Latest remote control desk Tenders | Government remote control desk Tenders

State Government

CTN :45178645

28 May, 2026 4.00 Lacs

Vidisha - Madhya Pradesh

Tender For corrigendum : oti meter, round shap oil temperature meter 0 to 120 with 5 mtr capulary make ecko/and other equavalent., wti meter, round shap winding temperature meter 0 to 120 with 5 mtr capulary make ecko/and other equavalent., power clamp, for power bi- metelic clamp of brass flat (50*50*10mm)., ac voltage meter, ac volt meter rang 0 to 300 volt hz. 50-60 , dc voltage meter, ac volt meter rang 0 to 50 volt. , dc amp meter, dc amp meter for battery charger 30v/0-20 amp., bridge rectifier, kbpc 3510, 1 kv 35a single phase bridge rectifier diode., on-off handel, for control pannel. baimetallic clamp for ct., kit-kit unit fuse, 16 amp for ac dc volt. , mcb, 16 amp for panel.

State Government

CTN :45303639

06 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates of plant and machinery and materials category items for preparation/amendment of schedule of rate for the year 2026. - m 1055 - pumps supplying submersible pump sets confirming to is 8034 and motor confirming to is 9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon/ fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/ double run shall be provided with each pump., submersible pump set 100 mm dia (with polypropylene/ noryl impeller) up to 20 stages 1 h.p. , 1.5 hp, 2 hp, 2.5 hp, 3.0 hp, 4.0 hp, 5.0 hp, submersible pump 150 mm dia (with bronze/ss impeller) up to 8 stages, 1.5 hp, 2.0 hp, 3.0 hp, 4.0 hp, 5.0 hp, 6.0 hp, 7.5 hp, m 1056 - pressure guage providing fabricating, testing and commisioning pressure vessel fabricating in m.s plate on providing foundation including epoxy paint, pressure gauge (100 mm dia), pressure gauge (150 mm dia), vacuum / combination gauge, m 1057 - lifting equipment chain pulley block supplying triple spur gear type chain pulley block suitable for capacity as below with 3 m lift complete with load chain and hand chain suitable for above lift, tested to 50% over load as per is 3832 carrying isi mark., 1 tonne capacity, 2 tonne capacity, 3 tonne capacity, electric operated circular or rectangular travelling crane (single girder) supplying single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class ii duty, all three motions electrically operated by suitable rating motor ip 54, control panel and down pendant control block., 5 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, 7.5 tonne capacity, above 6 m upto 8 m span, above 8 m up to 10 m span, 10 tonne capacity, above 6 m up to 8 m span, above 8 m up to 10 m span, m 1058 - lightening arrester, ab switch, insulators, lightening arrestor supplying, erecting approved make thyrite type lightening arrestor suitable for h.t. supply with necessary ancillary material complete on provided cross arm and connected to overhead line., suitable for 11 kv supply, distribution class, suitable for 22 kv supply, distribution class, suitable for 33 kv supply, station class, disc insulator. supplying, erecting porcelain disc type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, pin insulator supplying, erecting porcelain pin type insulators with hardware fittings suitable for h.t. overhead line complete erected with nuts and bolts on provided cross arm, suitable for 11kv line, suitable for 33kv line, air break switch without earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for operating handle erected on extended square shaft. the operating handle provided with lock and key at suitable height from ground with necessary clamps, suitable for 11kv line, rocking / tilting type, rotating type, suitable for 33kv line, rocking / tilting type, rotating type, air break switch with earth switch supplying, erecting approved make h.t. outdoor type gang operated air break triple pole switch with earth switch of required capacity with 3 post / pin type insulator per phase , mounted in horizontal or vertical position on provided cross arm with adequate length of g.i. pipe for op

CTN :45197592

28 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of terminal block 4 sqmm screw connector type , fuse , 6.3a , 5 x 20 , terminal block 4 sqmm , control relay glass type 2c/ o 110vac with base , mcb 2 pole 10 a c curve , pilot lamp white , indication lamp 110v ac 22mm diameter (red) , indication lamp 110v ac 22mm diameter (amber) , control cable 8 x 1.5 sqmm pvc insulated 80 mtr , limit switch , direct drive motor , controller transformer 1p 300va 380// 110v , stainless steel ss304 encl 500x500x210(control panel) , proximity sensor , luna light skewing system steel structure assembly , power cable 3 x 2.5 sqmm pvc insulated 15 mtr , joystick controller 2 direction 22mm diameter , electric motor direct drive controller , main switch disconnector 3 pole 25a , stainless steel ss304 encl 175x150x150(operating station)

CTN :45320055

29 May, 2026 5.92 Lacs

Multi City - Multi State

Tender For addition of stand by hvac secondary pumps with variable frequency drive based control panel in the existing centralized ac plant with associated modification in chilled water line header at administrative building complex supreme court of india new delhisubwork/packages:improvement of electrical supply to pumps of hvac, fire fighting etc at administrative building complex

CTN :43322060

26 May, 2026 NA

Gurgaon - Haryana

Tender For bid to ras supply of ductable ac 8.5 tr , refrigerant piping as above for 8.5 tr machine , drain piping 25 mm dia , supply and fabrication of ms structure to support the machine, outdoor and ducting , control cable , power cable 4c x 6 sqmm , power cable 4c x 50 sqmm , ms cable tray 50 x 100 x 50 x 1.6 mm , 22g oval ducting , supply of fire-retardant flexible canvass connections , supply of anodized extruded aluminium supply air double louver grills with volume control damper , supply of electrical panel with 1 no suitable capacity incomer and 6 nos suitable rating outgoing feeder for ductable units , providing of outdoor stands duly painted , providing of ss 304 drain tray under the ductable units , supply of portable air conditioner capacity 1 tr , installation testing and commissioning charges , freight charges including packing forwarding, transportation, insurance and unloading of material

Central Government / Public Sector

CTN :45210801

08 Jun, 2026 NA

Secunderabad - Telangana

Tender For supply of hrc cylindrical fuse link 4a (without holder), 1.2 kv size 8x50mm for voltage control asper sr.no.13 and item code f01 to f06 and place of installation s1 f90 to s1 f96 of bill of material as per rdso letter el/7.1.108/mssbc dt: 17/09/2021 conforming to rdso spec no. rdso/pe/spec/ac/0184-2015(rev-1) suitable for lhb type ac coaches switch board cabinet and hog panel in lslrd (s1f-90, s1f-91, s1f-93, s1f-94, sif-95, sif-96) accepted makes:1) siba 2) eaton bussman 3) ferraz (4) wohner only as per bill of material as per rdso letter el/7.1.108/mssbc dt: 17/09/2021 [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45116831

29 May, 2026 NA

Secunderabad - Telangana

Tender For design, fabrication, supply, testing & commissioning of testing control panel for ac auxiliary machines, along with accessories as per annexure-a enclosed. [ warranty period: 24 months after the date of delivery ]

State Government

CTN :45178636

28 May, 2026 80.00 Lacs

Guna - Madhya Pradesh

Tender For rate contract for supply local purchase award for purchase of various electrical equipment/goods and safety appliances under jurisdiction of general manager (ondm) mpmkvvcl,guna - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing for ptr suitable for 20 mm stud, 11 kv bushing for ptr suit

Central Government/Public Sector

CTN :45210737

15 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For supply of tower type cab air conditioning unit (2.0 tr min) along with control panel, mounting frame and anchoring arrangement to coach body and all the accessories generally confirming to specification no-icf/elec/110 (latest). note-mounting dimensions must not exceed 1356 mm (height) x 916 mm (width) x 350 mm (depth) to replace the existing cab ac. packing instructions:-as per standard packing, it should beensured that item should not rub during transportation. the item should be packed with adequate strength. transit damage, if any, shall be at the cost of supplier.. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45139013

01 Jun, 2026 NA

Hubli - Karnataka

Tender For supply item description: design supply, installation, commissioning and testing of 3 phase traction motor testing plant along with vvvf drive for testing on no load a.c and d.c traction motor of capacity 600 to 1600 hp, 750 v to 1500v used in ac/dc emus. the set shall be capable of giving dc output of 750amps at 150v (varies between 0 to 150v). control panel with various switchgears, data acquisition to read, display, storage & print out facility (the panel is suitable for testing of 4 motors at a time in automode and individually in manual mode for light load testing. the output ripple shall be within 5% approx. and the unit shall be suitable for operation on ac, 3 phase, 380/440v, 50 hz supply with neutral earthed) asper enclosed specification [ warranty period: 30 months after the date of delivery ]

Remote Control Desk Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector