Latest remote control bell Tenders | Government remote control bell Tenders

State Government

CTN :45173727

28 May, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : ac coil capacitor bank switch cantrol coil, module for capacitor switch, tripping coil essun 30 volt dc, length of coil 40 mm , i.d 26 mm o.d. 50 mm resitance 3.3 ohm tolrance ± 0.1 ohm, weight coil 290 gram, tripping coil megawin 30 volt dc, length of coil 93 (with brass tube of 95 mm) id 16 mm o.d. 41 mm resistance 4.2 ohm tolrance ± 0.1 ohm weight coil 505 gram overall length with plunger 141 mm., tripping coil popular 30 volt dc., tripping coil rr ispat 30 volt dc., breather 5 kg., breather 3 kg., transformer cork sheet 10 mm., bhel make 11 kv top insulator., bhel make 11 kv bottom insulator., 33 kv insulating pull road 11 kv bhel make vcb., drive road 11 kv bhel., drive road 11 kv magawin.

Central Government/Public Sector

CTN :45197122

02 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : providing of calibration services - electrical, as per technical specifications; voltage, current, power (ac/dc), resistance, as per technical specifications; nabl labs; buyer premises (onsite)

Central Government/Public Sector

CTN :45302554

13 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of insulation resistance meter

Central Government/Public Sector

CTN :45262452

28 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For corrigendum : digital remote repeater wo-tgtransco - digital remote repeater for windingtemp.indicator having range: (0 to 150 degree c)input type:4-20 ma, output-minimum 01 no. 4-20 ma, and minimum 01 no. rs 485, modbus., digital remote repeater for oiltemp.indicator having range: (0 to 150 degree c)input type:4-20 ma, output-minimum 01 no. 4-20 ma, and minimum 01 no. rs 485, modbus., direct digital remote repeater for tap position indicator of oltc, having range: suitable for up to35 position input type: 3 wire resistance o/p of oltc mdu, output-minimum 01 no. 4-20 ma, and minimum 01 no. rs 485, modbus.

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

corporations/Associations/Others

CTN :45320320

11 Jun, 2026 23.10 Lacs

Sonbhadra - Uttar Pradesh

Tender For supply of modules chp a , overhauling, servicing of coal handling control room switch gear section b main bus chp a , overhauling,servicing of coal handling control room switch gear section b breaker ic, og, chp a , overhauling,servicing of coal handling control room switch gear section b panels chp a , overhauling,servicing of coal handling control room switch gear section b russian control modules chp a , overhauling,servicing of coal handling main building transfer point switch gear main bus transfer point section a, chp a , overhauling,servicing of coal handling main building transfer point of panels, chp a , overhauling,servicing of coal handling main building transfer point of russian control modules, chp a , overhauling,servicing of coal handling main building transfer point of switch gear main bus transfer point section. b, chp a , overhauling, servicing of coal handling main building transfer point of panels, chp a. , overhauling,servicing of wagon tippler, switch gear electrical wagon pusher sg room of russian breaker. , overhauling,servicing of wagon tippler, switch gear electrical wagon pusher sg room of russian resistance boxes a chp. , overhauling,servicing of wt sg sg room of wagon tippler resistance boxes, a chp. , overhauling,servicing of 0.4 kv swg sectiona, b, c, fhd swg section a, b and old and new stacker, reclaimer switch gear of chp a , overhauling, servicing of l.t. modules,panel of breaker ,ic coupler of chp, control room of bchp , overhauling,servicing of lt modules panel of breaker ,og feeder of chp, control room of bchp , overhauling,servicing of lt modules,panel of breaker , ic coupler of fuel handling control room of bchp , overhauling,servicing of lt modules,panel of breaker ,og feeder of fuel, control room of bchp , overhauling,servicing of old stacker re claimer panel , overhauling,servicing of old stacker reclaimer resistance box of bchp , overhauling,servicing of old stacker reclaimer control panel of bchp , overhauling,servicing of new stacker reclaimer panel , overhauling,servicing of newstacker reclaimer resistance box of bchp , overhauling,servicing of newstacker reclaimer control panel of bchp , servicing,overhauling and breakdown maintenances of mimic plant of chp. , overhauling ,servicing of tippler switch gear of b chp. , overhauling,servicing of wagon tippler room operator panel on off of bchp , overhauling,servicing of wagon tippler room incoming power panel of bchp , overhauling,servicing of wagon tippler room control modules of bchp , overhauling or servicing of wagon tippler room resistance box of bchp , overhauling or servicing of wagon tippler screw pad overhauling of bchp. , overhauling or servicing of wagon tippler over travel limit switch otls overhauling of bchp. , overhauling or servicing of wagon tippler mcc panel of tipper 11a, 11b, 12a, 12b of bchp.

State Government

CTN :45320852

15 Jun, 2026 1.06 Crore

Delhi - Delhi

Tender For supply of transformer winding resistance meter (q3)

Central Government And Public Sector

CTN :45308065

08 Jun, 2026 NA

Krishna - Andhra Pradesh

Tender For supply of top seal n type roll size - 8* x 20 mtrs for securing hood of electric loco.as per followingspecification: i)visual tape free wrinkle & visual defect ii) dimension: a) width: 8 inch b) length: 20 mtrs c)thickness: 0-18-0.30mmiv)tansile strength kg (25-30 minimum) v) elongation (%) : 5 minimum vi) adhesive to steel (g/2.5cm): 3000mini. vii)water permeability: not more than two drops after two hours. viii) weather resistance to pass 200 hrs as per saej1900 in std xenon annual rate contract base should pass thetest. ix) oil resistance should pass the test.x) alkali resistance shouldpass the test. xi) mvpt as per ind/me/790 (a) the moisture absorption should not be more than 200 g/m square/24hrs at 40 degree c.make/brand- permacel, savvy, johnson & johnson or similar accepted make: krishna trading corporation [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45318304

08 Jun, 2026 NA

Pune - Maharashtra

Tender For supply of lv2icvs 8340-001952 773-93-sb105 tent canvas , z1r72 misc-tadiran-2090-09252-00 h-250u hand set , lv1r90 188.35.001sb gasket , lv1r72 mto 1.35.017sb operating hose , lv2icvs 2540400001678 675-60sb-130 cushion , lv1r72 172.95.263 guard disk for removing instlofwheel , lv1r90 188.31.073sb vacuum and pressure relief valve , lv1r90 tu.b.25.7529.001-87 resistance temp gauge sending unit p-i , lv1r90 cqa hv 5.32.041 hose connection , lv1r72 175.95.011sb wrench

CTN :45138683

27 May, 2026 1.26 Crore

Bathinda - Punjab

Tender For bid to ras corrigendum : supply and construction of superstructure of ug coy comd post , supply and construction material , supply and construction electronic , supply and construction of earthing items , supply and construction of lightening conductor , supply and construction of furniture items - cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1969 (make-birla gold/ambuja /ultratech/acc/jk/dalmiya) , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , hard core 63-90 mm , stone boulder 9 to 12" , mild steel bars of size 16 mm and above dia conforming to is 432 (part (1) 1982 (make tata/sail/jsw) , mild steel bars of size 12 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 10mm dia conforming to 15 432 (part 1) 1982 (make tata/sail/jsw) , mild steel bars of size 8 mm and above dia conforming to is 432 (part 1) 1982 (make tata/sail/jsw) , water proofing compound confirming to is 2645-2003 (make pidilite/dr fixit/fevicol) , gl binding wire (tata/sail/jsw) , wooden plank for shuttering lind class wood of size 3.0x0.30x0.026 , wooden scantling various size , steel props of size 2 mtr long. 80 mm dia, adjustable upto 4 mtr height nad as directed , nails various sizes , (a) ms rhs of size 100x50x45 , (b) ms rhs of size 50x25x2.9 , (c) ms rhs of size 96x48x3.2 , (d) ms flat 40x5 mm thick for wind the tata/sail.jsw , (e) ms plate of size 10mm thick , idi ms plate of size 8mm thick , 10) m5 angle of size 40x40xň for cleat , (f) ms plate of size 12mm thick , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia mats including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete ali as directed , ppgi sheet, 0.55 mm thick of size 10ft x3 ft of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthetic camoglage paint over one coat of red oxide primer of make berger/asian/nerolac) , ppgi noge sheet of 0.50mm thick of 90cm wide of make sail/tata/jindal incl treating galvanised surface with mordant solution and two coat of synthelic camoglage paint over one coat of red oxide primer of make(berger/asian/nerolac) , self taping steel screw half thread with rawl plag of 1 1/2 size (is! marked) (100 nos/pkt) , door size (2000x1000mm double wal ms sheet for door (2mm thick) frame (chowkat) made of steel equal angle iron 55x55x6mm (151 grade) shutter made up of steel equal angie iron frame 35x35x5mm (151 grade) flat con for stiles (75mm width and 5mm thick) holdfast 450mm long welded either side of anglle iron frame including hinges (06 nos) , tower bolt 150mm long 104 nos: bow handles (04 nos) and sliding bolt 12mm dia 300 mm long with lockung arrangernent complete both side and openable outside complete along the wall. , note the door shall be made of steel suitable painted in olive green colour with two coats of red oxide primer , ventilator with grill of size (1500 x 600mm) ventilator (loop hole) frame for steel angle of size 35x35x5mm (1s1 grade) gral made of tmt bar 12mm dia with weiding the items shall be suitably painted with weather resistance and fire prouf paint over one coat of red uxide primer (make tata/spat/sail , acrylic emulsion paint of approved brand on new concrete surface of make berger/asian/nerolag , painting brush 4"(15) marked) , bila white wall care putty (water resistant white cement based putty) for concrete/mortar walls/ceiling make jk putty birla white , cerment hased paint snowcemi make berger/nemlac/asian) , o bound distemper (washable quality) of proprietary brand of (make , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make (johnson kajana orient) tist quality confrorning to 15 150-2006 , white cement confirming to 18 8042/1969 (make acc/birla white ambuja) , curtain arrangement drapery and ind made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type end

Remote Control Bell Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors