Get complete information related to latest Relay Module Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Relay Module Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Relay Module Tenders.
Tender For automatic star delta starter control panel for 10 hp submersible pump, fully automatic with digital ammeter and voltmeter, power supply suitability is three phase/415 v/ 50hz, thermal bimetallic relay for protection against overload or single phasing and severe unbalanced load, non compensate type capacity is 20 a, overload relay range 13.2 - 20 a, contactor rating current (a) is 20 a, overall dimension (lxwxh) is 175mm x 150mm x 90mm, material and thickness of ms sheet used is m.s sheet 1.6mm thick, color of paint finish is grey, auto manual switch position selection switch type is 3 position(auto-manual), availability of test report from central govt/nabl/ilac accredited lab to prove conformity to specification. similar to bch 10 hp starters control panel forsubmersible pump model: cpsdeynbl2. preferrable make: l&t, havells, subtech, siemens, bch and crompton. ]
Tender For supply of miscellaneous instrumentation and mechanical items for imd section including flexible hose pipes , sae rubber flexible hose pipes, ups units , phoenix contact fuse terminal blocks , phoenix terminal blocks, phoenix contact relaymodules , double acting piston cylinders with reed switches , and complete seal kits for magnetic power cylinders
Tender For tender for supply of supplying , installing , testing and commissioning approved make microprocessor based single (01) loop , networkable addressable fire alarm control panel , supplying , installing , testing and commissioning approved make digital audio amplifier. , supplying , installing , testing and commissioning approved make remote paging station for zone selection , supplying , installing , testing and commissioning approved make modbus interface gateway , the mimic annunciator for the fire alarm control panels (facp). , supplying , installing , testing and commissioning approved make addressable multi-criteria photo-thermal detector , supply , installation , testing and commissioning addressable self-test multi-criteria photo-thermal detector , supplying , installing , testing and commissioning approved make addressable manual call point , supplying , installing , testing and commissioning approved make addressable control module for sounders , supplying , installing , testing and commissioning approved make addressable relaymodule for ahu , access control , lifts , staircase pressurization , fire suppression & other third party outputs , supplying , installing , testing and commissioning approved make isolator module for isolating short / dewired / loose circuits with automatic resetting arrangement , supplying , installing , testing and commissioning approved make response indicator , supplying , installing , testing and commissioning of hooter cum strobe with in-built lithiumion battery , supplying , installing , testing and commissioning approved make 2w multi-tap wall mount speakers , supplying , installing , testing and commissioning of approved make auto dialer which supports gsm and pstn both , supply and laying of 2 c x 1.5 sq.mm. armoured cu multi-stranded twisted shielded frls copper cable , red in colour. , camc for 4 years after expiry of one year warranty of addressable fire detection system
Tender For tender for supply of spares for rockwell plc installed at grep compressor station gail vaghodia -spares for rockwell plc installed at grep compressor station gail vaghodia -relay contact o p isolated 1794 ow8 8bit , flex i o module frequency input no of i , module analog i p 1794 ie8 12bit 8point , o p module source 16 24v 1794 ob16p , analog output module 16 bit 1794 of4i , analog input module 16 bit 1794 if4i , flex i o term base allen bradley cat n , i p mod non isolated t c 1794 irt8 , plc slot rack p n 1756 a7 , plc chasis 10 slot control logix , ethernet comm module 1756 enbt allen , controllogix dc redundant power supply , power sup mod plc p n 1756 psca2 allen , adapter redundant media 1794 acnr15 , voted eods relaymodule xm 442 , sink i p module 24vdc 16poit 1794 ib16 , dualspeedmodulexm 220 , plc controller cat no 1756 l71 , fast analog 4 cur volt in 2 cur volt ou , prosoft com mod plc p n mv156 mcmr allen , modbus ethernet module mvi56e mnetcr
Tender For standing order/rate contract for supply of abb make electrical materials on door delivery and callup basis at hbl plant sugauli, east champaran and lauriya, west champaran, bihar - power contactor a09-30-10, coil voltage 110v ac, make - abb, add on for a09-30-10, ca5-10, part no : 1sbn010010r1010, make - abb, power contactor a09-30-10, coil voltage 220vac, make - abb, power contactor a30-30-10, coil voltage 220vac, make - abb, power contactor af09-30-10-12, coil voltage 48-130vdc, make - abb, power contactor a09-30-10, coil voltage 415vac, make - abb, power contactor a12-30-10, coil voltage 110vac, make - abb, power contactor a16-30-10, coil voltage 230vac, make - abb, power contactor a26-30-10, coil voltage 110vac, make - abb, power contactor a26-30-10, coil voltage 230vac, make - abb, power contactor a50-30-10, coil voltage 110vac, make - abb, power contactor a95-30-11, coil voltage 110vac, make - abb, auxillary contactor nf40e, coil voltage 110vac, make - abb, auxillary contact cal18-11, coil voltage 230vac, make - abb, auxillary contactor n40e, coil voltage 220vac, make - abb, add on block, ca5-01, 1nc type, part no : 1sbn010010r1010, make - abb, add on block, ca5-22 e, 2no+2nc type, part no : 1sbn010040r1022, make - abb, add on block, ca5-10, 1no type, part no : 1sbn010010r1010, make - abb, power contactor nl40e , coil voltage 24vdc, make - abb, auxillary contactor n22e, coil voltage 220vac, make - abb, auxillary contactor n40e, coil voltage 220 ... 230vac, make - abb, thermal overload relay, ta25du 2.4m, range- 1.7-2.4a, part no :1saz211201r2028, make - abb, thermal overload relay, ta25du 4.0m, range- 2.8 -4.0a, part no :1saz211201r2033, make - abb, thermal overload relay, ta25du 6.5m, range- 4.5- 6.5a, part no :1saz211201r2038, make - abb, thermal overload relay, ta25du 11m, range- 7.5- 11.0a, part no :1saz211201r2043, make - abb, thermal overload relay, ta25du 8.5m, range- 6.0-8.5a, part no :1saz211201r2040, make - abb, electronic overload relay, e45du 30, range- 9- 30a, part no : 1sax211001r1101, make - abb, thermal overload relay, ta25du 19m, range- 13.0-19.0a,part no :1saz211201r2047, make - abb, thermal overload relay, ta25du 19m, range- 13.0-19.0a,part no : 1saz211201r2053, make - abb, thermal overload relay, ta75du 42, range- 29 - 42a, part no : 1saz321201r2003, make - abb, thermal overload relay, ta80du-52m, range- 36- 52a, part no : 1saz331201r2004, make - abb, thermal overload relay, ta75du 63, range- 45-63a, part no : 1saz321201r2005, make - abb, electronic overload relay,e16du 6.3, range- 1.9 -6.3a,part no : 1sax111001r1104, make - abb, off-delay timer, ct-ahc.22,(0.05 s-100 h) with 2c/o part no : 3adc340091r0001, make - abb, mpcb ms116-0.63, range- 0.40 0.63, part no : 1sam250000r1004, make - abb, mpcb ms116-1.6, range- 1.00 - 1.60, part no : 1sam250000r1006, make - abb, mpcb ms116-1.6, range- ms116-2.5, part no : 1sam250000r1007, make - abb, electronic overload relay,e16du 18.9, range- 5.7- 18.9a, part no :1sax111001r1105, make - abb, thermal overload relay, ta75du 63, range- 45 ... 63, part no : 1saz321201r2005, make - abb, sfu 200a, 3p+n, os250d03n3p, part no : 1syn022749r9430, make - abb, sfu 250a, 3p+n, os250d03n3p, part no : 1syn022749r9430, make - abb, sfu 160a, 3p+n, oesa00160n, part no : 1syn022753r9320, make - abb, sfu 125a, 3p, oesa 00125, part no : 1syn790290p0500, make - abb, sfu 63a, 3p, oesa 00-63, part no : 1syn790290p0497, make - abb, sfu 32a, 3p, oesa00-32, part no : 1syn790290p0493, make - abb, hrc fuse, ofafn000gg6, 6a, gg, 500 v, 80 ka,part no : 1sca107748r1001, make - abb, hrc fuse, ofafn000gg6, 6a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg10, 10a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg16, 16a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg20, 20a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg25, 25a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn000gg32, 32a, gg, 500 v, 80 ka, make - abb, hrc fuse, ofafn00gg50, 50a, gg, 500 v, 80 ka, make - abb, hrc fuse,
Tender For tender for supply of internet of things - arm based single board computer wi-fi + ble development board kit 32-bit arm based development board 32-bit mcu prototyping board temp & humidity sensor ultrasonic sensor air quality sensor pir motion sensor soil moisture sensor relaymodule (5v, 4-channel) servo motor camera module 5mp voice recognition module (offline) sound detection/microphone sensor module (basic)
Tender For supply of power contactor or motor feeder 32a , power contactor 240v ac coil 32a ty cl45 , 0.8-1.25a bi metal overload relay 3ua50 , bimetal overload relay 6.3 to 10a , thermal overload relay range 9 to 15amp , overload relay 13.3 to 22a for ah , abb make mpcb model no. ms325 2.50 , mpcb range 4a-6a , mpcb 6.3 10a
Tender For supply of 2.2 kw ac crane drive , 5.5 kw ac crane drive , 11.0 kw ac crane drive , 22.0 kw ac crane drive , 37.0 kw ac crane drive , 55.0 kw ac crane drive , 75.0 kw ac crane drive 3 phase, digital ac crane drive 2.2 kw, ac drive should be suitable for heavy duty operation of 2.2 kw. offered ac drive should be suitable for crane-hoist operation. if, separate software required for crane application, it must be clubbed with supply of material. ac input voltage: 380 to 480v ac 10%, 3 phase, 3 wire, 50 hz; mode of control: bi-directional fully controlled 3-phase ac; speed regulation: 1% of base speed; braking: suitable dynamic braking resistance and chopper unit (external or in-built); acceleration time: 0.1 to 1000s or better; deacceleration time: 0.1 to 1000s or better; overload: 150%-1min, 200%-3.0s; ambient temperature: 0 to 50 c (derating shall not occur below 50 c. in the event that derating occurs below 50 c, the supplier shall provide a higher-rated drive to match the requirement); rated current at 50 c: min. current should be 5.5 amps at 50 c; high starting torque at low speed: 200% starting torque at 0.3 hz; two analog inputs: two nos. analog inputs having signal voltages of 0 to 10 vdc or 4 to 20 ma (configurable); two analog outputs: two nos. analog outputs having signal voltages of 0 to +/-10 vdc or 4 to 20 ma (configurable); six digital inputs: pnp/npn; one relay output: with short-circuit and overload protection; two digital outputs: with short- circuit and overload protection; brake release signals: outputs braking signals based on inverter operating conditions to prevent cargo bed rollback and overrunning; load adaptive control: when the actual load level is lower than the configured load level, the system can be operated at a ratio-multiplied speed (in terms of the configured frequency), resulting in significantly better efficiency; load ) /bid number : gem/2026/b/7563714 * /dated: 20-05-2026 & & / bid document 1 / 29 frequency), resulting in significantly better efficiency; load limiter: maintains the safety and rescuability of suspended loads by stopping when excessive torque is detected and by allowing operation only in the direction opposite to that in which the excessive load was detected; cooling capacity degradation alarm: detects and displays cooling capacity drop due to cooling fin clogging caused by dust and cooling fan airflow reduction; igbt life expectancy forecasting: estimates the power cycle life expectancy of the main circuit s igbt semiconductor device temperature due to frequent acceleration and deceleration stoppages, and displays the estimate before the design life is reached; protection: it must have all standard protections like stall protection, instantaneous power failure, single phasing, over voltage, under voltage, over current, inverter overload, thermal overload etc; display console: it must have alpha numeric display console for programming of drive, fault display and operating condition; dynamic qr code: it must have dynamic qr code for trouble shooting; tuning facility: it must have auto tuning facility. this must enable perfect matching of motor coupled to load with regards to optimum acceleration time, deceleration time, speed regulation etc; drive programming software: suitable drive programming software along with necessary connecting cable and adapter for connection with laptop and drive should be provided to get online with the offered drive (laptop not in scope); automatic voltage regulation: it must have automatic voltage regulation function to maintain high starting torque even at reduced voltage; regenerative option: it must be capable of regenerative operation; communication protocol: modbus (rtu/serial) or ethernet (tcp/ip); make of drives: fuji- electric/yasakawa/schneider/abb only; suitable dynamic breaking resistance unit of 60% wattage rating of drive, however the value of resistance is to be decided by manufacturer as per their technical manual for crane-ho