Web Analytics Made Easy - StatCounter

Reinforcement Steel Tenders

Get complete information related to latest Reinforcement Steel Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Reinforcement Steel Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Reinforcement Steel Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :41236713 Due date: 11 Aug, 202511 Aug, 2025 10.00 Lacs
Tender For purchase of nirman samagri - purchase of construction material, cement isi marka (50kg bag) pqc, brick (gutka eet) local, stone sand, fine sand (balu ret), crushed stone aggregate 10 mm, crushed stone aggregate 20 mm, cement (fly ash) bricks (10x10x20 cm), flag stone (farshi) 40 mm, reinforcement steel rod 8 mm, reinforcement steel rod 10 mm, reinforcement steel rod 12 mm, reinforcement steel rod 16 mm, winding wire (centering) 18 gaje, wire fancing/mash with angle span 2 meter complete instalation (1x1 inch jali), wire mash chainlink with angle span 2 meter complete instalation (3x3 inch jali), np2 rcc pipe 300mm, np2 rcc pipe 400mm, np2 rcc pipe 600mm, np2 rcc pipe 800mm, np3 rcc pipe 1000mm, flat back urinal basin 340x410x265 mm with installation accesries, pvc-u pipes (110 mm dia od), steel work work complete with priming coat, tree guard (dia 1.5 feet) hight 4 fit, plastic paint asian paint brand, paint for steel work asian paint brand, paint for wood work asian paint brand, distempar

CTN :41177161 Due date: 31 Jul, 202531 Jul, 2025 18.00 Lacs
Tender For bid supply of furniture in chief medical and health and ms dhs bharatpur - item with specification, doctor s chairrevolwing chair low back cushion seat and back with hydraulic system, push back and pu arms steel base with wheels, doctor s tablewooden office table made of mdf board with one side three drawers, size 48"x30"x30", patient stoolrevolwing stool m.s. tubular four legs fitted with fvc stums, 15" to 27" adjustable height s.s. top throught screw system, pre-treated and eproxy powder coated, executive chairthree seater waiting chair handling capacity 325-350 kg weight. size: 70x23x31 inches color shining silver] meterial: mild steel, finish; chromes, attendant chairvisitor chair cushion seat and back with pu arms made of 16 gauge ms pipe, seat and back sise 18"x18", examination tableexamination table (2 section) overall size: 1800x500x800 mm, frame works of crs tubes, adjusted backrest of ratchet, pre-treated and epoxy powder coated, foot stepfoot steps double made of 16 gauge pipe and 20 gauge sheet, almirah/cupboardalmirah size: 78x36x19, made of 22 gauge sheet with five compartment, spray paint finish, staff tablesteel staff table made of 16 gauge pipe and 22 gauge sheet one side three drawers and other side one cabinet and plt top fitted, sise: 60x36x30 inches, water coolerjumbo size (heavy fiber body), ceilling fan 48 inch, curtains (4x5 window)curtains including installation with pipe/brackets/supports (all ss), curtains (4x7 doors)curtains including installation with pipe/brackets/supports (all ss), curtains (4x9 doors)curtains including installation with pipe/brackets/supports (all ss)

CTN :41166609 Due date: 28 Jul, 202528 Jul, 2025 16.49 Crore
Tender For mgsy/25-26/ kahalgaon /02 - construction of h.l. bridge at dobhi ghat on gerua river on khiridanr to makanpur road, block- sanhaula, foundation, excavation for structures, earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material., providing and constructing temporary island 16 m diameter for construction of well foundation for 7 m diameter well (assuming depth of water 1.0 m and height of island to be 1.25 m including royality for earth @ rs. 5526.40 for each island.), providing and constructing one span service road to reach island location from one pier location to another pier location including royality for earth @ rs. 330.00 per m for service road., providing and laying cutting edge of mild steel weighing 40kg per metre for well foundation complete as per drawing and technical specification., plain / reinforced cement concrete in well foundation complete as per drawing and technical specification well curb(i) rcc m-35 grade, well steining(iii) rcc m-35 grade, bottom plug(i) pcc grade m-20, top plug(ii) pcc grade m-20, well cap(ii) rcc grade m-30, sinking of 8 m external diameter well (other than pneumatic method of sinking) through all types of strata namely sandy soil, clayey soil and rock as shown against each case, complete as per drawing and technical specification. depth of sinking is reckoned from bed level.(sandy soil(i) depth below bed level upto 3.0 m.), (ii) beyond 3 m upto 10 m depth, (iii) beyond 10 m upto 20 m, (iv) beyond 20 m upto 30 m, sand filling in wells complete as per drawing and technical specifications, supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and technical specifications clauses 1000 and 1202, substructure, r.c.c. grade m-30 in substructure complete as per dwg & tech specification (upto 5 m ht), r.c.c. grade m-30 in substructure complete as per dwg & tech specification (5 to 10 m ht), r.c.c. grade m-35 in substructure complete as per dwg & tech specification, supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and technical specification clauses 1002, 1005, 1010 & 1202, supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to irc: 83 (part-ii) section ix and clause 2005 of morth specifications complete including all accessories as per drawing and technical specifications., providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7, backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8, providing and laying filter media with granular crushed aggregates (jhama metal) as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification clause 1204.3.8, superstructure, providing and laying reinforced cement concrete in superstructure complete as per drawing and technical specifications clauses 800, 1205.4 and 1205.5, supplying, fitting and placing hysd bar reinforcement (fe 415) in superstructrue complete as per drawings and technical specification clauses 1002, 1010 & 1202, providing and laying cement concrete wearing course m-30 grade including reinforcement complete as per drawing and technical specifications clauses 80

CTN :41166614 Due date: 29 Jul, 202529 Jul, 2025 17.05 Crore
Tender For rrsmp/25-26 barsoi/04 - ghoghra to raksol, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., cement concrete/panel concrete pavementconstruction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approved grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383 as per actual design mix, processing 28 days minimum compressive strength of 35 (thirty five) mpa and minimum flexural strength of 4.5 (four point five) mpa, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing., brick solinglaying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kn as per technical specification clause 412, reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703ordinary kilometer stone (precast), reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703200 m stone (precast), retro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801600 mm equilateral triangle, retro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801600 mm circular, retro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm fi

CTN :41166620 Due date: 29 Jul, 202529 Jul, 2025 37.59 Crore
Tender For rrsmp/25-26 barsoi/01 - pathnaur dakshin tola to pathnaur, clearing and grubbing road land (by manual means)clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201., construction of subgrade & earthen shoulderconstruction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., cement concrete/panel concrete pavementconstruction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approved grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383 as per actual design mix, processing 28 days minimum compressive strength of 35 (thirty five) mpa and minimum flexural strength of 4.5 (four point five) mpa, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing., brick solinglaying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kn as per technical specification clause 412, reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703ordinary kilometer stone (precast), reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703200 m stone (precast), retro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801600 mm equilateral triangle, retro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and technical specification clause 801600 mm circular, retro-reflectorised traffic signsproviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x

Corporations / Associations / Others

CTN :41095266 Due date: 19 Aug, 202519 Aug, 2025 2.93 Crore
Tender For fabrication and installation of mild steel median safety grills in reach-6 line of elevated section from gottigere (kalena agrahara) to swagath road cross (tavarekere station) chainage- 0.00m to 7501.00 m of bangalore metro rail project, phase-2

CTN :41054539 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For construction of tetra hedron - cement oblique opc 43 grade in poly bags of 50 kg each conforming to is 8112 make acc oblique ambuja oblique india cement oblique birla oblique ultra tech , fine aggregate sand coarse best quality conforming to is 383 , coarse aggragate 20mm best quality conforming to is 383 , admixture 2.50ltr oblique cum make fosroc oblique sika oblique stp , mild steel tmt bars 12 mm dia as per relevent is 1786 2008 , mild steel tmt bars 20 mm dia as per relevent is 1786 2008 , mild steel binding wire 0.90 mm dia conforming to is 280 , primer , synthetic enamel paint camouflage pattern , diesel for concrete mixer , petrol per running of needle vibrator , painting rolling brush 12 inch isi marked , waterproof wooden ply board 2400mm x1200mm x12mm thk conforming to is 1328-1996 make supremegreen ply oblique kit ply , 2nd class soft wood plain fillets comma square or rectangular in section exc 06sqcm and exc 13sqcm clean sawn , ms nails of size 1 inch confirming to is 2366 1986 , ms nails of size 2 inch confirming to is 2366 1986 , ms nails of size 3 inch confirming to is 2366 1986 , multipurpose heavy duty gumboots of required sixe best quality , multipurpose heavy duty latest rubber hand gloves of required size and aproved make isi marked , showel square nose 14 gauge blade size 310 x 245 mm comma shaft size 710 mm fitted with strong steel crutched wooden handles , hammer earth with handle minimum weight 5 kg without handle , galvanised iron pan mortar tasla comma 18 gauge comma 16 inch dia minimum weight 01 kg , hand wood saw 18 inch , hack saw blades both sides make taparia oblique tata oblique hira , industrial safety helmet conforming to is 2925 of approved colour comma make taparia comma tata comma hira , plaster trowel with wooden handle isi marked , plumb bob iron best quality , stainless steel buckets 20 ltrs capacity comma guage of steel used in bucket to be minimum 18 gauge , needle vibrator comma capacity not less than 2 hp comma 220v singl phase oblique three phase , pipe cutter wheel dia 350 mm comma load speed 3800 rpm comma input power 2400 w comma net weight 15 point 800 kgs , pipe cutter blade14 inch dia suitable for electric heavy duty iron cutting machine , portable welding machine copper heavy duty portable comma air cooled 2 phase 230 oblique 440 volt comma load capacity 5 kw , welding rod no 10 comma 90 rod each pkt of make surya or equivalent with isi mark , protection gear for welding command one set of protection gear , pvc aluminum cable seathed 2 core x 10 sqmm 240 volt and 92 mtr each roll comma make plaza comma philips oblique v gard oblique equivalent , measuring tape 5 mtr best quality best quality isi marked , add amount for skilled labour

CTN :41054532 Due date: 04 Aug, 202504 Aug, 2025 NA
Tender For supply of abdominal bench , triceps press machine , twelve side urethane olympic plates , olympic bar , olympic curl bar , two tire dumbbells rack , twelve side urethane dumbbells , incline bench , seated leg press , shoulder press , functional trainer synergy 360 , treadmill , cross trainer , rowing machine abdominal bench- specification:- operation mode- adjustable, type- sit-up benches, weight capacity- 43 kg., size-1500x700x1000 seat material- pu foam with synthetic leather, tube- oval elliptical tube., triceps press machine- specification:- minimum- (lxwxh) 53.1 x43.7 x58.1 (135cmx111cmx148cm) live area-- (lxwxh) 77.1 x55.7 x82.7 (196cmx141cmx210cm) product weight-280-350 kg. max user weight-100-150 kg. standard weight-100-150 kg. heavy weight-120-180 kg., 12-side urethane olympic plates- specification:- 12- sided anti roll shape and two patented diametrically opposed handle openings for easy loading, pickup and storage is preferable. the handle contour is preferable to have ergonomically designed and textured for carrying. must have plate weight of 2.5 kg,5 kg.,10 kg.,25 kg.,35 kg ,45 kg., olympic bar- specification:- type- straight bar. material- mild steel, frame finishing/coating- 2 layer electrostatic power coating., length- 7 feet., weight of bar-20 kg(44lb)., thickness of olympic bar-32mm., grip section on both ends., freely rotating sleeves with ball bearing., olympic rod compatible with plates., warranty- minimum 02 year., olympic curl bar- specification:- type- curl ez bar. material-mild steel. frame- finishing/coating- 2 layer electrostatic power coating., length- 4 feet., weight of bar-15kg(33lb)., thickness of olympic bar-32mm., grip section on both ends., freely rotating sleeves with ball bearing., olympic rod compatible with plates., warranty- minimum 02 year., two tire ) /bid number : gem/2025/b/6447529 * /dated: 13-07-2025 & & / bid document 1 / 19

CTN :40859793 Due date: 28 Jul, 202528 Jul, 2025 NA
Tender For procurement of equipment, instrument, machineries, tools etc. related to laboratories and workshops of mechanical, electrical, civil, chemical engineering and science and humanities departments of hooghly inst of tech. - v notch channel test section: size: 250mm wide, 180mm deep; 600mmlong.materials : made with m.s lined with fiber or s.s 304baffle and deepened entry section for steadying water supply.arrangement for 7 fixing interchangeable notches.set of three brass notchesv notch (60 , 45 ).rectangular notch, electric oven size: 24 x 24 x 24- 03 shelvesspecification: vertical model , triple walled construction: front opening door, top mounted control panel for easy access, inner wall made of stainless steel with mirror polish, outer body made of mild steel with powder coat finish electrically operated thermostat with corresponding indicators. nichrome made long lasting heating elements, high grade glass wool insulation, g.i. made wire mesh shelves with adjustable runners., adsorption isotherm apparatusmagnetic stirrer in multi-position 6 and erlenmeyer flasks with lids (125 ml. - six nos.), distillation unit 1.distillation column : material stainless steel, dia 110mm, seven sieve trays.pressure gauge: bourdon type, 0-2 kg/cm2.rotameter: for cooling water flow rate measurement.steam generator: made of stainless steel, provided with pressure gauge & level indicator, safety valve & insulated with ceramic wool and cladding with aluminium foil.reflux divider: special arrangement to change r/d ratio automatically. condenser: shell & tube type made of stainless steel.bottom product tank: made of stainless steel, capacity 5 ltrs.distillate tank: made of stainless steel, capacity 5 ltrs.heater: nichrome wire heater.temp. sensors: rtd pt-100 typecontrol panel comprises of:digital temp. controller : 0-199.9 c, for steam reboilerdigital temp. indicator : 0-199.9 c, with multi-channel switchwith standard make on/off switch, mains indicator etc.2. flow measurement: rotameter for cold water for condenserdistillation still: material- stainless steel, capacity 5 ltrs (approx.) insulated with ceramic wool and cladding with aluminum foil.condenser: concentric tube type (material- stainless steel)distillate tank: material- stainless steel, capacity 2 ltrs.heater: nichrome wire heater.control panel comprises of :digital temp. controller: 0-199.9 c, rtd pt-100 type (for steam generator)digital temp. indicator: 0-199.9 c with multi-channel switch.temp. sensors: rtd pt-100 typewith standard make on/off switch, mains indicator, set up to determine the linear expansion co-efficient of a metal rod.material of metal bar: copper, length of metal bar(total):500mm, dia: 25mm, no of thermocouples mounted on the bar:6 , no of thermocouples in the insulated shell: 2, heater: band type, cooling jacket dia:75mm, no of thermocouples:10, ammeter: 0-5amp, voltmeter: -0-300v, dimmerstate:1000w, temp indicator: 0-300oc, experimental set up of bricks/walls in series for conductivity measurementdiameter of slab:0.3 m, thickness of bakelite, wood and ms plates: 0.012 m, temp of indicator: 0-300oc, ammeter - 0-5amp, voltmeter- 0-300v,heater: mica type, dimmer state: 1000w, vacuum filtration apparatus with buckner funnel apparatus.material porcelain, for use with (application)suction filtration, product type buchner funnel, glass reciver - 2000 ml, 5000ml , (customised), grade 41 filter paper pkt/ 100, concentric tube heat exchanger apparatusinner copper tube i.d, 12.7mm. and outer g. i. pipe i. d. 15mm. approx. and 1.5m. length.2. thermometers - 4 nos.3. measuring flask - 1 lit. capacity.4. geyser-3 kw. single phase.services required-1. 220v, 15a, stabilized single-phase ac supply.2. floor area - 3m x i m x 1 m height.concentric tube heat exchanger: (a)plain tube ( water to water ):the apparatus consists of two concentric tubes. inner tube consists of copper tube through which hot water flows. while the outer tube consists of gi pipe through which cold wat
 Loading, Please wait...

Connect us via What's Up