Latest reheater Tenders | Government reheater Tenders

Central Government And Public Sector

CTN :45499235

02 Jul, 2026 NA

Kaiga - Karnataka

Tender For supply of seal cooler for reheater drain pump (rdp) as per drawing no. 2h-90688, oem item code 86984hanhexr.

State Government

CTN :45476585

08 Jun, 2026 NA

Multi City - Telangana

Tender For supply of rotork make electrical actuator spares for boiler vents, drains, fan outlet dampers and reheater spray station of units-9 and 10

corporations/Associations/Others

CTN :45237118

10 Jun, 2026 34.11 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of tubular protector for spacer tube , size l-1000mm , id-55 mm , tubular protector for rear w.w. screen tube , size l-1500mm , id-55mm , tubular protector for final s.h. tube , size l-1000mm , id-55mm , tubular protector for tertiary super heater & reheater size 1500x58.0x4.0 mm , tubular protector for tertiary s.h. tube , size l-1000mm , id-57mm , u clamp of size id-57 mm , u clamp of size id-63mm , tubular protector for economizer & primary s.h. vertical tube , size l-1000mm , id-52mm , tubular protector for economizer & primary s.h. vertical tube , size l-1500mm , u clamp of size id-53mm , tubular protector for pri. s.h. tube , size l-1500mm , id-45mm , u clamp for ash protector of primary sh horizontal size id-45 mm , tubular protector for sec. & ter. rh coil , size l-1500mm , id-64mm , u clamp of size id-65 mm , width 40mm , th.-4.0mm , 90 degree bend tubular shield for primary super heater horizontal size id-45.5 mm , reverse 90 deg bend ash protector for primary sh horizontal size id-45.5 mm , semi circular protector for spacer tube 60 deg bend size-1500x65x4 mm

Central Government/Public Sector

CTN :45417377

09 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of final reheater innermost u bends for stage 2 at ntpc barh

corporations/Associations/Others

CTN :45406878

17 Jun, 2026 41.50 Lacs

Kasimpur - Uttar Pradesh

Tender For supply of boq for biasing damper b b - articulated arm of flue gas biasing dampers for superheater , articulated arm of flue gas biasing dampers for reheater , bearing of flue gas biasing dampers for reheater , lid bearing of flue gas biasing dampers for reheater , lid bearing of flue gas biasing dampers for superheater , stuffing box flue gas biasing dampers for reheater , stuffing box of flue gas biasing dampers for superheater , bearing of flue gas biasing dampers for superheater

Central Government/Public Sector

CTN :45380546

24 Jun, 2026 NA

Koraput - Odisha

Tender For supply of silicon carbide heaters - silicon carbide heating element type- alpha rod(alpha ultra non joint single piece) dia- 22mm(+/-1mm) overall length- 1300mm (+/-5mm) hot zone length- 650mm (+/-3mm) (middle section) nominal resistance- 1.2 ohms +/-20% min. density- 2 gram/cubic cm porosity- 10-15 % (along with 2 nos spring steel h clamps and 1ft braid per element) make-silcarb , silicon carbide heating element type- u-type(alpha ultra non-joint single piece) heater dia- 32mm no. of shanks- 2 nos hot zone length- 1100mm(+/-5mm) cold zone length- 450mm(+/-5mm) overall length- 1594(+/-6mm) distance between shanks(centre to centre)- 85mm(+/-1mm) distance between shank(end to end)- 117mm(+/-1mm) max temperature- 1400 degree. c power reqiuirement- 12kw nominal resistance at 1000 degree c 2.5 ohms(+/-20 %) min.density- 2 gram/cubic cm porosity- 10-15 % (along with 2 nos. of spring steel h clamps and 2 ft braid per element) make-silcarb , silicon carbide heating element type- alpha rod(alpha ultra non joint single piece rod) heater dia- 38mm(+/-1mm) hot zone length- 1450mm(+/-5mm) cold zone length- 400mm(+/-5mm) overall length- 2250mm(+/-5mm) maximum temperature- 1300 degree c power requirement- 15kw(approx) nominal resistance at 1000 degree centigrade 1.20+/-20 % ohms min. density- 2 gram/cubic cm porosity- 10-15 % along with 2 nos. of spring steel h clamps and 2 ft braid per element make-silcarb , silicon carbide heater type- alpha rod(alpha rod ultra non joint single piece) heater dia- 44mm(+/-1mm) hot zone length- as per the drawing enclosed cold zone length- as per the drawing enclosed nominal resistance- 0.748(+/-20%)ohm minimum density- 2 grams/cub. cm porosity-(10-15)% supplied with 2 nos. of spring steel h clamp & 2ft braid per element make-silcarb , silicon carbide heating element type- alpha rod(alpha ultra non joint single piece rod) heater dia- 31mm(+/-1mm) overall length- 1600mm(+/-5mm) hot zone length- 800mm(+/-3mm)(middle section) nominal resistance- 1.2 ohms(+/-20%) minimum density- 2 gram/cub. cm porosity- 10-15 % (along with 2 nos spring steel h clamps and 1ft braid per element) make- silcarb , heating element furnace spare parts(u-shaped alpha ultra rod 44 x 960x1450 mm) silcarb make silicon carbide heating element alpha ultra non joint u-shaped heater with special oxide glaze with 2 shank system suitable for silcarb make brazing furnace no.-1784 tolerance- dia(+/-)2mm hot zone(+/-)3mm total length(+/-)5mmresistance(+/-)20% make-silcarb

State Government

CTN :45341489

10 Jun, 2026 NA

Chandrapur - Maharashtra

Tender For work of repair/servicing of cci make superheater & reheater spray control valves & prds spray control valves in bhel boiler of unit no.3 during coh at cstps, chandrapur.

Central Government And Public Sector

CTN :45290162

15 Jun, 2026 18.38 Lacs

Kalpakkam - Tamil Nadu

Tender For procurement fabrication and supply of off gas reheater shell and tube heat exchangers for the off gas system at karp and karp-ii

Central Government/Public Sector

CTN :45134697

01 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For corrigendum : fabrication and supply of pressure parts with bhel materials (osb) for various projects and transportation of finished goods to respective project sites. - raichur economizer (support plate & collector support) , anpara economizer (support plate & collector support) , ukai economizer (support plate & collector support) , dvc mejia economizer (strap support) , ukai lt super heater (strap support) , bokaro economizer (strap support) , bakreswar reheater , muzaffarpur reheater , korba reheater , dvc chandrapura economizer (panto plate support) , slpp evaporater , barsingsar pot panel , anpara straight panel with wear bar welding

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

Reheater Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors