Latest relay testing kit Tenders | Government relay testing kit Tenders

Central Government / Public Sector

CTN :45738713

10 Jul, 2026 NA

Delhi - Delhi

Tender For supply, installation of three phase ht relay testing kit

CTN :45730241

20 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of single phase relay testing kit with laptop (secondary injection kit) for testing numerical relays of traction substation. detailed specification is attached [ warranty period: 18 months after the date of delivery ] ]

CTN :45697944

13 Jul, 2026 75.00 Lacs

Dhanbad - Jharkhand

Tender For supply of pn or zener diode or led characteristics apparatus , verification of kcl and kvl , resistance in series and parallel apparatus , ohms law apparatus without power supply , ohms law apparatus with aluminum panel 2 digital panel meters and power supply , transistor characteristics apparatus , fet characteristics apparatus , half wave full wave and bridge rectifier apparatus , ripple factor apparatus , digital logic trainer , verification of truth table of logic gates using universal gates , flip flops using nand gates and ttl ics , four bit counters synchronous and asynchronous , four bit shift registers , encoder or multiplexer eight to one line , decoder or demultiplexer one to eight line , four bit analog to digital convertor , four bit digital to analog convertor , light intensity or phase control using scr or triac , scr commutation techniques , switching action of a bjt , single phase half wave full wave and fully controlled bridge rectifier or convertor using scrs , three phase half controlled bridge converter with r and rl load , three phase fully controlled bridge converter with r and rl load , single phase cycloconverter , instrumentation trainer using transducers , burdon tube pressure gauge trainer kit , strain gauge trainer kit with cantilever beam , lvdt trainer kit , speed measurement using photo electric and magnetic sensors , temperature sensors kit , measurement of water level using strain gauge , measurement of water level using capacitance transducer , ac servo speed torque characteristic trainer , dc servo motor speed torque characteristics trainer , stepper motor controller trainer , analog lab trainer bread board model , digital lab trainer bread board model , plc trainer , transmission line trainer abcd t and pi parameters ferranti effect load test , idmt over current relay testing kit electromechanical type , buchholz relay testing kit with compressor and oil , over voltage relay testing kit electromechanical type , over current and earth fault relay testing kit three phase static type , over current relay testing kit static type , measurement of power and power factor single phase and three phase , to study a typical bhk house wiring , four to one multiplexer and one to four demultiplexer , vapour compression refrigeration vcr test rig , water cooler setup , air conditioning test rig , domestic refrigerator , window air conditioner , split air conditioner , air cooler evaporative , tube cutter , pipe bender , flaring and swaging tool kit , reamer , brazing torch , manifold gauge set , vacuum pump , refrigerant recovery unit , refrigerant charging cylinder or electronic charging scale , refrigerant leak detector , digital clamp meter , digital thermometer , anemometer , tachometer , insulation material , refrigerants , recovery cylinders , weighing machine , electrical control panel , work benches , safety equipment

State Government

CTN :45411968

29 Jun, 2026 35.00 Lacs

Doda - Jammu And Kashmir

Tender For corrigendum : construction of engineering workshop and testing lab including procurement of lab instruments at dam site of bhep. - earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed ordinary rock, 1 meter from cutting edge, providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1 :3 (1 cement : 1 coarse sand : 3 graded stone aggregate 20 mm nominal size), steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level thermo-mechanically treated bars of grade fe-500d or more., filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m., centering and shuttering including strutting, propping etc. and removal of form work., lintel, beams, plinth beams, girders, bressumers and cantilevers., columns, pillars, piers, abutments, posts and struts., structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded, providing corrugated g. s. sheet roofing including vertical/curved surface fixed with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2, providing ridges or hips of width 60cm overall width plain g.s. sheets fixed with polymer coated j. or l hooks, bolts and nuts 8mm dia g.i. limpet and bitumen washers complete. 12.4.3 0.50 mm thick with zinc coating not less than 275 gram/m2, painting on g.s sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution., brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :cement mortar 1:6 ( 1 cement : 6 coarse sand), extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level, 15mm cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand), providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. with galvanized m.s. wire gauge with wire of dia 0.63 mm with 12 mm mild steel u beading, p/f in existing frames 30mm th

CTN :45324767

30 Jun, 2026 38.91 Lacs

Jhalrapatan - Rajasthan

Tender For corrigendum : procurement of various testing equipments used for transformers, protection relays, and circuit breakers of unit 1 and 2 katpp, jhalawar - various testing equipments for transformers, protection relays, and circuit breakers, transformer winding resistance meter(25a dc max. current injection, multiple autoand manually selectable measurement ranges: 200 to 2k ), earth ground resistance testing kit(measuring range 2 m to 10 k ), contact resistance measurement kit(test injection current max. 200a dc, resistance range 200 to 20 m ), relay testing kit (single phase)(output current range :- 0 to 30 a at 200 va continuously up to 60 a at 300 va for short duration, output voltage range :- 0 to 300 v at 150 va)

CTN :45336106

30 Jun, 2026 38.91 Lacs

Jhalawar - Rajasthan

Tender For corrigendum : procurement of various testing equipments used for transformers, protection relays, and circuit breakers of unit1 &amp 2 katpp, jhalawar - transformer winding resistance meter , (25a dc max. current injection, multiple auto and manually selectable measurement ranges: 200μω to 2κω. detailed specifications at annexure-1) , earth ground resistance testing kit , (measuring range 2 mω to 10 κω. detailed , specifications at annexure-l) , contact resistance measurement kit , (test injection current max. 200a dc, resistance range 200 μω to 20 m2. detailed specifications at annexure-i) , relay testing kit (single phase) , (output current range :- 0 to 30 a at 200 va continuously up to 60 a at 300 va for short duration, output voltage range : 0 to 300 v at 150 va. detailed specifications at annexure-i)

State Government

CTN :45586913

17 Jul, 2026 3.72 Crore

Ambala - Haryana

Tender For tender for supply of shifting of transmission lin - earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric typet_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge (lumsum) n/s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns (square or rectangular or polygonal in plain) ref no. 9.4 of pb csr2020 , reinforced cement concrete m_20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30 degree_60 degree bxa_32m , m60_3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , cpri vetting charges of monopoles , supply of stubs of 220kv m/c tower type nmd krr design (weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg ) , supply of tower body of 220kv m/c tower type nmd+0 mtr. extn. krr design (weight 16094.64 kg ht and 8678.83 kg ms ncluding gi nuts and bolts weight 1111.15 kg) , supply of tower body including extension of 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 17774.9 kg ht and 9697.23 kg ms ncluding gi nuts and bolts weight 1250.18 kg) , supply of stub template suitaible for 220kv m/c tower type nmd+3 mtr. extn. krr design (weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg) , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , anti climbing device (acd) with concertrina wire , acsr conductor zebra 0.4 sq inch (copper eq.) , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , bird guard , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , 24 fibre(dwsm) opgw fibre optic cable , opgw tension fitting complete , opgw vibration damper , opgw joint box , opgw down lead clamp , erection of towers , stringing and sagging of conductors , earth wire/opgw wire and accessories , including tack welding of bolts complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

State Government

CTN :45587085

17 Jul, 2026 5.08 Crore

Ambala - Haryana

Tender For tender for supply of raising height of transmission line -earth work in excavation of foundations of bridges culverts , buildings including handling of material with a combined lead of 15 metres dressing of bed and sides stacking the excavated soil from the edge of excavation and subsequent filling around a for ordinary gravel soil involving pick work l_r ref no 6.7 a of pb csr2020 , cement concrete 1_4_8 with stone aggregate 40mm gauge ii mixing by mechanical means using concrete mixer volumetric type t_r ref no. 10.11 b ii of pb csr 2020 , fixing , leveling , centering , alignment and setting of stubs complete in all respect satisfaction of engineer in charge lumsum n_s item , cold twisted deformed ribbed_tor steel bar bars fe 500 grade as per is _1786_2008 for rcc works , where not included in the complete rate of rcc including bending and placing in position in complete t_r ref no. 18.18 of pb csr2020 , shuttering for faces of concrete foundations and foundation beam and plinth beam (vertical or battering) ref no. 9.1 of pb csr2020 , centering and shuttering for columns square or rectangular or polygonal in plain ref no. 9.4 of pb csr2020 , reinforced cement concrete m-20 mechanically batch mixed using batch type concrete mixer as by is_1791 and vibrated by needle vibrate but excluding steel reinforcement centring and shuttering in foundation and plinth. ref no. 10.15 of pb csr2020 , extra for pumping charges of batch mix concrete _ready mix conrete work rmc ref pb csr 2020 item no. 10.46 , extra for using admixture in designed mix concrete ref pb csr 2020 item no. 10.50 , extra for carriage of rmc_batch mixed concrete with transit mixture beyond 1st km ref pb csr 2020 item no. 10.47 , design , testing , fabrication , supply , erection , foundation of 220 kv monpole pd 30degree-60degree bx__36m , m60-3000lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc complete in all respect , design , testing , fabrication , supply , erection including foundation of 220 kv monpole pd 30degree_60degree bxa_24m , m56_2500lg 8.8 grade bolts with all parts like cross arms , bolts and nuts , step bolts , u bolts , d shackles etc.complete in all respect. , cpri vetting charges of monopoles , supply of stubs of 220kv m_c tower type nmd krr design weight 1901.28kg ht and 720kg ms including gi nuts and bolts weight 39.36 kg , supply of tower body including extension of 220kv m_c tower type nmd plus 6 mtr. extn. krr design weight 18905.99 kg ht and 11081.5 kg ms ncluding gi nuts and bolts weight 1316.41 kg , supply of stub template suitaible for 220kv m/c tower type nmd plus 6 mtr. extn. krr design weight 1230.92 kg ms ncluding gi nuts and bolts weight 49.16 kg , earthing arrangement of towers complete in all respect , danger plate , number plate , phase plate set of 3 , circuit plate set of 2 , anti climbing device acd with concertrina wire , acsr conductor zebra 0.4 sq inch copper eq. , earth wire 7_3.15mm , 220kv 160kn polymer string insulator , double tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , single tension hardware fittings for acsr zebra conductor including arcing horns complete in all respect , straight joint for acsr zebra 0.4 sq. inch (copper eq.) , single tension hardware fitting suitaible for earth wire size 7_3.15mm , straight joint for earth wire size 7_3.15mm , vibration damper for acsr zebra 0.4 sq. inch (copper eq.) , vibration damper for earth wire size 7_3.15mm , bird guard set of 3 , ladder/step bolts with washers. , form box , span marker_globules day marking sphere , erection of towers , stringing and sagging of conductors , earth wire and accessories , including tack welding of bolts (about 750 bolts) complete in all respect , dismantlement of 02 towers including all necessary items and conductor including transportation of dismantled material from site to bbmb store panipat.

Central Government/Public Sector

CTN :45324560

23 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of