Latest remote terminal Tenders | Government remote terminal Tenders

CTN :40219065

26 May, 2025 NA

Multi City - Multi State

Tender For comprehensive annual maintenance contract of 73 nos. of data loggers, 110 nos. of remote terminal unit, safety point alarm units, control office application and its associated equipments of make-efftronics over chakradharpur division.

CTN :40194903

21 May, 2025 NA

Ganganagar - Rajasthan

Tender For tender for supply of 2 mp network ptz camera 45x zoom ir range 300 mtr , 2 mp network bullet camera verifocal zoom ir range 60 mtr , prefabricated gi pole of 30 feet length with stair provision with cemented work , pvc pipe with bends for safety of cameras wiring , weather proof outdoor boxes for cameras accessories with locks , power surge protector for cameras accessories , 4 port gigabit ethernet switch with poe with 2 uplinks , ethernet media converter gigabit , sc to sc fiber patch cable single mode , ethernet utp patch cord 10 mtr length , ofc fiber cable 6 fiber single mode un-armouredwith laying , outdoor cat 6 utp cable , power cable 2 core 10 sqmm armoured , fiber joint box , support wire for fixing of ofc and power cable , necessaries hardware and accessories for cameras , necessaries hardware and accessories for electrical , power backup inverter for cameras and accessories , power backup tubular battery for cameras and accessories , power board for inverter connection , 3 pin top for backup connection wiring , outdoor weather proof protection unit for ups , installations of power backup solution , boom barrier 6 meter with 2 way controller , visitor/vehicle management software , access management biometric devices , access management rfid reader , access management controller card , rfid tags , vehicle windshield tags , visitor management system all in one , necessaries hardware and accessories for visitor management poles boxes cablling etc , network video recorder 64 channel with smart features , network video recorder 16 channel with smart features , hard disk 4 tb for surveillance recording , display unit 65 inch for monitoring with hdmi cable 15 meter , display unit 43 inch for monitoring with hdmi cable 15 meter , suitable networking 6 u racks at sub sector control rooms , suitable networking 22 u rack floor mounted at main control rooms , installations transportation and commissioning of the above project with 1 year warranty period including of other required accessories , hand tool kit with multiple tolls as required for repair cameras , crimping tool , splicing machine with all accessories

CTN :40186258

14 May, 2025 9.79 Lacs

Kota - Rajasthan

Tender For tn-13309 supply of active leds display of main control room of unit 5, kspts, kota.

CTN :40135132

05 May, 2025 NA

Hyderabad-T - Telangana

Tender For supply of mechanical spares - turning strip taper type 1850 mm l , 65 mmx 800 shaft with key and key way as , 65mm x 900 shaft with key and key way as , 70mm x 900 shaft with key and key way as , 60mm x800 shaft with keyway and key way , smps , ss 304 body asv model y type control val , single solenoide valve 1by4 5by2 70200211 , wd 40 420 ml , allen screw m 6 x 75 , hex bolt m 10 x 40 , allen csk screw 8 x 30 , hex bolt m 10 x 35 , allen bolt m 6 x 25 , hex bolt m 8 x 50 , hex bolt m 8 x 30 , hex bolt m 8 x 40 , nylock nut m 10 , hex bolt m 6 x 30 , washer 16 mm , allen bolt m 4 x 10 , washer m 12 , washer m 18 , nylock nut m 8 , ss allen screw m 5 x 10 , hex nut m 10 , washer m 10 , nylock nut m 6 , hex nut m 8 , washer m 8 , hex nut m 6 , washer m 6 , hex bolt m16 x 50 mm with nut , hex bolt m16 x 75 mm with nut , hex bolt m18 x 75 mm with nut , hex bolt m18 x 100 mm with nut , centering arms for carousal heavy model , guide rod for ejection pusher , guide rod for introduction pusher , linear bearing for carousal bosch , adjusting bolts for carousal , rubber damper for carousal , reflector for carousal , centering roller for gdbypt , leak measuring glass barometer , nylon roller for stopper with bush , optical cable sick , wt242x400 diffuse sensor sick , wl24x430 reflectve sensor sick , wll24x430 optical sensor sick , sensor cable 1 mtr , sensor cable 3 mtr , sensor cable 5 mtr , load cell cable 24 head carousel , power and communication cable , cable for solenoid valve , load cell cable 6 pin for 48 head carous , display for cuc card mark iv , magnetic senor turck bimiktyixh1141 , clamp for magnetic sensor , proximatory sensor bi2m12yixh1141 , proximate sensor for 48 head gdbypt m18 , evacuation adaptor , s.s center section for gdbypt with cylind , brass block gdbypt , m.s block gdbypt , hot air sealing gun baliga type , hot air sealing gun flp type , uhmwpe wear strip 2500x40x10 mm , uhm wear strip 50x6 , uhm taper strip 1550x32x13by8 , tensioning weight , pneumatic cylinder 50x320 mm , pu4 mm tube , pu6 mm tube , pu8 mm tube , pu10 mm tube , pu12 mm tube , lmounting for introbyejec. unit cylinder , dmounting for stopper cylinder , flexible coulpling 16x1.5 for introdcuti , ck9540 for ic96kdb40300 cylinder , teflon tape 3by4inch , load cell pc6 flintec 200 kg for 24h , load cell pc6 flintec 250 kg for 48h , cable ties 100mm pack of 100 black h , cable ties 250mm pack of 100 black h , cable ties 400mm pack of 100 black h , pneumatic push button mushroom head w , pneumatic straight fitting connector 12m , pneumatic straight fitting connector 4mm , pneumatic straight fitting connector 6mm , pneumatic straight fitting connector 8mm , pneumatic t fitting 12mm , pneumatic t fitting 4mm , pneumatic t fitting 6mm , pneumatic t fitting 8mm , pneumatic straight connector 4mm x 1by4 t , pneumatic straight connector 4mm x 1by8 t , pneumatic straight connector 6mm x 1by4 t , pneumatic straight connector 6mm x 1by8 t , pneumatic straight connector 8mm x 1by4 t , pneumatic straight connector 8mm x 1by8 t , pneumatic straight connector 12mm x 1by2 , pneumatic straight connector 4mm x m5 , pneumatic l type connector 4mm x 1by4 thr , pneumatic l type connector 4mm x 1by8 thr , pneumatic l type connector 6mm x 1by4 thr , pneumatic l type connector 6mm x 1by8 thr , pneumatic l type connector 8mm x 1by4 thr , pneumatic l type connector 8mm x 1by8 thr , pneumatic l type connector 12mm x 1by2 bid details/ 2 / 104 th , pneumatic l type connector 4mm x m5 , sealing unit fiber wrapped hose 1by2inch 15 , sealing unit fiber wrapped hose 1by2inch 80 , compact pneumatic cylinder bore 63mm st , seal kit for above compact pneumatic cyl , check scale cylinder type rmby92063bymby , festo ppl0.25 , filter regulators , sealing unit clamping cylinder , pneumatic cylinder 40x100 , lever valve , pneumatic cylinder 50x80 , pneumatic cylinder 50x200 , spider pu coupling bush size l150 mat , spider pu coupling bush size l190 mat

Central Government/Public Sector

CTN :38767469

05 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : upgrading the existing rtu protocol 104 (remote terminal unit) for dual channel redundancy channel reporting as per cerc guidelines at ntpc talcher kaniha.

Co-operative

CTN :40130234

08 May, 2025 NA

Vidisha - Madhya Pradesh

Tender For supply of items to bpacs - , 100 capacity 100 kg, 500x500 mm m.s. checkred top platform, heavy duty structure, ss load cell en 24 grade, green display with battery back up facility. ( ), -8 in 1 grain moisture meter parmeters: measuring range: 5% to 30% noisture, lempralure- 10c 60e maximum moisture.t- (1%rh +0.5). resolution: 0.5% moisture temprature0.1c/ 0.1f operating environment: temperature 0 c -40 ci bumidity (0-85% rh grain varicties to choose grain moisture test grain temperature test grain moisture standard setting and excessive moisture prompt backlight control function celsius, fahrenheit temperature unit conversion battery hold function automatic shut down without any operation for 5 minutes. ( ), - double needle. double thread, shosprof handle, self lubricated, 1/10 hp 8000 rpm 220 volt ac/dc motor ( ), 01 2000 [ 220 , 170 ] ( ), faq , pp faq , faq , pp faq , 3 x 4 thickness 500 micron ( ), 12 ( ), 4x6 with 20 guage wire mash 40 x 40 x 5 mm angle frame and stand with mid support 25 x 5 mm ms flate( ), [ ] 450 mm , rpm 1400 , 370 watt , 220 volt double ball bearing copper winding , metal body( ), 18 x 18 [ screen printing ] ( ), 18 x 18 / ] - ] isi ( ), 20 x 30 [120 gsm ] multi layered cross laminated polythene film dunnage sheet [is 14611 -2016 ] with up to date amendments, mass per unit 120 gm/m2+10% (mn type) weight 6.7kg+10%. ( )

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

CTN :40118886

15 May, 2025 NA

Hyderabad-T - Telangana

Tender For supply of retroftting of filament and repair of spares - controller module of cnc operator panel , display unit controller of cnc system , handheld wheel unit for axes controller of cnc system , keyboard of cnc control system , single motor module of 4-axis cnc filament winding machine , simodrive er module of cnc lathe machine , simodrive ir module of cnc system , sitop for power supply to cnc system , linear and rotational axes cnc controller , material lifting system , mobilized composite chips collector unit , composite material transporter , conditioning system of cnc controller panel , overhauling of centralized composite machined dust collector system , overhauling of filament winding machine , axis control card

CTN :40118664

22 May, 2025 9.57 Crore

Rupnagar - Punjab

Tender For supply of 5 megapixel outdoor colour ptz camera , 5 megapixel indoor colour ptz camera , 5 megapixel varifocal outdoor fixed camera , 5 megapixel varifocal indoor fixed camera , 5 megapixel outdoor anpr camera , layer 3 48 port switch , l2 24 port poe switch , l2 industrial grade 08 port managed poe switch , industrial grade media converter 04 plus 02 gigabit port , network storage as nas or san , 46 inch full hd led display , 3x2, 46 inch thin bazzele led video wall , work stations , control room console , video recording or management server , video analytic server , anpr server , ntp server , 8 port rack mountable kvm switch , 40u or 42u 19 inch equipment rack , power distribution panel , 20 kva rack mountable, modular, online ups set , software solution - vms,vas,frs,anpr , ng firewall or utm or antivirus for complete system , ms conduit , pvc pipe , hdpe pipe , gi pipe , optical fiber cable , cat 6 utp cable , cat6 4 pair shielded twisted pair cable , power cable 3 core 1.5 sqmm multi- strand pvc insulated pvc sheathed copper conductor , power cable 3 core 6 sqmm multi-strand copper conductor , power cable 4 core 16 sqmm multi-strand aluminium conductor , light guide interconnect unit liu , gi pole for mounting of camera , stainless steel pole for mounting of cameras , cutting of grooves of existing granite or tile or concrete flooring surface , excavation in soft or hard soil and road cutting , road cutting , horizontal directional digging , earthing , itc work , training and documentation , manpower during dlp period with epf,esic and bonus will be paid extra on actual basis on production of bills

Remote Terminal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Co-operative

corporations/Associations/Others

corporations/Associations/Others