Latest release valve Tenders | Government release valve Tenders

Corporations/Associations/Others

CTN :40955745

18 Jul, 2025 12.66 Lacs

Multi City - Karnataka

Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130

Central Government/Public Sector

CTN :40957265

22 Jul, 2025 NA

Katra - Jammu And Kashmir

Tender For supply of wire rope for quick release valve in lhb coaches. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :40950747

18 Jul, 2025 1.77 Crore

Srinagar - Jammu And Kashmir

Tender For supply, installation, testing and commissioning of 2 no. chillers with cooling tower in central ac plant of main hospital at skims soura - sitc of vfd based, ahri/ eurovent certified, water-cooled, mono/ twin screw type chiller of capacity not less than 100 tr with allied items. the item shall be complete and ready to be connected with main headers in the existing central air conditioning plant of skims soura. the chiller shall be accompanied with microprocessor based control panel with all safety, switch gears needed for safe, smooth and hassle-free operation. the job includes laying of foundation as per oem recommendation which shall be not less than 6 inches above the finished floor level. the technical specifications are further detailed in annexure b., sitc electric-motor driven centrifugal pump for condenser and chiller sides having a discharge of 15 to 18 litres per second, head of 30 metres, 1450 rpm. the technical specifications are furhter detailled in annexure b., insulated chilled water piping (nitrile rubber insulation)supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 kg/ cum density, thermal conductivity 0.037 w/mk or better at 20 deg mean temperature class o insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect.note: the pipes of sizes 150mm & below shall be m.s. c class as per is: 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per is: 3589, from minimum 6.35mm thick m.s. sheet for pipes upto 350 mm dia., 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulationthickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulation thickness), 100 mm (32mm nitrile insulationthickness), 80 mm (32mm nitrile insulation thickness), 65 mm (32mm nitrile insulationthickness), sitc of butterfly valves with di body double flanged construction with epdm coated disc with long pitch and pn 16 pressure rating as per is 13095 (1991), 250 mm , 150 mm , 125 mm , 100 mm , 80 mm , 65 mm , providing and fixing of aluminum cladding of 0.63 mm thick sheet to the insulated pipelines including bends, valves, fittings, etc. the job includes grooving, providing and fixing of screws, washers etc. as per is : 2676 - 1981, 300 mm (32mm nitrile insulation thickness), 250 mm (32mm nitrile insulation thickness), 150 mm (32mm nitrile insulationthickness), 125mm (32mm nitrile insulationthickness), 100 mm (32mm nitrile insulation thickness), 80 mm (32mm nitrile insulationthickness), 65 mm (32mmnitrile insulation thickness), sitc of ductile iron non-return valve of following size with allied jobs as per site requirement. the valve shall be conforming to is-5312. pressure rating : pn16, 150 mm , 125 mm , 100 mm , sitc of y-strainer (ci) flanged end, of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , 100 mm , 80 mm , sitc of balancing valve (ductile iron) of following size with allied jobs as per site requirement. pressure rating : pn16, 150 mm , 125 mm , sitc of t-strainer (c.i.) of following size with allied jobs as per site requirement. pressure rating : pn16, 250mm , sitc of fully stainless steel pressure gauge (bourdon beryllium copper, socket ss316l, case and bazel ss304), rugged construction with epdm blowback, safety glass. 0-40 kg/cm , dual display bar/psi or selectable, sitc in position the bi-metal dial thermometer temperature guage 4 dail size bsp (m) connection, ss case and ss wetted parts completer as required, sitc of air release valve of following size. air release valves shall be provided at all higher points in piping system for venting., 25 mm dia , sitc

Central Government/Public Sector

CTN :40956921

25 Jul, 2025 NA

Ajmer - Rajasthan

Tender For supply of quick release valve handle assly consisting of : [a ]

corporations/Associations/Others

CTN :40952697

10 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For nctps i operation ca dn cwph unit i overhauling of air release valves and their isolation valves in cwp discharge line of unit i removal and refixing of man hole covers of cooling water inlet tunnel near switch yard for facilitating tunnel works duri

CTN :40962981

07 Jul, 2025 NA

Poonch - Jammu And Kashmir

Tender For supply of spare parts of class b vehs military e e - drive end flange assy , temp sensor , flick valve assy , s a of relay valve , quic release valve , solenoid valve exhaust brake , s a of lined shoe , door lock assy rh , thrust washer

CTN :40964923

25 Jul, 2025 8.35 Lacs

Kangra - Himachal Pradesh

Tender For supply of hydraulic pump for dozer bd 80 , gear box with rotation change select lever , propeller shaft sm45 , oil cooler for dozer bd 80 , pressure release valve bd 80 0- 300 kg per cm2 , universal joint cross of dozer bd 80 , check valve and system protection valve of hydraulic circuit of dozer bd , radiator with mounting assembly of dozer bd , hydraulic hose pipes all types of dozer bd 80 , hydraulic oil tank of dozer bd 80 , cock valve hydraulic oil system of dozer bd 80 , rpm meter measure display 2000 to 7000 of dozer bd , water temp gauge measure display 0 to 120 degreec , engine oil pressure gauge display 0 to 120 degreec , fan belt of dozer bd 80 , coupling of transmission box assembly of dozer bd , mtg frame set of engine testing assembly length 6 meter , cooling fan with metallic of dozer bd 80 , hyd oil temp gauge measure gauge display 10 to 200 degree c , complete spares provide, fabr and instln cost include

CTN :40975392

28 Jul, 2025 NA

Mumbai - Maharashtra

Tender For supply of manufacture, testing & supply of air release valve double ball type, size 150 mm, pn-10 flanged type

CTN :40939021

16 Aug, 2025 8.35 Lacs

Kangra - Himachal Pradesh

Tender For supply of dozer bd 80 hydraulic pump , gear box with rotation change select lever , heavy truck universal joint material sm45c steel , oil cooler , hydraulic hose pipes 19mm , cooling fan material mild steel , radiator with fan complete assy material aluminium capacity 4 ltr , pressure release valve bd 80 to be able working on 300 kg per cm square , check valve and system protection valve to be able working on 0 to 300 kg per cmsquare , hyd tank 100 litre cap material stainless steel , propeller shaft , rpm meter measure display 2000 to 7000 , fan belt , cock valve , oil pressure gauge measure display 10 to 200 psi , hyd oil temp gauge measure display 10 to 200c , water temp gauge measure display 0 to 120c , coupling material stainless steel with rubber , mtg frame length 6mtr width 2 mtr height 1 mtr material stainless steel

Co-operative

CTN :40925323

10 Jul, 2025 NA

Badaun - Uttar Pradesh

Tender For supply of ci sluice valve for season 2025 26 - c.i.sluice valve, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size- 50 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-65 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-80 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-100 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-125 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-150 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-200 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-250 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-300 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-350 mm puri, kartar, sir, isi marked c.i. sluice valve having non rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-400 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-50 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-65 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-80 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-100 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-125 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-150 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-200 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-250 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-300 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-350 mm puri, kartar, sir, isi marked c.i. sluice valve having rising spindle of aisi-410 spindle ss working parts is- 14846:2000 size-400 mm puri, kartar, sir, c.i. butter fly valve, hand lever operated flanged end ductile iron with epoxy coated dis cast iron water tupe butter fly size- 50 mm sant make, hand lever operated flanged end ductile iron with epoxy coated dis cast iron water tupe butter fly size-65mm sant make, hand lever operated flanged end ductile iron with epoxy coated dis cast iron water tupe butter fly size- 80 mm sant make, hand lever operated flanged end ductile iron with epoxy coated dis cast iron water tupe butter fly size-100 mm sant make, hand lever operated flanged end ductile iron with epoxy coated dis cast iron water tupe butter fly size-125 mm sant make, hand lever operated flanged end ductile iron with epoxy coated dis cast iron water tupe butter fly size-150 mm sant make, hand lever operated flanged end ductile iron with epoxy coated dis cast iron water tupe butter fly size-200 mm sant make, hand lever operated flanged end ductile iron with epoxy coated dis cast i

Release Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector

corporations/Associations/Others

Co-operative