Latest refilling machine Tenders | Government refilling machine Tenders

Central Government/Public Sector

CTN :44778143

27 May, 2026 NA

Bokaro - Jharkhand

Tender For bid to ras supply of planetary pan mixer of 1000 kg per batch for dry mixing of castables.

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion test apparatus as per is2386 part4 1963 , accelerated curring tank having cap to accom 6 12 18 concr cube 150mm , big size oven electrically operated, thermostatically controlled , bitumen extractor, hand operated, bowl capacity 1500 gms bitumen, supplied , bitumen laboratory mixer including required accessories 20 ltrs , rebar locator , digital compression testing machine , automatic asphalt content meter self recording rain gauge, maximun minimum thermometer digital, screw gauge, prismatic compass with stand, auto/dumpy level with stand and staff, abney level, robotic total station 1 inch accuracy bluetooth auto target, kerosene or gas stove or electric hot plate, ghat tracer, pegging rod, optical square 90 degree, ranging rod 3 mtr long, high precision binacular, temperature gun for checking bituminous surface works, sample tray enamelled, vibrating wire, termperature sensor, portable indicator, steel tape 5m, standard pyconometer of 50 ml, digital hygrometer, post hole auger with extensions, rodo meter - high precision wheel odometer , hot plates 200 mm dia (1500 watt.) voltage 220v to 230v, circular plates of 250 mm dia, sampling pipettes fitted with pressure and suction inlets, 10 ml capacity., sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer, ennore standard sand (25 kgs bag ), weighing machine 0 kg to 10 kgs, mould (15cmx15cmx15cm) for compressive strength of concrete, digital vernier calipers (accuracy 0.001 mm), thermometers mercuryinglass //bid details 2 / 74

CTN :45318826

15 Jun, 2026 40.42 Lacs

Surat - Gujarat

Tender For supply of large pan with lid , medium pan with lid , milk pan with lid , iron pot large , large iron frying pan , frying pan , large iron cauldron , medium cauldron , large bowl with lid , kundi , commander , jug , small steel bucket , large dessert tray , large plate , small plate , medium bowl , hand held ladle , bhatiya , doya , vegetable spoon , kalchhi , 200ml measuring cup for milk , medium steel scraper , rotli scraper , medium size sieve , iron sieve , mixer machine , 30 liter cooker , 20 liter cooker , 10 liter cooker , big dhokla cooker , big pavali , pipe for grains , pipe for mugs , small pip , small steel cans for spices , large iron pan , small pan , small pan for snacks , small pan for tea , strainer for tea , sifter for flour , rice scoop , dal scoop , grain scoop , medium sized steel pan with lid , shovel , sweetie , lighter , roller plate , large tongs , slicer , large grater , small grater , small pan with lid , 500ml measuring cup for oil , rotimaker , dinner set , chapatis , gas stove , rotary grater , hotpot 20 liters , hotpot 25 liters , hotpot 15 liters , hotpot 5 liters , dough maker ) /bid number : gem/2026/b/7532376 * /dated: 25-05-2026 & & / bid document 1 / 51

CTN :45318364

09 Jun, 2026 NA

Bundi - Rajasthan

Tender For supply of large pan with lid , kadhai large , kadhai medium , pressure cooker large , sagda with regulator pipe , sagda for roti with plate , flour kneading machine , kathrot large large plate , garmo for roti , large bowl for vegetables daal with lid , large bowl for rice with grains , masaliyya for storing spices large steel , pipe for storing grains steel two and a half maund capacity , taweta large , taweta medium , rice strainer , spoon large , set of serving spoons , bhatiyu , refrigerator minimum 400 liters , mixer heavy , grinder large , carat for storing vegetables , kitchen rack , patharana , jara set for puri, bundi, sev, fulvadi etc , digital weighing work heavy for kitchen , knife paddle set , velan patlu , waghariyu tava with handle , chini for grating carrots milk , chipiya , jug for water , steel bucket , commercial gas lighter , khandni dasto , service table

CTN :45248078

26 May, 2026 9.81 Lacs

Kozhikode - Kerala

Tender For tender for the supply of hospital items at thiruvananthapuram - e-tender for supply of hospital items at thiruvananthapuramfor more details refer tender documents, dharapathi with stand - single piece & brass work size: l 275cm, w 92cm, thickness 10cm (kunni vaga wood), shirodhara stand with brass work size: h 184 cm (4x4" thickness), shirodhara vessel- bronze with adjustable valve ( 3l), fiber dharapathi size: l 275 x w 92 cm, heavy duty & puff filled (pathi with stand), shirodhara stand with brass work size: h 184 cm (4x4" thickness), shirodhara vessel- bronze with adjustable valve ( 3l), fibre dharapathy -with low stand size: 8 x 2.75ft, steam champer (anjiliwood) sitting type, outer fully wooden and inner fiber lining, hedight adjustable sool, (pressure guage, temperature guage, valve with tube, l111cm x w 73cm h 136cm with granite bottom, step with design - anjiliwood (footstep), stone mortar & pistol (stone), ss single burner stove, induction stove - 1600w, industrial thermometer, digital weighing scale (100 gm - 5kg), surgical instrument tray ss size: 8 x 6", mixer grinder (sujata)/equivalent, lpg gas pipe (1.5m), pressure cooker with outer lid (10l aluminium), steel rack with six panel (180 x 90 x 38), vasti netra - niruha vasti (metalic) - adult, vasti netra - niruha vasti (metalic) - child, disposable vasti netra, anuvasana vasti (metalic) - ss 100ml steel, glycerine syringe, vessel for mixing vasti medicine _ uruli bronze (2ltr), measuring jar (plastic) 100 ml, measuring jar (plastic) 250 ml, measuring jar (plastic) 500ml, sauce pan with lid, arippa (ss), kindi (steel), spoon (medium), spatula (chattukam) steel, gokarnam (brass) 15ml, agnikarma salaka - panchaloham, indalium kadai (5ltr), waste bin large with lid for collecing churna, kizhi, gloves etc, steel charuvam 5l, steel charuvam 3l, idli maker steam cooker (avikkizhi), coconut grater (table top fixing type) - normal type, steel drum with lid and handle (4l), mug (ss) 1l, waste bin (medium), dhuma netra (bronze), avagaha tub with wooden stand size: h50cm x l 168 x w 80cm (150l capacity), steel charuvam (10l), steel charuvam (5l), weighing machine (pocket type), uruli indalium (large) njavara prepartaion (10l), knife (medium), kitchen scissors (medium), soft bed and accessories, t - band (lungotty), thalam- 10" bronze, nilavilakku - 1ft (bronze), kumkuma ceppu (bronze), agarbathi stand (bronze), candle stand (bronze), kora, oil heating bowl with haneld (steel) 200ml, shirovasthi cap leather, nasiwedhan cooker and accessories, vasthi set - griha vasthi, janu vasthi, kati and netra vasthi, facial streamer (plastic), throthu, bowl -bronze, nasya pot (plastic), apron - dispossible

Central Government/Public Sector

CTN :45281601

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For annual sectional contract for repairs & maintenance work and supply of material under aden/ hq-ii /jhs for year 2026-27 a) zone no-2a-2 jhs (railway station & circulating area) b) zone no-2a-3 jhs - stone aggregate (single size): 10 mm nominal size, bitumen emulsion, portland cement (opc-43 grade), white cement, c.p. brass extension nipple (15mm x 50 mm), oxidised mild steel butt hinges 125x65x2.12 mm, oxidised mild steel butt hinges 100x58x1.90 mm, anodised aluminium butt hinges 100x63x3.2, anodised aluminium sliding door bolt 250x16 mm, anodised aluminium tower bolt (barrel type) 200x10 mm, anodised aluminium tower bolt (barrel type) 150x10 mm, anodised aluminium handles 125 mm with plates 175 x 32 mm, satna lime, acrylic distemper 1st quality, haing voc content less than 50 grams/liter, premium plastic acrylic emulsion of interior grade, having voc content less than 50 grams/liter, aluminium paint, synthetic enamel paint in black or chocolate shade, synthetic enamel paint in all shades except black or chocolate shade, coursed sand (zone iii), structural steel such as tees, angles channels and r.s. joists, galvanised steel or l hooks 8 mm dia, bolts and nuts up to 300 mm in length, 18 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c., mirror of superior make glass 60x45 cm, pig lead, gl pipes 15mm dia, gl pipes 20 mm dia, gl pipes 25mm dia, gi union 15mm nominal bore, gi union 20mm nominal bore, gi union 25mm nominal bore, gi union 50mm nominal bore, white plastic seat isolid) with lid c.p. brass hinges and rubber buffers, shower rose c.p. brass for 15 to 20 mm inlet 100 mm dia, shower rose c.p. brass for 15 to 20 mm inlet 150 mm dia, h.p. or l.p. ball valve with polythene floats: 15mm dia, h.p. or lp. ball valve with polythene floats: 20 mm dia, h.p. or lp. ball valve with polythene floats: 25 mm dia, full way valve with c.i. wheel (screwed end) brass 125 mm dia, brass full way valve with c.i. wheel (screwed end) 50 mm dia, vitreous china flat back wash basin 550x400 mm, c.p. brass waste 32 mm, c.p. brass waste 40 mm, vitreous china orrisa type w.c. pan of size 580 mm, vitreous china pedestal type water closet, ply wood 5 ply with commercial ply on both faces 6 mm thick, 12 mm commercial ply, common burnt clay f.p.s (non modular) bricks class designation 7.5, weather sealant -non staining (600 ml), c.i. sluice valve (with caps) class ii: 100 mm dia, c.i. sluice valve (with caps) class ii: 150 mm dia, red oxide zine chromate primer, gp-2 cememtitious compound, galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm, frosted glass sheet of nominal thickness 4 mm (wighting not less than 10kg/sqm), aluminium hanging floor door stopper with twin rubber & stopper, hydraulic door closer tubular type aluminium section body, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, bottle trap, cp brass single lever telephonic wall mixer of approved make, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 75 mm dia, u-pvc pipes (working pressure 4 kg/cm²) single socketed pipe 110 mm dia, upvc bend 87.5° 75 mm bend, upvc bend 87.5° 110 mm bend, c.p. brass bibcock 15 mm, c.p. brass long nose bibcock 15 mm, c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, c.p. brass angle valve 15 mm, binding wire, flushing cistern p.v.c. 10 litre capacity (low level-white) with fittings, accessories and flush pipe, white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556, 15 mm ptmt bib cock, 15 mm dia ptmt stop cock (male thread), ptmt pillar cock, ptmt push cock 15 mm dia, ptmt pillar cock (fancy) 15 mm foam flow, turpentine oil, 15 mm nominal bore and 45 cm length pvc connection pipe with p.t.m.t. nuts, sbr polymer, premium acrylic exterior paint(p.way training center)

CTN :45280751

01 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of desert cooler , blanket , curtains , table cloth , gas chula steel , pressure cooker 3ltrs , karai , tea cup , steel parat small , tawa iron , fry pan steel , kaddukas steel , knife , chakla and belan , steel patila small , potato chillar , tea channi , steel karchi , chimta , small jharna , tea pan steel , plastic mug , gas pipe with regulator , steel palta , sheelvata , milton hotcase , mattress , double bed sheet , pillow , wiper , footmat , mixer grinder with jar , towel stand

CTN :45282069

01 Jun, 2026 NA

Sonitpur - Assam

Tender For supply of reducer t 32 to 20 to 32 mm dia , ppr union 32 mm , tank connector 32 mm , pvc wall clamp 32 mm , pvc wall clamp 20 mm dia , float valve 25 mm , gate valve 32 mm , m seal 150 gm pkt , taplon tape roll , solvent cement 150 gm tube , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , non skid ceramic tiles of size 300mmx300mm on the floor , cp grating 100 mm dia , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend 110 mm dia , p trap , s trap , pvc air pipe 25 mm dia comma length 3 mtr , white cement , vitreous china wash hand basin white of size 450mmx300mm with vitreous china pedestal of suitable size , ppr reducer elbow 32mm x 20mm dia , electric geyser 25 ltr , brass cp wall mixer for mixing hot and cold water screwed down for ppr pipe of dia 20mm , brass chromium plated shower rose 100 mm dia with bend , urinal pot vitreous china bowl urinal pot flat back , pvc t 110 mm dia , brass cp jet water spray with 1 point 2m long flexible tube for ewc , ppr reducer socket 32 to 25mm , ppr plain socket 20 mm dia , ppr elbow 20 mm dia , distribution box 6 way spn comma 240 volts copper bus bar and neutral link , mcb spn 240 volts 32 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty copper conductor of size 1 point 5 sqmm single core , pvc casing capping of size 1 inch medium grade snow white , switch piano 5 amp 230 volts flush type one way snow white , led tube light fittings 20w 230v box type 4 feets with crca body pre coated white and prewired for led tube complete , led mirror lights 1 feet 5 watts , steel screw full thread with rawl plug of 1 1 oblique2 inch size isi marked 100 nos per pkt , pvc switch board snow white size 7 inch x 4 inch for sockets and switches , pvc switch board snow white size 8 inch x 10 inch for main switches db , pvc l bend and t junction joint for pvc casing and capping , service bracket 40mm dia gi tubing medium grade 1 point 5 mtr long , cable pvc insulated electric cables heavy duty aluminum conductor of size 6 sqmm twin core , ceiling rose three terminal snow white , led bulk head fitting high with led lamp 10 watts , pvc flexible wire copper conductor multi stranded 0 point 0016 oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round oblique square block , plastic body fresh air fan with louvers shutter of 200mm sweep , cable pvc insulated elecric cables heavy duty 1100 volts copper conductor of size 4 point 0 sqmm single core , switch socket combination snow white multipurpose 2 in 1 comma 15 amp 230 volts , monoblock pump set single phase capcity 2hp , distribution box 2 way with mcb spn 240 volts 10 amp , pvc flexible suction hose pipe 25mm dia , non return valve nrv metal 25mm dia , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp //bid details 2 / 76 nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without hand

CTN :45057581

27 May, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45280175

11 Jun, 2026 NA

Delhi - Delhi

Tender For supply of portland pozzolana cement 43 grade , stone aggregate 20mm nominal size , coarse sand zone-iii , fine sand , ceramic glazed floor tiles of size 300x300 mm , wall tiles of size 300x300 , vitrified tiles 600x600 mm , unplasticised rigid pvc rain water pipes 110 mm diameter , single tee with door 110x110x110 mm , pvc bend 87.5 degree 110 mm bend , water closet european type wc pan , indian style squatting pan with long pattern , flushing cistern 10 litre capacity - white , water closet european type w.c. pan only seat cover , spendil half turn , cp brass telephonic wall mixer , cp pillar cock , flexible coil shaped pvc waste pipe for sink and wash basin 32mm dia , 600x450 mm beveled edge mirror of superior glass complete with 6 mm thick , ss bottle trap for wash basin and sink , gun metal gate valve 25 mm nominal bore , ball valve brass of 15 mm nominal bore , cp brass shower rose with 15 or 20 mm inlet 150 mm diameter , ptmt long body bib cock , cp angle valve make hindware, periware, cera or equavilant , p.v.c. connection pipe 15 mm nominal bore with 45 cm length , concealed cistern full accessories like giblet, cover, valve, lock in toilet , float glass panes of nominal thickness 4 mm and weight not less than 10 kg per sqm , water proofing compound dr. fixit for seepage , ss towel rail , cp hand held health faucet of toilet , synthetic enamel paint , 30 mm thick pvc door , brass hanging type door stopper 150 mm , p-trap for toilet , solvent , white cement for floor tile , g.i. pipe 15 mm nominal dia , g.i. elbow 15 mm dia , g.i tee for 15 mm nominal dia , g.i. socket , cement based wall putty ) /bid number : gem/2026/b/7566794 * /dated: 21-05-2026 & & / bid document 1 / 37

Refilling Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector