Latest remote monitoring Tenders | Government remote monitoring Tenders

Central Government/Public Sector

CTN :44843942

25 May, 2026 NA

Mughalsarai - Uttar Pradesh

Tender For corrigendum : supply, erection and commissioning of microprocessor-based control and fault diagnostic system with remote monitoring and analysis feature (mpcs) for 25 kv ac electric locomotives as per rdso specification no. elrs/spec/mpc- fds/0001/rev-3, april 2013 with latest amendment with all accessories including central and backup data logging & processing system. [ warranty period: 60 months after the dateof delivery ]

CTN :44842583

27 Apr, 2026 NA

West Singhbhum - Jharkhand

Tender For supply of class b & c surge protection device (spd) -type i & ii with visual indication and potential free contact to remote monitoring as per specification no. rdso/spn/165/2012 ver 3.0 or latest andiec standard 61643 for single line 230v ac application with handling lightning surges of 10/350 microseconds and switching surges of 8/20 microseconds .one set consists of 3 nos. of spd (2 no. of b class (l-n, n-e) and one no. of c class (l-n) all enclosed in a box with kema or vde certified as per latest iec 61643-11-2011 standard. class b &c surge protection device required with three modules only. installation of class b & c surge protection device should be as per the tan no:- sts/e/tan/3006, version- 3.0 ; dated:- 08.01.2025 (tan specs attached as annexure.) [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44819427

01 May, 2026 NA

Kota - Rajasthan

Tender For kota division-: provision of cctv cameras in da set room & panel room and remote monitoring device along with sim card in kota base power cars.

Central Government/Public Sector

CTN :44807274

13 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For supply, installation, testing & commissioning of da set 500kva (336kw), 750v,3-phase diesel alternator set, cpcb-iv complaint for lhb power car (without power andcontrol panel) conforming to rdso/pe/spec/ac/0084-2008 rev-1, with rcf annex.-a and icf amendment-1 along with manual isolating switch as per edml-208, and remote monitoring system as per mcf/rbl medts-0006, rev-0. the da set shall be with noise reduction features (without acoustic panels) as per spec. no.rdso/pe/ms/ac/0045-2008 rev-0, amdt-1 with rcf annex-c.packing instruction: as per standard packing. it should be ensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44676161

10 Apr, 2026 5.28 Crore

Barauni - Bihar

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - hurl sindri; service contract for implementation of online remote monitoring services for pac and co2 compressors at hurl sindri; as pr scope of work,repair, maintenance, and installation of plant/ systems/equipments (version 2) - hurl barauni; service contract for implementation of online remote monitoring services for pac and co2 compressors at hurl barauni; as pr scope of work

CTN :43994934

15 Apr, 2026 12.74 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin wireman tradeat iti kubernagar, gujarat, india - low voltage control and systems., residential and small business systems, electrical machine trainer, motor-generator (ac to dc), motor generator (dc to ac) set, linear i.c. trainer, digital i.c. trainer, grid connected industrial photovoltaic training system three phase system, component of typical small hydro power, component of typical water mill, off-grid photovoltaic training system with solar pump system single phase system, building control systems and automation, industrial control system and automation, 20 kv voltage distribution and grid control system, testing lab, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, low voltage control and systems., residential and small business systems, electrical machine trainer, motor-generator (ac to dc), motor generator (dc to ac) set, linear i.c. trainer, digital i.c. trainer, grid connected industrial photovoltaic training system three phase system, component of typical small hydro power, component of typical water mill, off-grid photovoltaic training system with solar pump system single phase system, building control systems and automation, industrial control system and automation, 20 kv voltage distribution and grid control system, testing lab, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester

CTN :43994967

15 Apr, 2026 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : invites for e-bids. from original equipment manufacturers (oems) and/or authorised channel partners (cps) supply of goods, tools &equipmentforan international standard itotin electrician tradeat iti vyara, gujarat, india - electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and plate, fixing bolts, foundation bolts and flexible coupling. induction motor rating: dc shunt generator rating: induction motor rating: dc shunt generator rating:, motor generator (dc to ac) set consisting of-shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bed plate, fixing bolts, foundation bolts and flexible coupling. shunt motor rating: ac generator rating:, linear i.c. trainer, digital i.c. trainer, component of typical small hydro power, component of typical water mill, low voltage control and systems. with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, residential and small business systems with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, building control systems and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, industrial control system and automation with suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, solar system lab suitable tables, circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the experiments by the student, training system predictive maintenance and condition monitoring of electric drives, electric vehicle motors and battery training & test bench, industrial electrical testing facility with circuits, power supply, control units, software, hardware, wiring, switches ready to conduct the testing by the student, ar-vr training set up., portable electric drill machine, pillar electric drill machine, outside micrometer, motorized bench grinder, rawl plug tool & bit, hydrometer, thermometer, soldering iron, copper bit soldering iron, de soldering gun, table vice, ohm meter; series type & shunt type, stock and dies conduit, multi meter (analog), digital multi meter, a.c. voltmeter, milli voltmeter, d.c. milliammeter, ammeter, a.c. ammeter, a.c. ammeter, kilo wattmeter, a.c. energy meter, power factor meter, frequency meter (analog + digital), tachometer with stopwatch, current transformer primary-, potential transformer, growler internal+ external, tong tester / clamp meter, megger, wheat stone bridge with galvanometer & battery 2 nos, earth tester, electrical machine trainer suitable for demonstrating the construction and functioning of different types of dc machines and ac machines (single phase and three phases). should be fitted with friction brake arrangement, dynamometer, and instrument panel and power supply unit., motor-generator (ac to dc) consisting of: squirrel cage induction motor with star-delta starter and directly coupled to dc shunt generator and switch board mounted with regulator, air breaker, ammeter, voltmeter, knife blade switches and fuses, set complete with case iron and pl

Central Government / Public Sector

CTN :44736116

13 Apr, 2026 NA

Noida - Uttar Pradesh

Tender For supply of stationary items for plho noida c c - rubber band big assorted size of nylon in packing of 50gm each size 4 inch as per technical specifications , rubber soft eraser, non dust eraser, quantity product from hindustan pencil ltd of make apsara box means 20 pieces per box as per technical specifications , binder clip 19 mm 19 mm clip of make yihai or sdi box means 12 clips per box as per technical specifications , binder clip 25 mm 25 mm clip of make yihai or sdi box means 12 clips per box as per technical specifications , binder clip 32 mm 32 mm clip of make yihai or sdibox means 12 clips per box as per technical specifications , cello tape transparent 2 inch cello tape of make stone age or wonder as per technical specifications , transparent flag multi colour , 25 flags each of 5 colours per pad, make oddy, ea equal to 1 pad as per technical specifications , glue stik 15 gm of make fevistick or pidilight. ea means one number as per technical specifications , highlighter camlin permanent highlighter pen, bullet tip, dry time 5 second, ink capacity 8 ml as per technical specifications , permanent marker of make camlin or luxor black as per technical specifications , scissor size 8 inch of make sdi or godrej ea means one number as per technical specifications , sharpener maped make metal as per technical specifications , water flask milton or equivlent make 1001 1100 ml, outer body plastic, inner body refill with vaccum conforming is 3702, as per ci 3.1.1. of is 7708 as per technical specifications , photocopy paper a4 size red packing, 500 sheets per packet, original mill pack copier, gsm 80 size of paper, 210mm x 297mm

Central Government/Public Sector

CTN :44746356

27 Apr, 2026 NA

Agra - Uttar Pradesh

Tender For provision of remote monitoring of cctv of 04 stations (agc, rkm, mtj & af) at drm campus of agra division.

Central Government/Public Sector

CTN :44754345

16 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of class "b" and "c" surge protection device (spd) type i & ii with visual indication and potential free contact to remote monitoring as per rdso spec no. rdso/spn/165/2012 version 3.0 or latest and iec standard 61643 for signals line 230vac application with handling lightning surges of 8/20 microseconds. one set consists of 3 nos. of spd (two nos. of b class (l-n,l-e) and one no.of c class (l-n) all enclosed in a box with kema or vde certified as per latest iec 61643-11-2011 standard class b & c surge protection device required with three modules. make- obo/phoenix/betterman/dehn or similar. [ warranty period: 30 months after the date of delivery ]

Remote Monitoring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector