Latest refrigeration valve Tenders | Government refrigeration valve Tenders

CTN :40289846

30 May, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - nut (a1-1-15) , nut m18 plain(jcb super plate xxx i ac) , bolt m18x90(jcb super xxx i ac) , joint water outlet (44tc plate-w) , radiator bottom hose(jcb super xxvii b-17) , de spanner 27x32(jcb super, plate- v11 d) , strut gas door(plate-iv j-1) , tail lamp left side(item no-906) , door seal right hand (jcb super page 95) , fuel pipe fuel filter to fuel pump(ms-174) , fuel pipe feed pump to fuel filter(ms-175) , arm wiper blade assy(item no- 957) , handle door right handle(plate-iv o-9) , hose assy suction(item no - 1202) , light hand lamp 12v , element fuel sediment filter(u v-2162) , bulk head hose(plate-xiii j-2) , secondary element(ispl sl-1904) , gasket for cyl head thickness 1.25(ms-156) , motor wiper linkage assy(plate-1x g-1) , injector assy(vs turbocharged engine)(ms -171) , hose 3 by 4 inch bsp usp 2150mm(plate-xxxi aa-15) , set piston ring 0.50 o s , header for cooler and filter( ms-177) , silencer exhaust box 240x150mm(p-627) , tool pyramide (plate- xxxi aa-21) , tools kit (set of 41items) , bonded washer seal, 1 by 2 inch bsp , bolt plough 3 by 4 inch unf x 23 by 4 inch bs311 type-9(sl-60) , cab base mounting , repair kit , oil seal(ms-183) , pin pivot( ms sl no-4) , hose 1 by 4 inch x 1 by 4 inch bspx520 long , bearing linner( ms-20) , filter engine oil , element suction(jcb 3dx plate b1-2-1 sl no 4) , wiper arm(ms-80) , lock handle with key(ms sl-51) , seal kit (ispl sl no 1513) , filter element , gaiter gear lever , light rear combination lh tail lamp lh (c1-3-11) , element fuel filter 30micron(sl no-xxx c-8) , leaver tipping (plate-vi t-1) , brake piston , seal rear( ms sl no-131e) , bush , plate pressure clutch 6.0mm (ms sl no-212) , seal , kit spider 106.4x43.9 dia(plate-f3-1-1) , rod seal , seal(ms sl-33) , brush carrier assy(ms-192) , v-belt (b-57) , throttle lever & control assy(jcb ispl sl no 806) , seal kit(ms-126) , lead bty positive ( ms sl no- 65) , seal shaft(ms sl no-131g) , brake shoe(ms-187) , thermosted abi(item no-2491) , bearing (h1-1-1 by 13) , filter assy , pressure hose(escou) , fuel maint filter 5 micron jcb 3dx super) , injector(item no-2526) , plate brake counter(ms sl no-144a) , tool kit standard(jcb super) item32 nos qty34 nos , unloader valve with inflator (ispl-97) , kit spider(jcb f1-6-10) , filter fuel assy.(item no-2132) , grease bucket pump , propshaft (p92)(price list-51883) , valve solenoid assembly(ctlg 3dx f5-1-1) , king post carriage(item no-647) , boom assy (jcb 3dx u v) plate b4-4-1 , drive head (item no-1536) , axle steer drive(item no-1521) , decal panel , dowel , spring(ms sl-64) , bolt banjo , rubber hose(plate-l1-4-10) , brush spring(ms-191) , seal,filter cap ( plate no- b1-3-2, sl no- 6a) , horn 12v (plate-c1-12-2) , bty cover (ms-67, jcb u v) , sealing ring ce(ms-190) , relay f r (ms sl-140) , cleaner active wiper(iv r-12,383) , adhesive(iv,r-10) , rh handle , jug oil 200cc , fan belt xpa1280(ispl 4r1040t sl-1 p-79) , oil seal hsg (plate-2h096) , feed pump (side opening)(ms -170) , cable assy throttle controll(ms-96(a)) , water pump assy , pump oil (f5-1-1 e jcb) , roof moulding(plate-iv e-1) , set piston ring 0.75 o s , fuel injection pump vs mico(ms-169) , alternator 12v 65amp(ms-197) , pump hydraulic(jcb super) , radiator aluminium (plate-xxxiii) , backhoe bucket 21 inch wide (ispl plate-k04) , clutch assy , rear axle assy 30 kph , seal kit(ms sl-62) , ignition switch (ispl escou sl no 637) , pressure plate(ms sl-429) , hose suction main hydraulic pump(e2-1-1) , hose , hose 1 by 2 inch x 1 by 2 inch bspx660mm long str , hose(plate-e1-2-1 by 13) , thermostat element(ms-164) , solenoid switch(ms-181) , pivot pin alloy steel(ms sl-18) , fuel filter , lead bty negative (jcb 3dx (u v) ms ser no 66) , rocker arm adjusting screw(ms sl-539) , link track rod (plate-f1-3010) , engine fan-21(jcb super) , alternator(item no-75) , grease bucket pump , kit seal main hyd pump(plate-e2-2-1) , drive assy(4r1040t starter page 70) , armature assy(ms-196) ,

CTN :40359242

22 May, 2025 5.01 Lacs

Ganganagar - Rajasthan

Tender For supply of fire fighting items at ssctps, site store, suratgarh fire bucket 9 liters capacity bucket as per is standard design as per is: 2545 made out of heavy duty g.i. , two way dividing breaching made of light alloy as per is: 5131. , hand controlled branch multi purposes branch (nozzle) the nozzle should be adjustable gallonage with multiple flow settings & 63 mm bim inlet hand nozzle. the nozzle should have selectable flow setting of 115-230-360-475-550 lpm @ 7 bar with flush mode without shut off the nozzle made of pyrolite material, with pistol grip made of zytel and with celcon ball valve. the nozzle shall have feature for straight stream & spray pattern. the length of branch should not , exceed more than 10,5" and weight should not exceed more than 2,5kg, the branch should be simple to operate pattern control (1/4 tum from straight stream to fog). it should have minimum fog angle of 110 and raised lug marks straight stream for limited visibility operations. it should be capable of flushing without shutting down or changing stream patterns. the branch should be nfpa 1964 compliant, fm approved & ce certified, the warranty for branch should minimum five years. be , suction adaptors 100 mm female to 63 mm , instantaneous male, , high range zero torque nozzle specifically designed with ergonomics, handling, control, and reduced firefighter fatigue in mind. in addition, the pistol grip and injet swivel are positioned to eliminate the reaction force torque found in a conventional pistol grip designs. nozzle shall be combination of solid stream and fog nozzle with the capability to flow either stream independently or simultaneously. the solid bore shall have field changeable tips with orifices of either 3/8", ", 5/8", %", 7/8", 15/16", 1", or 11/8" and the fog shall flow. the nozzle shall have spinning teeth, multiple pattern detents, flush without shutting down, twist shutoff of the fog stream, and a full time swivel inlet 2 ", the weight of nozzle not more than 4 kg. the baje shutoff of the smooth bore shall be with dual drive trunnions, the nozzle shall also be constructed of lightweight pyrolite, have a shutoff ball with flow diversion for the fog waterway, have a 05 year warranty and meet nfpa , jet- fog type nozzle, conforming to bs: 336, 63 mm male instantaneous inlet connection, aluminum alloy material with natural finish, operating kg/cm2 pressure-10 , inline foam generator, inlet connection63 mm male instantaneous as per bs 336/is: 903 outlet connection- 63 mm female instantaneous as per bs 336/is: 903, foam induction-3 10 6%, maximum working pressure-10 kg/cm2 , seat washer material neoprene rubber is:937, for hydrant valve , fireman axe as per is: 926, made of forged steel, hardened, and having insulated for fire service use. , fire beater as per is: 8096, made of carbon (mild) steel mesh, and having bamboo handle, suitable for fire-fighting class-a , suction strainer for 100 mm suction hose as per is: 907, , fire hook as per is: 927 with bamboo. , armoured suction hose pipe 100 mm x 4.5 mtr length with gm 100mm male and female round threaded suction hose coupling conforming as per is: 902 , jet-spray shut off type fog nozzle 120 conforming to is:952 63 mm male instantaneous connection, inlet gunmetal material with natural polished, operating pressure-10 kg/cm2 , aluminium foam making branch pipe-fb 5x with g,m 63mm male instantaneous inlet with flow discharge capacity 225 lpm@7kg/cm2 with pvc pickup tube and ss strainer , revolving type branch pipe conforming to is:906 63 mm male instantaneous inlet connection, material gunmetal with natural polished, operating pressure-10 kg/cm2, flow-245 lpm 7kg/cm2 , alloy foam making branch pipe of fb-10x-suitable to discharge 450 lpm@ 7 kg/cm2 (made of aluminium alloy construction) with pvc pick-up tube along with stainless steel dip tube suitable for self-induction , ss 63 mm triple purpose nozzle as per is:2871 , ceramic wool fire blanket white, density-128/m3

Central Government / Public Sector

CTN :39266869

22 May, 2025 2.04 Crore

Jagatsinghapur - Odisha

Tender For bid to ras corrigendum : custom bid for services - pdm1b24334 agency for hydro testing and ibr liaison during repair maintenance schedule testing of boilers hrsg ibr exchanger ibr vessels and other ibr equipment for power plant and other units of refinery during normal operation and shutdown-1) carbon steel piping for hydrocarbon services (with welding electrode e-6010 / e-7018) - units transportation of all piping items from owner's storage points to work site and / or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawing etc., threading, laying, erection and alignment of pipes upto a height of 5 meters on sleepers, pipe racks etc. or upto 5 meters depth in trenches, anchoring wherever required, connecting with equipment, nozzles, steam traps, strainers, orifice assemblies (including tapping upto first block valve), spray nozzles, rotameters; tapping for instrument connections like pressure gauges, thermowells, sample connections, vents, drains etc. including fixing of all types of sw valves, gaskets, nuts and bolts, all inline instruments, elbows, tees, flanges, reducers, full coupling or half coupling, reinforcement pads, earthing strip wherever required; welding prefabricated shoes and supports (including alignment) as per the drawings including preparation of small bore isometrics upto 1.5 inch nb, specifications, codes etc. and as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, flushing wherever required, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge., 2) provision of reinforcement pad (with welding electrode e-6010 / e-7018) transportation from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, gri nding, edge preparation as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, pneumatic testing, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge. 3) extra for ibr grade carbon steel piping joints. for ibr piping jobs, the scope of contractor shall be liasoning with ibr authorities including approval of drawings / documents from ibr authorities and also getting the final approval of the job from ibr authorities including payment of any fee or charges to ibr authorities for this purpose (20% of joints). 4) alloy steel piping (astm a335 gr. p22) units- transportation of all piping items from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawings etc. (alloy steel joints shall be welded by doing root run using tig welding followed by filler passes by manual / semi-automatic arc welding. the job is to be pre-heated prior to welding and all joints to be stress relieved and fully radiographed

CTN :40348438

24 May, 2025 10.12 Lacs

Kheri - Uttar Pradesh

Tender For supply of elbow pipe fitting (q4) , commercial upvc fittings (q3) , pvc end cap (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , commercial cpvc pipe fittings (q3) , steel pipe flanges as per is 6392 (q3)

CTN :40069678

19 May, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of waste pipe,waste pipe,stainless steel shelf rack,towel rail / ring for bathroom,towel rail / ring for bathroom,towel rail / ring for bathroom,plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest),european pattern toilet seat vitreous china,connection pipe with nuts (v2),connection pipe with nuts (v2),connection pipe with nuts (v2),sinks,bathroom or toilet mirror (v2),bathroom or toilet mirror (v2),copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,copper alloy gate valve for waterworks purpose as per is 778,water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703,wire mesh fabric or cloth (v2) as per is 1568,wire mesh fabric or cloth (v2) as per is 1568,sinks / wash basins - vitreous china as per is 2556 (part 4),towel rail / ring for bathroom,towel rail / ri

CTN :40230640

26 May, 2025 NA

Siang - Arunachal Pradesh

Tender For supply of welding rod 8 swg , welding rod 10 swg , welding rod 12 swg , ana bound tube silver colour big , araldite , m seal , flag rod , star box with plate and star , grease nipple big and small , old dhoti , pull and push switch , pop rivets , split pin big and small , strip plastic big medium and small , steel screw 1inch , tubeless puncher kit , dash board polish , body polish , clutch slave cylinder sml , wheel cylinder front and rear sml , wheel cylinder 4by4 sml , fuel filter half ltr capacity sml , water separator sml , fuel filter 01 ltrs capacity sml , oil filter sml , speedometer cable sml , flasher unit sml , regulator handle sml , king pin 4by4 sml , king pin bearing sml , hub oil seal front sml , hub oil seal rear sml , feed pump valve sml , solenoid sml , throttle body m gypsy mpfi , fuel pump motor electric mpfi , wiper blade with arm mpfi , top deck assy mpfi , solenoid mpfi , fan belt radiator mpfi , timing belt tensioner mpfi , diesel filter tata sumo , disc brake tata sumo , brake liner tata sumo , disc rottor tata sumo , rear drum tata sumo , wheel drum tata sumo , calliper pin tata sumo , uj cross tata sumo , clutch cylinder tata sumo , slave cylinder tata sumo , master cylinder major kit tata sumo , clutch slave cylinder tata sumo , fan belt alternator tata sumo , power steering belt tata sumo , return pipe set tata sumo , suspension bush kit tata sumo , glow unit tata sumo 4by4 , turbo core tata sumo 4x4 , self starter tata sumo 4x4 , heater plug tata sumo 4by4 , upper lower arm l r with bush fitted tata sumo 4by4 , combination switch assy tata sumo 4by4 , centre bolt tata sumo 4by4 , yoke and teeth tata sumo 4by4 , rear brake shoe adjuster complete tata sumo 4by4 , wheel cylinder rear tata sumo 4by4 , hand brake cable tata sumo 4by4 , speedometer wire 4by4 tata sumo 4by4 , diesel filter assy half ltrs tata sumo 4by4 , oil filter tata sumo 4by4 , oil filter tata 1510 lp bus , oil seal inner outer tata 1510 lp bus , oil seal outer rear tata 1510 lp bus , oil filter tata 1613 tc 42 tk , water separator tata 1613 tc 42 tk , shackle pin front with nipple tata 1613 tc 42 tk , shackle pin rear with nipple tata 1613 tc 42 tk , silencer packing tata 1613 tc 42 tk , feed pump tata 1613 tc 42 tk , feed pump valve kit tata 1613 tc 42 tk , safety triangular tata 1212 tc 42 tk , fuel filter water separator tata 1212 tc 42 tk , odometer assy tata 1212 tc 42 tk , master cylinder with booster mandm scorpio , front wheel hub bearing m and m scorpio , brake disc pad m and m scorpio , brake shoe bearing m and m scorpio , wheel rim alloy wheel m and m scorpio , wheel stud with nut m and m scorpio , helmet bid details/ 2 / 70

CTN :40062284

21 May, 2025 5.00 Crore

Jodhpur - Rajasthan

Tender For supply of cardiology implants and equipmets, high pressure lineavailable in 150cm and 200cm, made of branded pvc, very flexibleand pressure should hold up to 1200psi with leur lock on one side and collerfillting on other side., radial introducer needle 18g, 32mm length, inner diameter 1.3mm, braided long sheath*atraumatic tip for carotid & distal procedures*hemostatic valves to prevent back leak and air aspiration.with tbv detachable valve for thrombus management *gold coil marker for distal visibility, distal hydrophilic coating *ptfe coating seamless device transition* available in diameter 6,7,8 f and length 45cm,65cm & 90cm.* with suture eye for securing sheath.nylon out layer with stainless steel coil * with internal side port with attached 3 way stopcock., radial artery haemostasis device- (t.r. band) consists of two balloons specially designed for spot compression of the radial puncture site. must have belt magic tape for fast application. must have curved support plate. must have green positioning marker. must be available in 2 sizes 24cm and 29cm usfda/pmda approved, hydrophilic guidewire with mcoat technology tapered tip, (regular length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032, .038, .025, .018 diameter and 150 cm, 180 cm length - straight / angled / 1.5 mm j shape usfda approved, hydrophilic guidewire with mcoat technology tapered tip, (exchange length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032,.035, .038, .025, .018 diameter and 260 cm length - straight / angled / 1.5 mm j shape usfda approved, hydrophilic guidewire with mcoat technology tapered tip, (regular length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032, .038, .025, .018 diameter and 150 cm, 180 cm length - straight / angled / 1.5 mm j shape pmda approved, hydrophilic guidewire with mcoat technology tapered tip, (exchange length) single nitinol core alloy, tungsten-infused polyurethane jacket hydrophilic polymer coat.one piece construction & radiopaque polyurethane jacket. must be available in standard and stiff. must be available in .032,.035, .038, .025, .018 diameter and 260 cm length - straight / angled / 1.5 mm j shape pmda approved, baby j wire (180 cm) with radius of 1.5mm j tip, (regular length) must have tungsten-infused polyurethane jacket. baby j curve must have radius of 1.5 mm. super elastic nitinol alloy, m coat hydrophilic coat, one piece construction for 1:1 torque & radiopaque polyurethane jacket. usfda/pmda approved, baby j wire (300 cm) with radius of 1.5mm j tip, (exchange length) must have tungsten-infused polyurethane jacket. baby j curve must have radius of 1.5 mm. super elastic nitinol alloy, m coat hydrophilic coat, one piece construction for 1:1 torque & radiopaque polyurethane jacket. usfda/pmda approved, guide wire hydrophillic coated 0.0 32x150 cm polyurathane jacket.glider torque devices. super elastic nitinol core. eurepean ce, special slender sheath (gss) for trans radial rootmust have unique thin wall technology reducing the outer diameter by 1 fr size whilst maintaining the one size lager inner diameter. must have 7fr sheath with outer diameter of 2.8mm, 6fr with od of 2.46 mm & 5fr with od of 2.13mm. hydrophilic m coating with 20/21g surflash needle and tif tip technology which provide optimal tapering design.usfda/pmda approved, radial sheath with puncture needlestandard length includesurflash 20g*2 entry needle (plastic iv catheter) and 0.025 mini plastic guidewire.radial introducer

Refrigeration Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector