Latest release bearing Tenders | Government release bearing Tenders

Central Government/Public Sector

CTN :45166794

05 Jun, 2026 NA

Dankuni - West Bengal

Tender For supply & commissioning of 15/05t eot crane output shaft assembly. 01 set consists of following items - l-type bracket assly, l-bearing housing key, l-type bearing housing, bearing cover, wheel bearing -22314, shaft , wheel etc. preliminary and rough drawing attached for reference. wheel material en-09. item 02: set of idler wheel with accessories & bearing no.22314 (in assembled condition) as per drg.no. mm10557.11. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45167607

24 Jul, 2026 NA

Dankuni - West Bengal

Tender For supply & commissioning of 50/10t eot crane output shaft assembly consist- 01 no. lt wheel, 01 no. gear, 01 no. shaft, 02 nos bearing block, 04 nos bearing, 02 nos bearing cover, 04 nos distance piece, 01 no. lock plate, 02 nos key, 02 nos oil seal etc. with complete drawing. preliminary and rough drawing attached for reference. wheel, shaft and gear materials en9, bearing skf/fag. ndt and chemical test certificates issued by an nabl or govt. recognized lab must be submitted. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45166179

20 May, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of heavy duty solid rubber trolley wheel size: 12-inch x 3-inch steel rim equipped with 02 nos ball bearing (6205). make: acme/gkm lad/ pik india [ warranty period: 12 months after the date of delivery ]

corporations/Associations/Others

CTN :45166020

15 May, 2026 NA

Kalaburgi - Karnataka

Tender For auction sale of ms scrap w/w/o aluminum attachments,scrap seat frames and legs and luggage carriers,scrap armature tt/ll/eicher,scrap auto items grade-1,scrap auto items grade 2,scrap bearings,scrap auto electrical items,scrap spring steel blades all size,scrap rubber items consisting,scrap tread rubber powder and pieces,scrap stator,scrap clutch plates /clutch disc (ll/tt/eicher- round & fan type),scrap gear box bell housing,scrap rotor,scrap clutch covers assemblies/ pressure plate ll/tt/eicher),scrap brake drums,scrap paint drum 4/5 ltr capacity,scrap tubes full round with / without neck,scrap field coil,scrap flaps full round with cut,scrap empty grease barrel,scrap single/two/three seater cusion with rexine,scrap paints and thinner drums & bvc tin 20/25/30 ltr capacity,scrap fip noszzles ,elements , automiser body and spares,scrap waste/used/burnt engine oil with barrel 210 ltr. capacity,scrap sleeper bed cuashion w/w/o rexine,scrap water body assy / water pump (tata /ll//eicher),scrap viscous assy. with fan tt/ll,scrap brass synchro ring/ thrust washer/king pin bush,scrap turbo charger assy with exhaust manifold,scrap radiator core,tata/al/eicher,scrap inter cooler ,tata/al/eicher,scrap slack adjuster tata/al rh/lh (w/w/o gear),scrap vane pump tata / ll/ eicher/midi,scrap tie rod and push rod assy,scrap pressure plate back plate tt/ll,scrap power steering box assy. tt/ll,scrap rear cj shaft w/w/o cross bearing tt/ll,scrap axle shaft tata / leyland / eicher,scrap diesel tank 240/250/ 165/180 ltr capacity,scrap pvc/polythene scrap generated at trp,scrap crown pinion assy with carrier tata/leyland,scrap pure aluminum,scrap mechanical /hydralic jacks,scrap broken head light assy,scrap wheel disk without ring,scrap curing envelops & bag,scrap e.t.m small pipe,scrap returder corona vehicle,scrap wiper motor,scrap fly wheel,scrap shock absorber,scrap pvc coolant reserve tank,scrap fire extinguisher 1/2/4/6/9 kg

Central Government / Public Sector

CTN :45153104

03 Jun, 2026 NA

Secunderabad - Telangana

Tender For supply of light weight iron ladder trolley complete assembly with 4nos. of cast nylon wheels fitted with bearing of size:6305 fitted to both sides of wheel complete weight of ladder trolleyis 200 kgs approximate, complete light weight ladder trolley. trolley suitable for 25kv traction ohe maintenance as perdrg no.lwl/trolley/trd/ sc, wheel as per drgno:ladder trolley wheel/trd/sc/2013. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45139046

18 May, 2026 NA

Jalandhar - Punjab

Tender For supply of ball bearing , bearing ball jnl , nut brake rod , ignition switch , cam bush short , clutch cable , minor repair kit , clutch booster , starter motor , alternator assy , clutch plate , lock side window lh , release bearing , hose warm

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

Co-operative

CTN :45061846

16 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of hardware (miscellaneous store item) - gasket slake compound, holdtite compound 500gm, anabond 666 (gasket cement)100 gm, rustoline (500ml), m.seal, graphite powder, red lead best quality, white lead best quality, emery paste 400 gm.packing rough & fine, rubber embed flate belt all size (dunlop/goodyear), brasso-450 ml, areldite 1.800kg. set, emery wheel carborandum male all size /type, grinding wheel for angle grinder 4", 5", break liner hindustan ferrodo make 1/2"x 8", 1/2"x 10", 1/2/"x 12", 3/8" x 8", steel wire rope hempcore fmc 6/36 all size/type usha martin make with test certificate, forged steel u clamp size 19 mm, cotton waste coloured, oil seal, mykoda make all size, boiler gauge glass bishop make size 3/4" x 16", packing sleeve for gauge glass size 3/4" leader make, boiler gauge glass b-9 klinger (gasket reflex type), gasket for klinger guage glass b-9, stage jointing paste type- b red for turbine suitable upto 650 cent., toughend sight glass 12 mm x 120 mm to 125 mm, 12 mm x 127 mm to 130 mm, 12 mm/15mm x 180 mm, 1/2" x 5 ", 1/2" x 7", 1/2" x 7 " to 7 ", 1/2" x 8"/ 15mm x 200mm, 1/2"/20mm x 8 " to 9", 20 mm x 8.5"/210mm/215mm, 5/8" x 7 " to 7 ", 5/8" x 8 " to 9", woolen felt namda 10 mm (4fit x 8fit sheet), spring steel flat all size, roller chain & its spares upto 2"/all size, emery cloth (carborendum ajex only) rough, emery cloth (john okay) rough, emery cloth (carborendum ajex only) 80 no./120 no. fine, emery cloth (carborendum) john okay fine, emery tape 2" rough (carborendum ajex only), emery tape 2" rough (carborendum) john okay, emery tape 2" fine (carborendum ajex only), emery tape 2" fine( carborendum) john okay, high carbon steel hexa blade 1/2" x 12" (miranda make only), teflon tape (champion make) 3/4", camel hair belt size 3/8" x 4", 3/8"x 8", 3/8" x 10", 3/8" x 12", 1/2" x 10", prusion blue tube, v-belt (fenner ,dunlop,hilton,pix,endura hi tech, contitech etc isi mark all section/ all size), wedge belt (spb belt) (fenner ,dunlop,hilton,pix,endura hi tech, contitech etc isi mark all section/ all size), tyre coupling complete (unique make) all size, spare tyre for tyre coupling (unique make), s.s.sheet/ plate 304 quality with t.c. 3 mm thickness, 5 mm thickness, 10 mm thickness, graphite flake (course/fine)(english avarce make), gear coupling od-290mm, hub dia 150+, suitable for rbc (unique make), s.s.shaft 50mm to 65mm, s.s.shaft 85mm to 90mm, bearing sleeve jmc make (all type all section), plumber block jmc make (all type all section), plumber block smr make (all type all section), loctite 262 -50ml pack, 250ml pack, loctite 641 -50ml pack, p.p.rope with test certificate 1/2", 3/4", 1", tor flex gear coupling (unique make) tgf-102, od 185, pb-30, l-145, tgf-103, od 220, pb-40, l-175, fgc-106, no of hole 8, pcd 273mm for cane chopper, fgc-106, no of hole 8, pcd 273mm, 15 mm for m/c pump, brass rod upto 3" / all size, cerimic blanket for boiler insulation size 7.62x0.61x25mm thick with stand upto pressure 600degree centigrade, m.s.perforated sheet size 48"x96" 4mm hole size x 1/8" thinkness, gear coupling gc-106, od-320mm, max.bore 125mm, forge teeth en-8 body (unique make), chief engineer

Central Government And Public Sector

CTN :45160239

26 May, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of rolling stock - unserviceable and condemned one number coach ¿ sec 071437 wgsczac. the coach will be sold without excluded fitting (complete trolley along with complete wheel set and bearing with all brake rigging fitting and bmbc, dv complete, side buffers, side bearer bronze pieces, bio toilet tank, centre pivot pin of icf coaches, brake cylinder body mounted, as per annexure ¿ii(a) and electrical items as per annexure ¿i (alternator, pulley, fan, tube light, battery, rr box, regulator, rmpu unit, inverter(25kw) underslung) and icf bogie which are exists with coach, excluded fittings ( as pe letter no. mech/hq/010/010/warranty. dated: 23.09.2021 and icf bogies which are exist with coach to be handed over by purchaser to sse/c&w/durg. the coach will be handed over at marauda(mxa) as is where is basis, and after disposal of all cut off material, cutting area to be cleaned.

CTN :45151550

21 May, 2026 NA

Delhi - Delhi

Tender For supply of spring assy front , motor assy starting , clutch release bearing , poly vee belt , wheel cyl asyy , assy release bearing , repair kit tlr control valve , magnetic valve , oil seal

Release Bearing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors