm dia , ppr reducing tee 25 by 20mm , m seal packet 100 grams , ppr reducing socket 32 by 20mm , ppr elbow 90 degree 25mm with socket , ppr reducing socket 32 by 25mm , ppr reducing socket 25 by 20mm , ppr reducing socket 50 by 25mm ppr gate valve 50 mm, ppr gate valve 32 mm, cable pvc insulated flexible copper frlsh 1 core 2 pt5 sqmm 1100 v, cable pvc insulated flexible copper 1 core frlsh 1 pt5 sqmm 1100 vs, switch socket combination ptytpe 6 amps 5 pin 230 v flush type, switch socket combination ptytpe 616 amps 5 pin 230 v flush type, mcb sp 25 a 240 v 10 ka, pvc board 4 inch by 4 inch, pvc board 4 inch by 7 inch 4inchby8inch, pvc board 10 inch by 12 inch, pvc board 10 inch by 8 inch, tape insulation 15 mm by 10 mtr, cable pvc sheathed insulated aluminium conductor twin core 10 sqmm 1100 volts, led tube light fittings 22 w 230 v, mcb db spn 8 way 230 v double door with 200 amps rated bus bar, mcb db spn 12 way 230 v double door with 200 amps rated bus bar, led tube light fittings 18 watt 230 v polycarbonate type, mcb db spn 2 way 230 v with 200 amps rated aluminium bus bar, led bulb 9 watt b22 type, lt ug cable xlpe 1100 v grade 3 pt5 core 25 sqmm armoured, ppr gate valve 50mm, lt ug cable xlpe 1100 v grade 2 core 10 sqmm armoured, gate valve brass 25 mm, change over switch 100 a 4 pole, cable pvc sheathed insulated aluminium conductor twin core 16 sqmm 1100 volts, lt ug cable xlpe 1100 v grade 3 pt5 core 35 sqmm armoured, ppr gate valve 32mm, cable pvc insulated flexible copper 1 core frlsh multistandard 1 pt5 sqmm 1100 v, cable pvc sheathed insulated aluminium conductor twin core 6 sqmm 1100 volts, cable pvc insulated flexible copper conductor frlsh 1 core 2 pt5 sqmm 1100 v, lt ug cable xlpe 1100 v grade 2 core 16 sqmm armoured, gi //bid details 2 / 83

Central Government/Public Sector

CTN :45657777

14 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of hdpe food-grade pipes , hdpe reducing tee pe 100 pn 10 plain end , hdpe 90 deg bend pe 100 pn 10 plain end , hdpe 45 deg bend pe 100 pn 10 plain end , hdpe equal tee pe 100 pn 10 plain end , 4 inch dia c i air release valve

corporations/Associations/Others

CTN :45661832

02 Jul, 2026 1.87 Lacs

Kolkata - West Bengal

Tender For supply and installation of mechanical items for the tubewell at jogendra garden (wd-107) big-dia tubewell and other 19 nos. big dia tubewell under garfa big-dia t/w unit - chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 100, chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 150, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (i) 100 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (k) 150 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (h) 80 mm dia. (ii) medium quality, building works (f) structural steel works, grills, gates etc. b. repairing 2. welding in m.s. structural work withgas or electric: (b) continuous weld, building works. (u) - additional items : 20) supplying, fitting & fixing different factory made metal craft sheet (excluding cost of metal crafting) incluing cost of powder coating (for m.s, aluminium plate) & finished metal sheet with all fitting accessories complete in allrespect as per diection of engineer-in-charge. a)mild steel plate. i) 2.0mm thick, plumbing works (a)-(ii) g.i. pipe works and fittings 19(i) supplying, fitting and fixing pvc pipes of approved make of schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. tting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. payment for painting will be made seperately) (a) for exposed work pvc pipes (dia) (h)80 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (n) 300 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (l) 200 mm, resting ring : fabrication and supply of protection device (resting ring) made from m.s. iron of size:o.d.10", i.d. 7" thickness 3/4" duly cross supported by 1/2" x 1/2" x 10" m.s. square bars welded firmly at all the ends complete., erection clamp - 4" dia : fabrication & supply of 4" dia erection clamp made from 1/2" x 4?" x 27" m.s. iron flat with making of 4 nos. 5/9" dia bolt holes and supplying of 4 nos. 5/8" dia x 3" long m.s. full thread bolts with nuts and washers., sub total, gst 9 %, gst 9 %, cess 1%

Reducing Tee Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

corporations/Associations/Others