Get complete information related to latest Relief Valve Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Relief Valve Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Relief Valve Tenders.
Tender For supplying of water supply materials for yearly tender of the year of 2025-26 - extra blade (size 24x2x0.100) (rate as per market rate)bkr, teflon tape (tape size 12 mm x 10 mtr) (rate as per market rate)bkr, solvent cement (rate as per market rate)bkr, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron (di) conforming ti is-1865 with the latest amendments and of grade ggg 40/50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and valves and provision for corresponding dia ms flanges etc. complete for sluice valve of pn -10.0 and 80mm (item no. 2.23.2 page no. 22 volum-5 pwd sr-2023-24)bkr, size 80 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, size 65 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply and delivery at site of brand new best make non-return valve as per is 778/1984 with isi mark and as per its latest amendments size 50 mm (item no. 13.25.1 page no. 154 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni, outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 indoor type note 1) dol- direct online starter 2) s-d- star delta starter etc. complete. for outdoor 3 to 6 hp pumps (item no. 13.24.2 page no. 155 volum-5 pwd sr-2023-24)bkr, supply, installing, testing and commissioning common control panel consisting of the following incoming1 no set of phase indicating lamps with sfu of suitable rating 1 no, analog ammeter, 1 no analog voltmeter 1ni with phase selector switch, isolating switch outgoing for main electrical pump 1 no. mcb 1 no. dol of s/d starter suitable for respective hp 1 no. electrcal protection like single phase preventor. upto 3 hp pumps (item no. 13.23.1 page no. 154 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 135 lpm at 110 m equl 12 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, hp 6.50 - 155 lpm at 84 m equl 10 stg outlet dia - 2.00 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing submersible pump set of 150mm dia suitable for bore well and confirming to is 8034-2000, 3phase, ss bowl and impeller with low volt motor as per specifications, to work site as per necessary ammendments and instructions of engineer incharge of work. for 3 hp etc. complete 6.50 hp - 245 lpm at 70 m equl 8 stg outlet dia - 2.50 (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24)bkr, providing, single phase submersible pump sets of 100mm dia (4 inch) suitable for bore well confirming to is 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc. complete 2.00 hp/1.5kw 20 stg (item no. 13.8.8 page no. 150 volum-5 pwd sr-2023-24) bkr, supply of isi mark 175mm nominal bore, plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270-2001 and latest ammendments, electrical resistance welded steel tubes, material and conforming to is 1387-1993 and manufactured by basic open hearth electric or basic oxygen process in random length of 5-7m both ends. isi marking weighing 25.10kg/m.prices include collar-medium duty. (item no. 12.32 page no. 134 volum-5 pwd sr-2023-24)bkr, for 150 mm dia gi tee (item no. 11.9.11 page no. 130 volum-5 pwd sr-2023-24)bkr, for 125 mm dia gi tee (item no. 11.9.10 page no. 130 volum-5 pwd sr-2023-24)bkr, for 100 mm dia gi tee (item no. 11.9.9 page no. 130 volum-5 pwd sr-2023-24)bkr, for 80 mm dia gi tee (item no. 11.9.8 page no. 130 volum-5 pwd sr-2023-24)bkr, for 65 mm dia gi tee (item no. 11.9.7 page no. 130 volum-5 pwd sr-2023-24)bkr, for 50 mm dia gi socket (item no. 11.9.6 page no. 130 volum-5 pwd sr-2023-24)bkr, for 40 mm dia gi tee (item no. 11.9.5 page no. 130
Tender For supply of spares for airless spray pump make, model tiger 40.110. 1. sensing valve, part no: 61 110 0 08 00, qty - 25 nos, 2. service kit tiger control block, part no: 02 081 700 01, qty - 20 nos, 3. air safety valv e , part no: 20 043 000 00, qty -10 nos, 4. spring, part no: 05 001 011 19, qty - 50 nos, sl no: 1 to 4 makes one set. [ warranty period: 30 months after the date of delivery ]
Tender For supply of set of kit for safety valve containing 02 subkits i.e. 790024101 & 790024103 co ntaining 04 items & 08 nos. as per annexure attached. [ warranty period: 30 months after the date of delivery ]
Tender For supply of spare of apm (el-60) consisting of 23 items as per rdso drg no. wd-08096-s-01, alt.0 2, other technical requirement confirming to rdso specification wd-23- bmbs-2008 (rev.1) of septe mber-2015, read with latest amendment no.1 of sept.-2016. 1) tube port plug with o ring:kbi part no 760837 or similar qty 01 no. 2) o ring: kbi part no 738362 or similar, qty -01 no. 3) umbrella valve: k bi part no 772345 or similar qty 01 no. 4) indicator: kbi part no 771071 or similar, qty -01 no 5) o rin g:kbi part no. 756728 or similar, qty - 01 no 6) spring:kbi part no 771112 or similar, qty -01 no 7) sp ring:kbi part no 771630 or similar, qty -01 no 8) guide pin:kbi part no 771197 or similar, qty -01 no 9) o ring:kbi part no 789842-047 or similar, qty -02 no 10) piston:kbi part no 771113 or similar, qty - 01 no 11) o ring:kbi part no 783649-047 or similar, qty -01 no 12) check valve :kbi part no 771329- 047 or similar, qty -01 no 13) o ring kbi part no 789842023 or similar, qty -01 no 14) spring :kbi part no 771629 or similar, qty -01 no 15) o ring :kbi part no 719475 or similar, qty -01 no 16) diapragm: kbi part no 755749 or similar, qty -01 no 17) dust book:kbi part no 772308 or similar, qty -01 no 18) elastic stop nut:kbi part no 733883 or similar, qty -02 no 19) adjusting screw:kbi part no 782169 or s imilar, qty -01 no 20) lock nut:kbi part no 755896 or similar, qty -02 no 21) dust cap:kbi part no 77 6207 or similar, qty -01 no 22) ring gasket:kbi part no 772401 or similar, qty -01 no 23) ring gasket no 781215 or similar, qty - 02 no .i.e. one st consists of sr no 1 to 23 total 27 nos per set. wd-08096- s-01 spec:wd-23-bmbs-2008 [ warranty period: 30 months after the date of delivery ]
Tender For camc including consumables, repairs and replacement of defective parts of 1000 lpm ogp along with allied electro mechanical equipments along with operational charges for 01 year at gmc ah rajouri - comprehensive annual maintenance (camc) camc of oxygen generation plant ( airsep make 1000 lpm complete unit) which includes periodic servicing/maintenance and repairs of complete ogp unit (consisting of oxygen modules, air compressors (110 kw ingersoll rand make, air dryers (trident make), filtration assemblies, air tanks, oxygen tanks, interconnecting pipeline, control valves, indicators, sensors, pressure & purity meters, ups, electric panel, valve panel, and other allied accessories, etc.), (including topping/replacement of molecular sieve (zeolite/alumina/any other chemical as per requirement), copper pipeline from plant room upto patient beds, allied equipments such as main 630 amp. electric distribution cum changeover panel, mccbs/acbs, 400 kva avr (ae make), 250 kva avr (jaima make), 400 kva dg set sudhir power make (including replacement of batteries), amf panel, cabling, lightening arrestor, earthing, etc., other miscellaneous items of the plant room such as lighting, exhaust fans, ceiling fans, cctvs with inverter battery set, electric wiring and fittings, refilling of abc type fire extinguishers, other minor civil items, etc. the job also includes repair/replacement of defective pipeline from air compressors to air tanks/air dryers to psa tower in order to make it leak proof.the technicians for operation will be responsible for preventive maintenance, minor repairs/settings on a routine basis. major breakdowns of the plant equipment to be repaired by the firm through oems/open market workshops, etc. for maintaining the plant in working condition the firm will bear all charges of material including consumables, labour, transportation and all taxes as applicable.any other item of the oxygen plant not mentioned in the above description, but found necessary for the functioning of the plant, is deemed to be covered under the oc/camc contractfirst year, second year, third year, fourth year, fifth year, sixth year, seventh year, operational contract (oc)24x7 operation of 1000 lpm psa oxygen generation plant ( airsep make complete unit) and it s all allied equipments including power backup. the technicians for operation will also be responsible for preventive maintenance, minor repairs/settings on a routine basis. wages of the operators/technicians (3 nos + 1 no) for 01 year (12 months) having experience of similar work.first year, second year, third year, fourth year, fifth year, sixth year, seventh year
Tender For supply of overhauling kit for relay valve, fp-rv (ll46448/001) as per kbil part no.xki/kit/03582 for ccb brake syste m. one set consisting of 16 items as per annexure attached [ warranty period: 30 months after the date of delivery ]
Tender For supply of a set of 4 components for regulator assembly x- class locomotives as given below. item no (1). pull rod as per slm index no. x/5/3a/ m (item no 1) (material: is:1875/1992 cl 2 ) qty - 01 no/set item no (2). hand lever for regulator shaft as per drg no goc/x/lr-05-02160 qty - 01 no/set item no (3).regulator shaft as per drg no goc/x/sk-05-02150 qty - 01 no/set item no (4). valve rod for regulator assembly as per drg no goc/x/mp-05-01040 qt y - 01 no/set note 1. item no (1) to (4) consists of one set. 2. for equivalent material specification refer goc/x/spec-x-032 3. forging of items 1 to 4 should h ave one integral test piece and to be parted in presence of railway inspection authority and hand over for inspection before machining. [ warranty period: 30 months after the date of delivery ]