Latest refueling system Tenders | Government refueling system Tenders

State Government

CTN :43204938

24 Dec, 2025 10.21 Lacs

Pathanamthitta - Kerala

Tender For state plan-2025-26- uwss to pathanamthitta-state plan 2025-26- supply , erection and commissioning of centrifugal pump set at anchakkala booster pump house-general electrical work

State Government

CTN :43204947

29 Dec, 2025 7.98 Lacs

Kozhikode - Kerala

Tender For operation and maintenance water supply schemes electrical mace of old and new pump house at kozhikode medical college

State Government

CTN :42779169

23 Dec, 2025 31.11 Lacs

Mumbai - Maharashtra

Tender For corrigendum : three years annual rate contract for supply of spares and consumable items for electrical and mechanical division - three years annual rate contract for supply of spares & consumable items for e&m division, direct mounting pressure gauge 0-10 bar, danfoss differential pressure switch (range 0.2-7.5 bar), indfos differential pressure switch (range 1-10 bar), 22 kg co2 high pressure hose with horn, discharge pipe of abc fire extinguisher, insulation tape (black), teflon tape, rubber gasket sheet 3mm, taps for water purifier, notifier smoke detector fapt-851, notifier manual call point f-mcp-glass, notifier monitor module fmm-1, notifier control module fcm-1, notifier relay module frm-1, notifier fault isolator module iso-x, flasher cum hooter sys-hs, ravel photo & heat multi detector (model.re316sh-2l), float switch 230vac, ip67 with 5-meter inbuilt cable, 2.5 sq mm frls copper wire (r,g,b- 300 mtr each), 4 sq mm frls copper wire (r,g,b- 300 mtr each), 2.5 sq mm frls 3 core copper cable, polish paper (sand paper 120), spray paint (silver,black & red), duracell aa 1.5 volt cell, duracell aaa 1.5 volt cell, digital astronomical timer, digital timer, pin type lug 2.5 sq mm, pin type lug 6 sq mm, pin type lug 1.5 sq mm, ring type lug 6 sq mm, ring type lug 10 sq mm, ring type lug 25 sq mm, ring type lug 4 sq mm, kirloskar foot valve - 150mm spring type, kirloskar foot valve - 80mm spring type, kirloskar foot valve- 65mm spring type, kirloskar foot valve- 100mm spring type, kirloskar foot valve- 75mm spring type, kirloskar foot valve- 40mm spring type, nut & bolt with washer - size m6*20mm, nut & bolt with washer - size m8*20mm, nut & bolt with washer - size m10*30mm, nut & bolt with washer - size m12*50mm, silicon sealant cartridge, drill bit set (hss)- set of 13 bits, concrete drill bit set- set of 5 bits, cable tie 150mm, cable tie 250mm, ceiling fan capacitor 2.5 micro f., exhaust fan capacitor 2 micro f., grinding & cutting wheel 107x1x16mm for ag4 grinding machine, electrical insulated gloves full palm rubberization -1000v resistance non-slip, htc smps-3005 0-30 v, (0-5 a) dc regulated power supply, mk one module blank plate, schneider 6/16 amp modular socket, schneider 6/16 amp modular switch, legrand 6/16 amp modular socket, legrand 6/16 amp modular switch, mk 6/16 amp modular socket, mk 6/16 amp modular switch, 3 module surface box, 3 module modular plate, 1 mm frlsh wire (red), tds meter- isi mark, ip68 (+-0% tolerance), taparia line tester, portable digital weighing machine (150kg), flex quick instant adhesive, 3m double tape (2 mm thick with width 25 mm & length 10 mtr), heavy duty pipe wrench (315 millimetre), pressure gauge with hose, air charging 230volt electric pump (200 psi), dol starter 5hp, gemtax v-belt- no-a1484 lp a/57 belt (for polyhouse fan), gemtax v-belt- no-a1814 lp /a70 belt (for polyhouse fan), gemtax v-belt- no-a76 belt (for polyhouse fan), raval plug 35mm, philips choke for ip 20,33-watt lights, philips 33w light fittings 1 feet x 4 feet, kirloskar nrv 40mm, flg std- bs10d, body ms, disc cs, seat nbr, class pn16, kirloskar nrv 65mm, flg std- bs10d, body ms, disc cs, seat nbr, class pn17, chain wrench 150mm, brush cutter wire (round shape), led 50w driver, input 100-300 vac, output dc56-75v, led 30w driver, input 100-300 vac, output dc30-56v

Central Government/Public Sector

CTN :43207831

07 Jan, 2026 40.90 Lacs

Sonitpur - Assam

Tender For providing of operation and maintenance of electro-mechanical installations - annual maintenance contract(amc) for internal and external electrical installation and operation of dg sets & pump in neriwalm campus at dolabari, tezpur, assam (pin-784027)

State Government

CTN :43205536

26 Dec, 2025 8.20 Crore

Chitradurga - Karnataka

Tender For survey, investigation, design, supply, installation , testing etc., for filling water to thumbigere tank, katanayakanhalli hosahalli tank, lingapura tank and rudranakatte tank from rampura halla near rampura village in davanagere taluk, davanagere district. including commissioning of entire scheme comprising of head works manifold chambers, construction of intake arrangements, jack well cum pump house, consruction of check dam for storage of water, pumping machinery, di rising main pipeline and hdpe netwroking line, gravity main network, delivery chamber,canal crossing, road crossing, railway crossing / high way crossing by pipe jacking/horizontal drilling method, surge analysis and 11kva electrical sub-station with express feeder line, land acquisition, crop compensation statutory charges towards depatmental approvals, utility shifting of water supply and power supply line, gravity irrigation of minimum 80 hectares of irrigatting land in thumbigere village by construction ridge cistern, including operation and maintance for a period of 5 (five years) after successfully commissioning of the scheme, on lumpsum and turn key basis

State Government

CTN :43208716

22 Dec, 2025 7.92 Lacs

Delhi - Delhi

Tender For maintenance of electrical installation , fans, repair maintenance of a/c equipment, pump set at bungalow of senior officers , ministers residence at tilak marg, daryaganj, chanakya puri , nearby areas new delhi (sh- providing and fixing of led light fittings).

State Government

CTN :43204049

26 Dec, 2025 4.95 Lacs

Kutch - Gujarat

Tender For supply of routine maintenance items crimping type non-insulated copper pin type terminal end 25 sq.mm , crimping type non-insulated copper pin type terminal end 35 sq.mm , crimping type non-insulated copper pin type terminal end 50 sq.mm , 300 sqmm crimping alluminium type in-line connectors , 240 sq mm crimping type alluminium in-line connector , 185 sqmm crimping alluminium type in-line connectors cat no :hai-11 hex make , aluminium tube terminals185.0 mm2, m10 , aluminium in line connector 70 mm2 , aluminium in line connector120 mm2 , 35mm alluminium in line connector als-2"dowell" , heat shrinkable sleeve for lighting wiring , heat shrinkable , sleeve, size:45mm/18 mm(for 240/300 sq.mm)for 11 kv , 1.1 kv busbar/cable couductor protection heat shrinkable sleeve dia before shrink: 50 mm dia. after shrink: 16 mm for 1.1 kv lt cable , double pole mcb-2a , mcb/dp, 6a , indication lamp , mcb dp 16a ac, c-curve, csmbs2c16 , mcb dp 10a ac, c-curve csmbs2c10 , gls lamp 500 w screw type , plastic dori (sutari) for binding of plastic 0.5 thick &2mm width. , to make panelspare handle cssdf200a-400amp (cswh 145 s 12) , thinner for enamel paint. (tin of 1 ltr.) , multi functional fluid spray oks-601 , carbon cleaner spray , painting brush size 3" (75 mm) , painting brush size-38 mm , wire brush size 12" with wooden handle , washing powder (1 kg pack) , pvc buckets-15ltr , schneider , telemechanique/merlin gerin , make-push button for 22.5 panel , cutout with contact elementtype of contact , :nocolour: yellowreferance , no.:xb5-aa51ntype:spring return , push buttons , oks 2621 safe l.c. spray, contact cleaner spray for live circuits ( 500 ml spray bottel) , flat cable 3 corex4 sqmm with copper conductor for submersible motor , pvc insulated, unsheathed flexible copper cable size 1 core x 2.5 sq. mm, 1100 v grade , auxiliary relay re-300 coil voltage 250v dc , jyoti make re-300 plug in type relay, coil voltage 240 v,50hz ac with led indication & 4 change over contact having 10 amp rating. , tubular spanner set (8 pcs) product no ts 08 taparia make , bimetal mini hole saw cutter complete with arbor, product no- hsm 12, size-12 mm. , bimetal mini hole saw cutter complete with arbor, product no-hsm 19, size-19 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 22, size-22 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 29, size-29 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 35, size-35 mm , bimetal mini hole saw cutter complete with arbor, product no- hsm 44, size-44 mm , oil barrel hand pump , electrical hand blower 800 watt, 230 volt, 50hz , hand grinder machine. , #w963 play safe high voltage tape (25 mm x 0.76 mm x 9.1 mtr) roll , w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll , control transformer, 440v/240v, 250va , on/off selector switch, model: s16-61002-b03, ac23a-10hp make: salzer , on/off selector switch, model: s6-61002-b13, ac21a-440v-6a make: salzer , voltmeter selector switch, model: s10-61100-b13, ac23a-4hp, 440v ac make: salzer , bus selection selector switch, model: s6-61038-b13, ac23a - 3 hp make: salzer , voltmeter selector switch, 6a-vss-b13, ac21a, 440v, 6a make: salzer , local/remote selector switch, model: d16-61040-b63 3.16a, dc22a, l/r=2 m.sec, make: salzer , ammeter selector switch part code-6a-s6-61325-b13-tdyr make -salzer , stanvac pen oil rust remover 6030,500 ml/pac , #901 easyclean (nf) 500 ml. spray canon line electrical contact cleaner.

State Government

CTN :43205492

15 Jan, 2026 35.64 Crore

Shikaripura - Karnataka

Tender For survey, investigation, design, supply, erection, testing and commissioning of tank filling scheme for filling 32numbers of mi/zp tanks of gudavi(head works consisting of construction of barrage, in take trough with forebay, jack well cum pump house, vertical turbine pumps coupled to motors, pump house electrical works, necessary valves, delivery pipe, manifold system, electrical panel, soft strater, capacitors, 11kv transformer, 11/0.433 kv sub station, 11 kv power line and 11 kv terminal bay, rising main, pressure distribution) in soraba taluk by lifting water from varada river near gudavi village including operation & maintenance for a period of five years after successful commissioning of the work for gudavi tank filling scheme works on turnkey basis

Central Government / Public Sector

CTN :43162417

05 Jan, 2026 46.27 Lacs

Guntapalli - Andhra Pradesh

Tender For providing of custom bid for services - outsourcing of pump house operations on a 24x7 basis at krb & glr pumphouses and maintenance of electrical assets at railway colony, wagon workshop, guntupalli, s c railway for a period of 365 days

State Government

CTN :43211207

30 Dec, 2025 38.51 Lacs

Chhota Udaipur - Gujarat

Tender For comprehensive operation & maintenance of civil & electromechanical assets such as elevated service reservoirs (e.s.r), hglr, sump, water treatment plant, chemical house, staff quarters, pump house,all bulk transmission and distribution pipelines, valves, pumping machinery & electrical equipment etc. for the sankheda bodeli pavi regional water supply scheme based on bhilodiya branch canal, including supply of 7.16 mld potable water to all the 46 villages/05 hamlates/18 narmda vasahat for 04 months period. taluka: sankheda, bodeli, pavijetpur district: chhotaudepur based on bhilodiya branch canal. including supply of pac solution , bleaching powder and chlorine gas etc. completed for three months (04 months) o&m (c+m)

Refueling System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors