Web Analytics Made Easy - StatCounter

Relay Logic Controller System Tenders

Get complete information related to latest Relay Logic Controller System Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Relay Logic Controller System Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Relay Logic Controller System Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

CTN :40215081 Due date: 17 May, 202517 May, 2025 3.42 Lacs
Tender For supply, installation of 11kv ht metering cubical to ttd km bangalore for the work of providing 20 kva ups systems, wiring, ac units and ht cubical panel etc., to studio of svbc kannada channel at sv temple, ttd km, malleswaram, bangalore (part-b: ht metering panel)".

CTN :40075873 Due date: 09 May, 202509 May, 2025 NA
Tender For corrigendum : service contract for supply and erection of differential and metering current transformers of 3 mw alternater panel board

corporations/Associations/Others

CTN :40174822 Due date: 26 May, 202526 May, 2025 NA
Tender For procurement of mandatory spares of turbine control panel (tcp), automatic voltage regulator (avr) panel, and transformer relay metering panel of urgam shp - plc cpu card bmx p342020 programmed with existing logic make- schneider, plc rack bmx xbp1200make- schneider, plc power supplybmxcps2010make- schneider, plc digital input card bmx ddi3202make- schneider, plc digital output cardbmxddo3202make- schneider, plc analog input card bmxami810make- schneider, plc analog output cardbmx amo410make- schneider, power transducer 24vdc,i/p- 0-75mv dual o/p 4-20mmake- schneider, rishabh, power transducer 24vdc, i/p- 0-200v dual o/p 4-20mamake- schneider, rishabh, guard relay vaa21 24vdcmake- abb, alstom, master trip relay vajhm23, 24vdcmake- abb, alstom, speed monitor 4 digital o/p 1 ao 24vdc with its speed sensor make- omron, power transducer 24vdc pt3 cl 0.2make- secure, schneider, unitrol 1020 avr module programmed with existing filemake- abb, power contactor 3p, 25a, 24vdcmake- schneider, l&t, abb, siemens, glass fuse 500ma, glass fuse 2a, 250vdc, push button - black, blue , red, green, yellow (10 nos each color)make- schneider, siemens, no contact for pb - sei make- schneider, siemens, nc contact for pb - sei make- schneider, siemens, proximity sensor 18mm dia, 5mm sensing, pnp no, pre-wired 2m cable), mcb 2p, 16a, 10kamake- schneider, siemens, abb, hooter, aux. supply- 110vdcmake- alan, control relay 2no 2nc, 24vdcmake- schneider, siemens, abb, master trip relay vajhm23, 24vdcmake- alstom, abb, three phase voltmeter (digital) dm3210, voltage 90-277vac, 50hz, measuring volt 44-480vac, accuracy class 0.5, size 96mmx96mm, make- schneider , abb, secure, three phase ammeter (digital) dm3110, voltage 90-277vac, 50hz, input current 1a/5a, accuracy class 0.5, size 96mmx96mm, make- schneider , abb, secure, dc voltmeter 0-200vdc, pq96 200v cl 1.0, 90 deg, size 96mmx96mm, code no pq91-v1bl2n1caw000, make- rishabh, abb, secure, dc ammeter 0-20a, pq96 75mv, i/p 75mv, cl 1.0, 90 deg, size 96mmx96mm, code no- pq91-v0fl2n1caw000 make- rishabh, abb, secure, power factor meter, cq96 110v/1a, cq91-51ct1n1caw000, ct i/p 1a, pt i/p 110v, 50 hz, class 2.0, 90 deg, 3ph balance load, size 96mmx96mm make- rishabh, abb, secure

CTN :40139473 Due date: 26 May, 202526 May, 2025 NA
Tender For procurement of mandatory spares of turbine control panel (tcp), automatic voltage regulator (avr) panel, and transformer relay metering panel of urgam shp

Central Government/Public Sector

CTN :40135192 Due date: 05 May, 202505 May, 2025 NA
Tender For tender for supply of spares for switchgear panel for kothagudem - 4-20ma current transducer make-meco , 16a mccb (power circuit) make-schneider , 125a mccb (power circuit) make-schneider , 8a mcb (control circuit) make-schneider , 3200/1a ct for metering make- precise/ ae/ kappa , 80/1a ct for metering make- precise/ ae/ kappa , local/remote selector switch make-salzer , mcc modules selector switch make -l&t , 100a mccb make-schneider , pt potential class-b make-precise , trip coil for 800/1a make- l&t , closing coil for 800/1a make- l&t

CTN :40124293 Due date: 20 May, 202520 May, 2025 NA
Tender For design, reverse engineering, manufacturing, transit insurance, transportation, supply, installation, testing and commissioning of 33kv line protection & metering panel at 2x1125 kw pilangad shp located in district-uttarkashi (uttarakhand)

State Government

CTN :40071789 Due date: 19 May, 202519 May, 2025 NA
Tender For providing and installation of electrical accessories and allieds works at shaspur pwss, block-rampurhat-ii under bolpur mechanical division - supply, delivery at site and storage of wall mounted made of sheet steel fabricated 2 mm for load bearing & 1.6mm for non load bearing, indoor type, dust & vermin proof, lp-54 degree of protection, powder coated painted with rubber gaskets cover, front lockable hinged door with all switchgear and other items duly wired up and tested as per specification: incomer: (a) 100 amps, tpn mccb with adjustable ol, 36 ka, e/f, auto phase corrector & necessary accessories with suitable spd (i.e., ammeter, voltmeter, cts & switches), outgoing:- (b) 7.5 hp to 12.5 hp, tp star-delta starter with other accessories - 1 nos., (suitable size capacitor bank to improve pf from o.85 to 0.98) (c) yard lighting feeder with necessary accessories & time switch(digital) - 1 no. (d) 3phase actuator valve starter with other accessories -1 nos., (e) 2 hp ,3 ph,415v,clorinator feeder with necessary accessories & level controller-1 no., (f) 32a mccb fdr for iep/misc purpose-1no., (g) 32a mccb for in house light-1no.,(e) plc feeder with necessary accessories-1no.( all spare & components as per vendor list of phed), supply and delivery at site of 15 kva, 3phase, oil cooled type servo motor operated copper wound line voltage corrector conforming to is-9815 (pt.-1)- 1994 suitable for un-balanced input voltage with following specification including first filling oil as per is-335 where applicable.a) input voltage:- 3 phase, main supply may or may not be balanced with respect to phase to phase- 200v-500v phase to neutral-115v-290v.b) output voltage:-3 phase balanced output voltage. phase to phase- 400vor 415v 1%, phase to neutral- 230v-240v 1% (provision should be made to adjust the variation of output voltage per phase by a variable pot oil within 5% of output).c) line regulation:- out put voltage should remain well with 1% of set voltage (from minimum to maximum i.e. either 400v. or 415v. supply variation).d) load regulation : output voltage should remain neutral well within 1% of set voltage be ( from no load to full load ) i.e. either 400v. or 415v.e) correction speed:- better than 35 volt / second.f) efficiency:- better than 95% on full load.g) cut off limit (minimum &maximum ) by limit switch with audio & visual.h) metering indication:- by selector switch provision should be made available to measure input mains supply and output voltage other stabilizer for load current measurement an ammeter with selector switch should be available.i) lamp indication :- for input & output should be provided. ( 3 lamps per side ).j) mcb protection: for input side.k) load protection : hrc fuse on each output phase should be availablel) output over shoot:- beyond 210v to . 255v /phase in case of manual mode & voltage protection :auto mode operation.m) visual indication for under voltage & over voltage of output.n) manual mode:- up & down correction with o / p voltage over shoot protection. beyond 210 v-255 v. per phase.o) nature of cooling:- oil cooled system.p) electric current over load protection .q) circuit for delay output .r) input high voltage cut-off above 500 v.s) mode of operation:- auto/manual with a provision to restore the normal working of the unit standby operation should be available in case of any electronic failure in auto mode., installation of mcc panel along with main switch, changeover, busbar chamber, cut out etc. all electrical equipment within the pump house, drawing of cable properly on suitable size gi cable tray on wall / as per direction of eic as per layout & ie rules and all connection with supply necessary materials, cable etc to complete the work, making arrangement with supply & fixing of materials for taking power within the pump house from wbsedcl end as per direction of eic. [for ph no - i, ii & iii], installation of above supplied stab

State Government

CTN :40086290 Due date: 30 Apr, 202530 Apr, 2025 2.05 Lacs
Tender For construction of 8 no. type-ii quarters at govt. polytechnic collage talwar in tehsil jaisinghpur distt. kangra, hp (sh-providing metering panel, wire etc. (additional work) therein (balance work)

CTN :40065853 Due date: 09 May, 202509 May, 2025 NA
Tender For supply of disconnecting and taking out defective under ground lt cable from trenches , supply laying testing and connecting xlpe sheathedpvc insulated screened pvc beddedgalvanised steel strip , all as per boq item no 200 here in before but of size 40 core 16 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 25 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 50 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 70 sqmm complete all as specified , all as per boq item no 200 here in before but of size 35 core 95 sqmm complete all as specified , laying only and connecting xlpe sheathedpvc insulated screened steel strip of wire armoured electric power cable , all as per boq item no 800 hereinbefore but of size 40 core 16 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 25 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 50 sqmm complete all as specified , all as per boq item no 800 hereinbefore but of size 35 core 70 sqmm complete all as specified , excavating in trenches nexc 15 m wide and nexc 15 m depth for foundation etc or for shafts wells cesspits manhole pier hole , returning filling in including spreading levelling watering and well ramming in layers not exc 250mm in soft loose soil complete all as specified and as directed , removing excavated materials soils not exc 5000 mtr and depositing where directed at a level not exc 150 mtr above the starting point in soil complete all as specified and as directed , mandl sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches , mandl for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 80 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 50 mm bore dia , supplying and fixing galvanised mild steel pipe tubing light grade complete with all fittings of 100 mm bore dia , m and l for boring of horizontal hole under road pavement hardstanding suitable for passing through up to 80 mm bore , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size35 4 x 2550 sqmm , mandl for straight through joint heat shrinkable complete suitable for lt 1100 volt aluminium conductor cable of size35 x 70150 sqmm , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 25 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 40 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 50 mm bore dia , supplying and fixing high density polyethylene pipes hdpe of pressure rating 6 kgf cm2 complete with all fittings of 100 mm bore dia , material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm mm buried directly in ground , dismantling existing lt panels of any type any size carefully for reuse including necessary excavation demolition of concrete , labour only for disconnecting isolating and taking out burned unserviceable lugs switchgear metering devices wiring bus bar etc , supply only the followings to be incorporated against item no 3000 and 3100 only 06 sqmm to 16 sqmm , 25 sqmm to 50 sqmm , 70 sqmm to 95 sqmm , 120 sqmm to 240 sqmm , epoxy type insulator upto 1100volt for lt panel bus bar including nut bolts etc complete all as specified and as directed , single core stranded copper c

CTN :40040033 Due date: 24 Apr, 202524 Apr, 2025 2.83 Lacs
Tender For construction of office building and 10 residential quarters 4 nos type ii 3 nos type iii qtrs 1 no type iv qtrs 1 no type v qtrs including one transit accommodation at special bureau guwahati sh-providing different types of metering panelsubwork/packages:providing different types of metering panel
 Loading, Please wait...

Connect us via What's Up