Latest relay test kit Tenders | Government relay test kit Tenders

Central Government/Public Sector

CTN :45337215

29 May, 2026 NA

Kapurthala - Punjab

Tender For supply of sulphuric acid battery grade in kg(concentrated)isi marked, as per drawing: is:266-93(latest), packing instruction: sulphuric acid battery grade concentrated 20 kgs net material as per is: 266/1993 with amdt. no1 or latest shall be packed with standard packing in new ,sound,non-returnable isi marked container as detailed below. 1) the material of container shall be manufactured with virgin (hdpe) high density polyethylene as per cl. 5.1 of is: 6312 /94 with amdt. 1&2 or latest. recycled hdpe material shall not beused. 2) the container shall be with provision of 5% ullage ,colour as per cl.5.1 of is:6312 with amdt. 1&2 or latest. 3) the container shall be fitted with leak proof screw capstopper. 4) the container shall be isi marked as per is: 6312/1994 with amdt. 1&2 or latest class ? l ? type 2a including environmental stress crack resistance (as per clause 8.9 ) & drop test at zero degree centrigrade (as per clause 8.4.2). 5) the material used forproduct packaging shall be eco- friendly, recyclable, biodegradable. 6) the container shall satisfy requirement of compatibility test (destructive test) to is: 266/1992 with amdt. 1 ( iiird revision )r.a. 2004,is: 265 /1993(iv revision) amdt.2 to 5 or latest as per clause 12.4.1 & 12.4.2 of is:2798/1998 or any other test applicable as per drg/spec. 7) each container shall be stenciled/labeled handle with care, hazard sign, consignee name,non- spillable, order no,pl's no ,description of item, batch no, drg/spec no, qty,firm's name, &date of dispatch etc., quality plan: n.a. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45338167

16 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of gel for bogie cleaning as per technical specification given below: 1) appearance - pink gel 2) density (25 degreec) - 1.0 g/ml 3) ph (25 degree c) - 9.8 4) conductivity (25 degree c) - 4.9 ms/cm 5) the biodegradability test standard should be as per oecd* guideline 302b. (note: 1 no = approx. 30 kgs. container.) make: dst-gel/2 or similar. note: 1) firm shall specify the product name and model no./catalogue in their offer, otherwise offer will not be considered 2) firm shall comply all thedetails about the technical specification in the tender. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45338169

16 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of floor cleaner as per technical specification given below: 1) appearance - clear, slightly yellow 2) density (25 degree c) - 1.06 g/ml 3) ph (25 degree c) - 9.6 4) conductivity (25 degree c) - 24.8 ms/cm 5) the biodegradability test standard should be as per oecd* guideline 302b.( note: 1 no= approx. 30 kgs) make: dst-chemicals or similar. note: 1) firm shall specify the product name and model no./catalogue in their offer. otherwise offer will not be considered 2) firm shall comply all the details about the technical specification in the tender. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45338173

16 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of multipurpose cleaning gel for loco washing as per technical specification given below: 1) appearance - clear, slightly yellow 2) density (25 degree c) - 1.1 g/ml 3) ph (25 degree c) - 9.7 4) conductivity (25degree c) - 52.5 ms/cm 5) the biodegradability test standard should be as per oecd* guideline 302b. (note: 1 no= approx. 30 kgs. container) make/model: dst-degreez/9 or similar. note: 1) firm shall specify the product name and model no./catalogue in their offer, otherwise offerwill not be considered 2) firm shall comply all the details about the technical specification in the tender. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45338413

24 Jun, 2026 NA

Bangalore - Karnataka

Tender For ceramic fibre blanket of is: 15402:2003 to the following specification:1) type of material: type-ii2) grade: 1203) bulk density: 128 kg/m. cub4) tensile strength(longitudinal direction): 40 kps5) linear shrinkage at 1400 deg cent: 4% max6) thermal conductivity at 500 deg cent: 0.15 w/mk max7) al2o3: 29-37%8) sio2: 42-57%9)zro2: 13-18%10)lengthof blanket: 7300 mm minimum11) width of blanket: 610 mm(with tolerance +10 & -2 percentage)12) thickness of blanket: 12 mm(with tolerance +12 & -3 percentage)note:-a) material should be tested in nabl accredited lab and test certificate to be providedd uring supply.b) the material shall be packed in waterproof polythene bags which shall be further encased in card board cartons ]

CTN :45318187

15 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of self recording rain gauge , maximun minimum thermometer digital , screw gauge , prismatic compass with stand , auto dumpy level with stand and staff , abney level , robotic total station 1 inch accuracy bluetooth auto target , kerosene or gas stove or electric hot plate , ghat tracer , pegging rod , optical square 90 degree , ranging rod 3 mtr long , high precision binacular , temperature gun for checking bituminous surface works , sample tray enamelled , vibrating wire , termperature sensor , portable indicator , steel tape 5m , standard pyconometer of 50 ml , digital hygrometer , post hole auger with extensions , rodo meter - high precision wheel odometer , hot plates 200 mm dia 1500 watt voltage 220v to 230v , circular plates of 250 mm dia , sampling pipettes fitted with pressure and suction inlets, 10 ml capacity. , sampling tins with lids 100 mm dia x 75 mm ht 500 gms capacity , electronic digital micrometer , ennore standard sand 25 kgs bag , weighing machine 0 kg to 10 kgs , mould 15cmx15cmx15cm for compressive strength of concrete , digital vernier calipers accuracy 0.001 mm , thermometers mercuryinglass thermometer 0 to 250 c mercury-in-steel , glass thermometers range 0 degree c to 100 degree c 100 degree c , mortar cube 70 pt 6 mm , cbr plunger with settlement dial gauge holder , ring and ball app for softening point , specific gravity test bottle with vaccum pump , tripod stands for holding dial gauge holder , metallic laboratory thermometers range up to 300 c , spacers disc 148 mm dia 47.7 mm ht. with handle , comprising beakers capacity 1000 ml glassware , pipettes capacity 50 ml glassware , perforated plate brass , metallic thermometers range up to 300degree c 300 degree c , specific gravity and water absorption testing machine , marshall sample mould , stop watch one and half sec. accuracy , field density apparutus complete setsand relacment method , compaction test equipment both 2.5 kg and 4.5 kg rammers , cbr moulds 150 mm dia -175 mm ht. , 150 mm x 300 mm ht. cylinder with capping component , riffle box , soaking tank for accommodating 6 cbr moulds , speedy moisture meter complete with chemicals , standard measures of 30, 15 and 3 litres capacity alongwith standard tamping rod , distant reading thermometer 0 degree c 250 degree c , sand pouring cylinder with conical funnel and tap and complete , gi seive set 125,90,75, 63,53,45,37.5, 14, 13.2,12.5,11.2,10,9.5,5.6,4.75mm , water still 20 ltr capacity , glass beakers borosilicate 4 nos of 100 cc, 200 cc, 500cc, 1000cc capacity , pentrometer with standard needles , platform balance 300 kg capacity , drying ovens. thermostatically controlled 100 degree c to 110 degree , water bath electrically operated and thermostatically controlled , dial gauge 25 mm travel -0.01 mm or division , aiv testing apparatus complete set , is sieve sets 450 mm internal dia with lid and pan 30 sieves in 1 set , sieves 450 mm internal dia of sieve sets as per bis of required sieve sizes , is brass sieve sets 200 mm internal dia with lid and pan 35 sieves in 1 set , sieves 200 mm consisting of sieve set of required sieve sizes with lid and pan , is sieve 75,53,45,22.4,11.22 6.5,9.50,5.6,4.75,2.36,1.18mm , soxhlet extraction or centrifuge type apparatus , oven electrically operated, thermostatically controlled including thermometer , sieve shaker capable of shaking 200 mm operated with time switch , weight machine 30 kg electronic type , high frequency mortar cube vibrator for cement testing , specific gravity apparatus , rapid moisture meter is 12175 1987 , flash and fire point apparatus , ductility testing apparatus electrically operated , density testing machine complete set bucket method , rebound hammer concrete testing hammer , furol viscometer , sand equivalent test apparatus , standard sand for density test , lab cbr testing equipment for conducting cbr testing 5 tonne cap , unconfined compression test appratus , marshal stability test machine , los-angeles abrasion te

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

Central Government/Public Sector

CTN :45278015

05 Jun, 2026 NA

Kolkata - West Bengal

Tender For procurement of hospital consumables items - adhesive tape (width 5 cm x length 5 m), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use (2 ml), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use (5 ml), disposable syringe, sterile hypodermic, non toxic, non pyrogenic, single use. central luer slip, ribbon pack (10 ml), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (6.5 ’’), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (7’’), surgical rubber gloves, pre-powdered, for single use, anatomically shaped for comfort, textured surface for excellent instrument grip (7.5’’), infusion set, eto sterile, non-pyrogenic, non toxic, single use, 1 ml ± 20 drops (per ml d.w)needle size 21/g gravity feed only (standard), blood administration set, sterile, non toxic, non-pyrogenic , gravity feed, dehp free, single use only, 20 drops of distilled water equivalent to 1 ml ± 0.1 ml (1g ± 0.1 g) (standard), pulse oximeter (handy), display – oled/ lcd, battery- 3v : 2aaa, spo2 measuring range – 35% to 100%, accuracy - ± 2bpm or ± 2% (standard), nasal oxygen catheter , 2 m long multichannel kink resistant tube with extra soft medical grade nasal tips, sterile, non-toxic, single use (standard), accu-sure blood glucose test strips , no-coding system, accu-sure blood lancet, sterile, round (100 units pack), urine collection bag with top outlet & non-return valve, disposable, non-toxic, non-pyrogenic, single use, capacity – 2000 ml (adult), oxygen mask, sterile ,soft, flexible, medical grade, star lumen, for single use (adult), nebulizer mask, with aerosol mask (elastic strap) 2 meter long multi channel tubing, sterile single use (adult), latex examination gloves, powdered, non-sterile, ambidextrous, single use (large size), disposable surgical 3 ply face mask, anti allergic, fluid resistance, optimal comfort high particle filtration (adult), disposable surgical cap, sterile, medical grade, spandex and polyester elastic, (adult), i.v cannula with injection port & wings, 20g, 1.1 x 32mm, 61ml/min (standard), i.v cannula with injection port & wings, 18g, 1.1 x 32mm, 61ml/min (standard), cannula fixator, extra strip for additional adhesion (standard), round spot band-aid , material – cloth, adhesive (l x w x h = 50 x 80 x 45 millimeters), urine collection container, sterile (60 ml), enema kit for adults, reusable & washable, polyvinyl chloride make (1500 ml), clot activator blood collection tube, vacuum, medical grade pet, transparent, 4.0 ml, clot activator coated on the inner wall to accelerate clotting, pre-sterilized & disposable (13 x 75 mm), k3 edta blood collection tubes, vacuum, medical grade pet, 2ml, transparent, pre-sterilized & disposable (13 x 75 mm), sodium fluoride blood collection tube, vacuum, medical grade pet, transparent, 2.0ml (13 x 75 mm), prothrombin time collection tube, vacuum, medical grade pet, transparent, 2.7ml tubes, pre-sterilized & disposable (13 x 75 mm), biomedical waste carrying bag colour – blue/yellow/red/black non chlorinated bis -9738 certified polymer made, biomedical waste bag thickness minimum 120 micron and manufacturer details should be printed on the bag. the bag should be leak proof and the bmw bag must include one cable tie. all bags are to be customized with biohazard symbol, preprinted as per wbpcb norms (size – 65 cm (b) x 80 cm (l) for 50 litre), biomedical waste bin – colour – blue/yellow/red/ black, high density polyethylene (hdpe), 50 ltr capacity, weight – 3.5 kg (approx), all bins are to be customized with biohazard symbol (dimension (l*w*h) 415 x 425 x 615 mm (approx.), electric needle cutters , weight-0.3kg to 2 kg, power consumption- 60w-100w, burning temperature-16000c, abs plastic body with stainless still, removal drawer for waste collection (dim

Central Government / Public Sector

CTN :45138848

29 May, 2026 NA

Hyderabad-T - Telangana

Tender For supply of silicon valve and packing grease oks 1110/6 or its equivalent in stanvac as per parameters given. 1.parameter: apperencerequirement:water white. 2.parameter:temperature range requirement: +40 deg. c to + 260 deg. c. 3.parameter:worked penetration requirement: 300 to 320 0.1mm at 25deg.c 4.parameter:density at +27deg. c requirement:0.90-0.98 g/cc. 5.parameter:water resistance test requirement:0-90 din 51807. 6.parameter:drop point requirement:> +250 deg c. 7.parameter: base requirement:silicon oil,inorganic thickener. 8.parameter:base oil viscocity at+25deg c requirement:12500 cst.3. p as per drg.no. 9. parameter:packing requirement: sealed containe make:molygraf 11/6 is accepted. accepted make : molygraf.. [ warranty period: 30 months after the date of delivery ]

CTN :45049882

25 May, 2026 NA

Lucknow - Uttar Pradesh

Tender For cross linked polyolefin thermal insulation (xlpe) sheet/roll of size 1.2 mtr x 16 mtr x 25mm thick cross-linked closed cell polyolefin thermal insulation foam with factory applied aluminum foil for mechanical protection for heat and thermal resistance density 25 kg/m^3 suitable test certificate to be submit. sample to be approve before bulk supply. [ warranty period: 30 months after the date of delivery ]

Relay Test Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors