Latest reference pillar Tenders | Government reference pillar Tenders

CTN :41231281

18 Aug, 2025 NA

Begusarai - Bihar

Tender For supply of electronic engineering - 8085 training kit , 8051 training kit , scanning techniques illustrating , stepper motor and 12 v dc motor interface card with motors mounted , 8 bit 8 channel sar adc , communication system trainer channel sampling and reconstruction 4 channel tdm or pam and ppm, pwm experiment panel , communication system trainer 2 channel pulse code modulation pcmor demodulation with frame and bit error detectation and synchronization and correction experiment panel , communication system trainer ask, psk and fsk trainer kit , communication system trainer com plus integrated digicom expt panel psk dpsk, qpsk, dqpsk, 16 qam, dqam, 8 qam, 8 psk, msk, dmsk differential mode and non differential mode , communication system trainer com plus fhss experiment panel , ce, cc and cb trainer kit , rc-coupled ce amplifier trainer kit , triac and scr trainer kit , wienbridge oscillator circuit trainer kit , kelvins double bridge trainer kit, wheatstone bridge trainer kit maxwells bridge trainer kit, hays bridge trainer kit, anderson bridge trainer kit , de sautys bridge, wiens bridge , lvdt kit , strain gauge kit , rtd, thermistor kit , basic electrical trainer kit , maximum power transfer theorem trainer kit , thevenins theorem trainer kit , nortons theorem trainer kit , superposition theorem trainer kit , working cut section of dc shunt machine , working cut section of 3 phase ac induction motor , amplitude modulation demodulation trainer kit , fm trainer kit , trainer kit for fm modulator using ic 566 , trainer kit for fm demodulator using ic 565 , routers , repeaters , hub , switch , connecting cables and connectors , network bridge , null modem cable , variable dc power supply , dual power supply , cro , dso , function generator , digital multimeter , electronic work bench , breadboard , analog ic tester , c.r.o. , function generator , bread board , digital multimeter

CTN :41239480

18 Aug, 2025 NA

Kushinagar - Uttar Pradesh

Tender For construction of cc road, signage, rcc bench in ward no. 03 sant gadge nagar khardar mata temple.

State Government

CTN :41188494

23 Jul, 2025 35.00 Lacs

Multi City - Bihar

Tender For supply, installation, and demonstration of machines, materials, and equipment for electronics engineering lab & electrical engineering lab-, bread board kit, , inbuilt kit containing all cofiguration of bjt(cb,cc, and ce )on one bench, , inbuilt kit containing cd cofiguration of mosfet on, , redimed bench, , scr, triac, , rtd, thermistor kit, , ic tester kit, , package, logic gates, , analog ic tester kit, , resistors, , potentiometer, , capacitors, , ic-555, , iclm32, , connecting wires, , digital ic tester kit, , analog ic tester kit, , smd soldering equipment, , cables/connectors, , maintenance kit, , tools, , screw driver set (set of 5), , passive components, , microwave test bench, , klystron power supply, , microwave test bench, , vswr meter range, , frequency meter, , pin modulator, , synchro transmitter and receiver trainer kit standard, , make, , servo motor ac s and dc, , on-off control c kit, , pi controller kit e, , pd controller kit, , pid controller kit, , plc, , microcontroller trainer kit, , stepper motor, , 7-segment led display, , trainer board, , trainer board, , trainer board, , passive components, , resistor, , variable inductor, , potentiometer, , scr, , thyristor kit, , resistive load, resistiveinducti ve load resistive load, , demonstration kit for demonstrating statically and dynamically induced emf, , demonstration kit to demonstrate self and mutual inductance, , demonstration kit for faraday's laws of electromagnetic induction, , demonstration kit for lenz's law., , demonstration kit for flemings right hand and left hand rules., , passive components: r,l and c, , bread board with hookup wires, , dc ammeter, , dc voltmeter, , dc voltmeter, , ac voltmeter, , ac voltmeter, , ac ammeter, , single phase variac, , moving iron ammeter, , moving coil ammeter, , moving iron voltmeter, , moving coil voltmeter, , digital/energy meter, , potential transformer, , megger, , maxwell bridge, , schering's bridge, , digital voltmeter, , galvanometer, , ippc, , scr, , mosfet, , igbt, , triac, , deac, , charateristics of power mosfet trainer kit, , charateristics of igbt trainer kit, , charateristics of traic trainer kit, , forced commuatation circuit (a,b,c,d and e) trainer kit, , dc servo motor speedtorque characteristics kit, , ac servo motor speedtorque characteristics kit, , ac position control system kit, , dc position trainer kit, , synchro transmitter and receiver kit, , type 1 trainer kit, , type 2 trainer kit, , note: prices sho

State Government

CTN :41177469

28 Jul, 2025 NA

Solapur - Maharashtra

Tender For 1) material purchase for z.p. primary school and anganwadi at wirwade bk., tal- mohol 2) high mast repair in village at wirwade bk., tal- mohol 3) public c.c. seating bench in village at wirwade bk., tal- mohol 4) office material for v.p. at wirwade - 1) material purchase for z.p. primary school and anganwadi at wirwade bk., tal- mohol, official coup board, official table, office chair, dhanya kothya, bhandi rack, wall watch, ceiling fan, shoe stand, cooker, mirror, 2) high mast repair in village at wirwade bk., tal- mohol, 120 watt flud light, 3) public c.c. seating bench in village at wirwade bk., tal- mohol, seating c.c. bench, 4) office material for v.p. at wirwade. bk., tal- mohol, coup board, office chair, 5) material for angnawadi no.4 at wirwade. bk., tal- mohol, patele, bucket, dhanya kothya, zula, lagor, little bycycle, little horse, 6) laptop purchase for v.p. at wirwade bk., tal- mohol, laptop purchase

CTN :41166624

29 Jul, 2025 5.97 Crore

Patna - Bihar

Tender For rrsmp/25-26 pakridayal/05 - dhodhra tola to reo salempur road, setting out pillars :- providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road landclearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i ( by manual means) in area of non-thorny jungle, cutting of trees including cutting of trunks, branches and removal of stumps cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201.7, girth above 300 mm to 600 mm, girth above 600 mm to 900 mm, removal of telephone/electric poles and lines removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per technical specification clause 202., construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kn as per technical specification clause 412, traffic signs, markings & other road appurtenances, kilometre stone, reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703, ordinary kilometer stone (precast), 200 m stone (precast), (i)providing and fixing logo of pmgsy project :-providing and fixing of typical pmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, bo

CTN :41166625

29 Jul, 2025 9.76 Crore

Patna - Bihar

Tender For rrsmp/25-26 pakridayal/03 - bakhri arvind singh ke khalihan to digha pokhar, setting out pillars :- providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road landclearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i ( by manual means) in area of non-thorny jungle, cutting of trees including cutting of trunks, branches and removal of stumps cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201.7, girth above 300 mm to 600 mm, girth above 600 mm to 900 mm, removal of telephone/electric poles and lines removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per technical specification clause 202., construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. (for grading ii material), wmm :- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coat:- providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no.

CTN :41166626

29 Jul, 2025 13.93 Crore

Patna - Bihar

Tender For rrsmp/25-26 pakridayal/01 - construction of road from dulma dalit bastee to dulma chowk via village dulma., setting out pillars :- providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road landclearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i ( by manual means) in area of non-thorny jungle, cutting of trees including cutting of trunks, branches and removal of stumps cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201.7, girth above 300 mm to 600 mm, girth above 600 mm to 900 mm, removal of telephone/electric poles and lines removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per technical specification clause 202., box cutting :- excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, scrarifying existing bituminous surface to a depth of 150 mm and disposal disposal of scrarified materials with a lift upto 3m and lead upto 1000m as per technical specification clause 301.4, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. (for grading ii material), wmm :- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coat:- providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average

CTN :41166627

29 Jul, 2025 13.24 Crore

Patna - Bihar

Tender For rrsmp/25-26 pakridayal/04 - deokuliya phenhara road to bari tola, setting out pillars :- providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road landclearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i ( by manual means) in area of non-thorny jungle, cutting of trees including cutting of trunks, branches and removal of stumps cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201.7, girth above 300 mm to 600 mm, girth above 600 mm to 900 mm, removal of telephone/electric poles and lines removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per technical specification clause 202., box cutting :- excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. (for grading ii material), wmm :- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per technical specification clause 502, tack coat:- providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25-0.30kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with se

CTN :41166634

29 Jul, 2025 3.71 Crore

Patna - Bihar

Tender For rrsmp/25-26 pakridayal/02 - bankatwa bandh to pakridayal tikha road, setting out pillars :- providing & fixing of working benchmark pillars 01 nos. per km & 04 nos. of reference pillars required for 1 km. as per drawings given and direction of e/i, clearing and grubbing road landclearing and grubbing road land ( by manual means) including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees of girth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of e/i ( by manual means) in area of non-thorny jungle, cutting of trees including cutting of trunks, branches and removal of stumps cutting of trees, including cutting of trunks, branches and removal of stumps & roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201.7, girth above 300 mm to 600 mm, girth above 600 mm to 900 mm, removal of telephone/electric poles and lines removal of telephone/electric poles with wires including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and upto a lead of 1000 m and stacking the serviceable and unserviceable material separately as per technical specification clause 202., construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m & 100 m as per technical specification clause 303.1. (including royality & labour cess)., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mounted grader arrangement on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. (for grading ii material), wmm :- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., construction of un-reinforced, plain cement concrete pavement (m35 grade) over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form paver, spread, compacted and finished in a continuous operation including provision of 0.5 x 0.5 panel, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing, laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kn as per technical specification clause 412, traffic signs, markings & other road appurtenances, kilometre stone, reinforced cement concrete m15 grade kilometre stone/local stone of standard

Reference Pillar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government