Get complete information related to latest Relay Rack Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Relay Rack Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Relay Rack Tenders.
Tender For supply of stainless steel luggage rack for lhb coaches, as per drawing: la62102 alt g, packing instruction: light luggage rack: individual aluminium/stainless rod to be protected with biodegradable transparent cling sheet.each piece to be properly wrapped with biodegradable bubble sheet & then maximum 10 pieces to be packed in one cardboard box.2 nylon strips to be provided on both sides of the box.a list should be pasted on each box and showing order no,pl no, description of item,drg no/spec no/set list no with version,qty,firm's name & address,date of despatch etc. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of supplying, installation, testing and commissioning of 5 or 6mp ip ir dome camera , supplying, installation, testing and commissioning of 5 or 6mp ip ir bullet camera , supplying, installation, testing and commissioning of 32 channel nvr , supplying, installation, testing and commissioning of surveillance grade hard disk , supplying, installation, testing and commissioning of 24 port layer 2 indoor network switch , supplying and fixing of 24 port cat 6 patch panel loaded , supplying, drawing, installation, testing and commissioning of cat6 utp lszh23awg twisted pair cable , supplying and fixing of wall mount rack , supplying, installation, testing and commissioning of rj 45 connectors , supplying and fixing of medium class pvc conduit , comprehensive annual maintenance
Tender For corrigendum : supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrie
Tender For auction sale of others - total qty.= 276 nos., description: - def. full size location box-29 nos.,def. signal point machine with motor-7 nos., def. signal point machine without motor-2 nos., def. battery charger 230-110v/30 amp-1 nos., def. track battery charger 6v/110-15 nos., lc gate pedestal(iron)-6 nos., lc gate boom(pipe)-100 nos., smps box(ips statcon)-3 nos., dc-dc converter box-5 nos., cvt module statcon(defective)-1 nos., distilled water plant/filter(defective)-3 nos., relayrack(released)-2 nos., lc gate lock post(defective)-5 nos., reset box-20 nos., leds defective (main led, calling on, shunt, route)-70 nos., point group relay(defective)-5 nos., lc gate panel(defective)-1 nos., ufsbi panel(defective)-1 nos. (remarks - material to be sold on as is where is basis and will be delivered in numbers.)
Tender For corrigendum : ner acting for and on behalf of the president of india invites e-tenders against tender noner_snt_proj_bsb_03_2026 closing date/time 21/07/2026 15:30 hrs. bidders will be able to submit theiroriginal/revised bids upto closing date and time only. manual o ers are not allowed against this tender, and any suchmanual offer received shall be ignored.1. nit headername of worksurvey, design, supply, installation, testing, and commissioning of automaticblock signalling work utilizing msdac for continuous track circuiting includingassociated auxiliary works at adjoining stations along with 4x48 ofc work in theaunrihar jn (arj) - chhapra jn.(cpr) section in the varanasi division of n.e.railway.bidding typenormal tendertender typeopenbidding systemtwo packet systemtender closing datetime21/07/2026 15:30date time of uploadingtender22/05/2026 16:46pre-bid conferencerequiredyespre-bid conference datetime05/06/2026 15:30advertised value 1361067788.19 tendering section projectbsbbidding stylesingle rate for eachschedulebidding unitearnest money (rs.) 27221400.00validity of offer ( days) 90tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 07/07/2026are jv allowed to bid yesnumber of jv memberallowed3are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a1- electronic interlocking items.357015720.82above/below/para1001 18.00pergoomty/ibh/ autohut7787135.28140168435.04 at par140168435.04page 1 of 26run date/time: 10/06/2026 15:46:05ner hq-s and t/north eastern rlytender documenttender no: ner_snt_proj_bsb_03_2026closing date/time: 21/07/2026 15:301description:- design, manufacture, supply of hot standby architecture electronic interlocking(ei)system complete as per rdso spec. no. rdso/spn/192/2019version 2 with latest amendment, ifany. mainly consisting of cpu cards, input cards, output cards, interfacing equipments and allrequired accessories for controlling automatic signals from mid-section auto relay huts andcommunicating directly through ofc (laid in redundancy with route diversity) with adjoining autorelay huts & ei/pi of stations asper schematic diagram of abs scheme given in annexure-i and sip/roll plan of abs section attached. for system 'a' & 'b' of ei, segregation between the dc-dcconverters should be made so that in case of failure, only one system is a ected and dc-dcconverters shall be provided in n+1 con guration. dual vdu for operation (2 no. of fanlessembedded industrial grade pcs, 2 nos. industrial grade 55" 4khd led vdu and 1 no. maintenanceconsole (fanless embedded industrial grade pc and industrial grade 55" 4khd led vdu with ups,backup min. 1 hr. & printer color laserjet with scanning facility similar to hp mfp 3303sdw) as perrdso's tan no. sts/e/tan/3007 ver. 2.0 dt.22.04.2026(latest).this also includes supply of all typesof interconnecting cables, racks/cabinets for ei, relayracks, connectors, fixtures, mountingarrangements, media converters, networking switches, surge & lighting protection devicescompatible to rdso standards & as recommended by oem, wiring materials, consumables,communication equipment etc. & all required accessories to make ei system functional for arh asper approved sip. note:(i).tenderer should submit details of individual cards/ modules with itemwise details, rate and quantity prior to ca in proforma attached as annexure-'b'.(ii)item wise ratesare only for indicative purpose & will not be used for evaluation of tender.(iii).the ei systemincluding its equipments and sub systems shall be under warranty for 3years from the date ofcompletion of each ei.(iv).ctr, ext. datalogger and all types of ext. relays for this item such asqn1,qna1, ledecrs,qspa1, ql1, klcrs will be provided by railway.(any speci
Tender For bid to ras supply of table officers 5 feet x 3 feet x 2 point 5 feet with computer table 3 point 5 feet x 1 point 25 feet x 2 feet with wheel table with drawer 1 point 25 x 1 point 5 x 2 feet with wheel , table size 1500 mm x 750 mm x with drawer and locking system as per sample , drawing checking table of size 1500 mm x 3000mm as per sample , computer table wooden as per sample 3 feet x 2 feet x 2 point 5 feet , drawing rack 06 tier a0 size hanging type as per sample , table glass size 1500mm x 750mm x8mm thick as per sample , table glass size 1500mm x 3000mm x8mm thick as per sample , photo frame for aps calender 32 inches x 22 inches as per sample , bty 12 v 75 ah for online ups sample approved by so1 adm before the dispatched exide amron luminous
Tender For auction sale of depot miscellaneous scrap - scrap panel board, panel, data logger, esab panel, relayrack, junction box, hp power panel, electrical boxes, ips set panel,rr/erru,rlt panel,lt disturibution panel,pump panel off size,ats panel,indication panel,amf panel, emergency battery charger, voltage regulator battery panel,and other panel with or withour wire / cable etc. old used and u.s. [loading by purchaser]