Tender For supply & installation of portable balancer with standard accessories. specifications:- 1) power supply: 230v, 50hz (+/-) 10%, 2) sensor: piezo-electronic accelerometer with built-in charge amplifier in stainless steel body, 3) speed range: 500 -6000 rpm, 4) indicated parameters: vibration, velocity, displacement and rotor rpm on digital lcd display. make:baseline technology (model-portable balancer 1000d) or similar. note: firm shall mention hsn code of the item and supply of material with calibration certificate. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of procurement of sound powered telephone system and public address system with talk back for vc11205 d d - nwt flush type console mounting telephone along with 2m cable with handset , nwt bulkhead mounting cabin type telephone with handset , nwt relay box , nwt audio device electronic siren , wt bulkhead mounting type telephone with handset , wt headset for wt bulkhead mounting telephone , wt relay box with integral audio-visual device , wt 7-way junction box , installation and commissioning material including anti vibration mounts, cable connectors, fasteners, directory plates etc. , manufacturers recommended on board spares , drawings and documentation , training as per tts , service support for stw, commissioning, trials hats. , main unit public address with talk back and loud hailer, ip23 with sre , flush mounted remotecontroller on bridge console, ip23 , gooseneck type microphone , headset with microphone for main unit, ip23 , 4w, nwt speakers, ip23 , 10w, horn speaker, ip44 , 10w, horn speaker, ip56 , flasher, ip44 , junction box, ip44 , talk back station, wt, ip 44 , talk back station, wt, ip 56 , talk back station, nwt, ip 23 for switchboard and mcr , weatherproof headset with microphone for ip44 talk back stations , weatherproof headset with microphone for ip56 talk back stations , headset with microphone for ip23 talk back station for switchboard and mcr , 10w, horn speaker for talk back stations, ip44 , 10w, horn speaker talk back stations, ip56 , 10w, horn speaker for talk back station, ip23 for switchboard and mcr , 30w, horn speaker for loud hailer on bridge top, ip67 , installation and commissioning material including anti vibration mounts, cable connectors, fasteners, directory plates etc , manufacturers recommended on board spares , training as per tts , service support for stw, commissioning, trials hats. ) /bid number : gem/2025/b/6628481 * /dated: 30-08-2025 & & / bid document 1 / 33
Tender For supply, installation, testing and commis [supply, installation, testing and commissioning of wall mount inverter type 2.0 ton 5 star rating ac (variable speed), compressor type- high eert win rotary bldc, rated iseer value 5.25 & above, ecofriendly refrigerant, cooling coil & condenser coil material copper, input power supply 230 v ac (+/- 10 %),50 hz, with one set heavy duty ms stand suitable for outdoor unit note : (1) require minimum 10 years warranty on compressor & 5 year warranty require on all type of electronic pcb circuit. (2) make: voltas, carrier, samsung, lg ,bluestar, haier, ifb, hitachi note:oem/ authorized dealer proof of purchase, warranty certificate & test report to be submitted along with the material supplied.]
Tender For tender for the work of providing/supplying of spare materials to 220kv/66kv/11kv/6.6kv substations at harohalli and tataguni 220kv receiving stations coming under ee k-o&m-2 division harohalli (emergency and essential work) - phase plates (set of 6 per tower), number plates/circuit plates, danger plates/caution plates (1 no. per tower), anticlimbing device gi barbed wire (12 mtr/kg), telescopic ladder aluminium 6 m height (approved make), hydraulic crimping tool upto 1000 sq mm (approved make), line live tester, rubber hand gloves 15 kv tested, insulation tester digital type (megger) 2.5 kv - 5 kv (approved make), sf6 gas leak detector (approved make), multimeter electronic type (approved make), rubber apron, rubber shoes knee height, grounding sticks extendable upto 18 ft - 3 nos. of each 6 ft sticks of 3 phase r, y, b (3 nos. of 1 set), manilla rope 1inch (one bundle of 100 m), safety belts with accessories (approved make), safety helmet with rachet, hydraulic bolt cutter/wire cutter upto drake acsr conductor with bits for cuttings (approved make), lt line spacer for 4 wire, insulated gos operating handle/rod for redesigned & modified gos, tubular telescopic tree pruner comprising of 2 sticks weight less than 3 kgs blade length 16inch, thickness 1.5 mm length of the blade and rod 6.5 mtr circumference of the rod 120mm rod material frp or aluminum. insulation shall be provided if aluminum material is used for rod., ldpe safety cone with (bwssb) logo, c-type wedge connectors drake to drake acsr conductor, ct clamp for single drake, drake 4 hole paddle acsr conductor 895a, p.g. clamps for drake, pad clamps for drake, sf6 gas filling kit/adapter, bamboo ladder (hight of 10mtr), bamboo ladder (hight of 06mtr), arc flash suit, 40kal, 3layer (approved make), voltage transformer 220kv rating, single phase, oil filled, outdoor type vt with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specification. (approved make) voltage ratio 220 kv/3 / 110 v/3 - 110 v/3 accuracy class 0.2, insulation level 460/1050kv, creepage greater than 6125, current transformers oil filled current transformer 0.2s class with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specifications, (approved make) 220 kv class 1200-800-400-300/1-1-1 a plus 2 cores of 1200/1 a, voltage transformer 66kv rating, single phase, oil filled, outdoor type vt with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specification. (approved make) voltage ratio 66 kv/3 / 110 v/3 - 110 v/3 - 110 v/3, current transformers oil filled current transformer 0.2s class with terminal connector suitable for al. tube/conductor with marshalling box etc., complete as per technical specifications, (approved make) 66 kv class ct ratio 400-200 / 1-1-1 a (for line 1and 2) (ii and iii stage supply), lightning (surge) arrestor 198 kv metal oxide with surge counter arrestor class station medium duty (sm) - discharge class 3 - for overhead line, transformer ug cable, lightning (surge) arrestor 60 kv metal oxide with surge counter arrestor class discharge class 3 (station medium duty (sm) - for transformer & ug cable, solid core bus post insulator 220 kv, solid core bus post insulator 66 kv, a 220 kv, 120 kn tension type porcelain long rod insulators with sectional length - 2175/2320 mm, a 66 kv, 120 kn tension type porcelain long rod insulators with sectional length - 725 mm
Tender For 25 mm thick premix carpeting with material bituminous on existing bm course from c type to guest house and b type to guest house t junction at bbau - providing and applying tack coat using hot straight run bitumen of grade vg - 10 including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : on bituminous surface @ 0.50 kg / sqm., providing and laying semi-dense bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 25mm compacted thickness with bitumen of grade vg-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity., painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work., providing and fixing glow studs of size 100x20 mm made of heavy duty body shall be moulded asa (acrylic styrene acryloretrite ) or hip (high impact polystyrene) or abs having electronically welded micro- prismatic lens with abrasion resistant coating as approved by engineer in charge. the glow stud shall support a load of 13635 kg tested in accordance with astm d4280. the slope of retro- reflective surface shall be 35 (+/-5) degress to base .the reflective panels on both sides with at least 12 cm of reflective area up each side. the luminance intensity should be as per the specification and shall be tested as described in astm i: 809 as recommended in bs: 873 part 4 : 1973. the studs shall be fixed to the road surface using the adhesive conforming to is, as per procedure recommended by the manufacturer complete and as per direction of engineer-in-charge., clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of engineer-in- charge.
Tender For corrigendum : supply of various types of led and lighting material for emd 3 lighting & bop at sikka. - led tube light 4 ft long,20 watt, complete flame proof led light fixure with glass having light equivelent to 125 w hpmv conventional fitting, led flood light fixture 150w, led street light fitting - 90 watt, led flood light 240w., 80-watt led lamps industrial well glassed luminari fixture, l&t make complete contactors type: -mnx 70, cat.no.:-cs 94134, capacity: 70 amp, ac - 3,coil voltage: 240 v ac - b 000,aux. contacts:- 2 no + 2 nc, power contactor, tp, ac-3 duty, coil voltage-240 v ac, type: mnx-40, gelco make electronic digital time/quartz timer model no-dts 502, capacity: 25 a, 230 volts, single phase-n for street light on/off