Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit
Tender For short tender notice for purchase and supply of laboratory equipment in different colleges in aurangabad. - district planning office, aurangabad. - arc indicator medium, carry foster bridge, camera lucida mirror type, bar pendulum tron, bending of beem app, boyle law app double and routine, dynmo model ac/dc superior qulity, double incline planl teak wood, inertia table app, incline plane 4" aluminum arc, k-constant spring app. alum scale, hook 5 law app big size 12" glass, jagger app complete, logic gate, maxwell vibration needle brass, mew app, model of bio gas plant, model of newton law of cooling universty, post office box brass, reading telescopee, , tangent glavanometer bras deluxe, surface tension app, searle app brass, screw guage(25mm), ring ball app, pin hole camera, newton second law, newton first law, model of wind mill, model of traffic light signal controller, model of solar system electric, model of phase of moon, model of newton colur disk, model of four stroke petrol engine, hydero power turbine, gold leaf electroscope, fraction board app, electric bell, electric, 29 newton third law, spectrometer, comutatr, tunning forks (original), high resistance coil 10ohms, connecting wires, wooden stands v-shape, wooden screens black and white, geometry boxes 1 big), deflection of sound, resistance boxes 500 ohms, meter bridge, p-n junctions diode kit, plug keys (two-way), magnetic needles, tangent galvano meter, digital multi meter(superior), bar magnets(4 inches), transistor characteristics, spring constant apparatus, battery eliminator, 12volts, ammeter, volt meter, object stand of wire mesh, haguer app, galvanometer, specific gravity bottles 25ml b/s/g), soldering gun gum, lead wire, velocity of sound in air apparatus, stop clocks, magnetometer compass, copper calorimeter, tripod stands, 6x4, rheostat, 8" brass, potential meter, manganese wire, nichrome wire, soldering lead, weighing machine, resistance wire, filterpapers, ohm's law apparatus, solar cell, zenor diode app, spring balance tubuler, potestion meter 10 wire, physcis chart set of 15, three kinds of levers, pulleys (simple machines), dynamo (hindi-english), refraction of light by a prism [hindi-english, petrol engine, the steam engine, pascal's law, newton's laws of motion, light (hindi-english), refraction of light, archimedes principle, reflection of light from mirror, refraction of light through lenses, heat & temperature, sound, chemistry, test tube-15 x125 mm, borosil, glass, watch glass-3"dia, burette-50ml-screw type stop cock, borosili, conical flask-250ml-borosil glass, pipetto-20ml with one mark borosil class, measuring cylinder (100nil) with spilt cork-, borosil glass, retort stand plastic with clamp, reagent bottle-250ml, narrow mouth, indi glass borosil, reagent bottle-125ml, indian glass, narro mouth borosil, test tube-25 x 150 mm (boiling, tube) borosil, atomic model senior polylab, compound microscope- with 2 eye pleces. obj.(151), brush no "0", dissection needles, beaker-250ml-plastic, petri dish 4" dia, imported borosil glass, petri dish-polythene-4" dia, cork borer set-set of 6 sizes, brass, regular, rubber cork-one holed, cover slips-pack, filter paper-sheets, dessicator-6" dia, indian glass, with lid, chromatogrphy paper-sheets, mortar & pestle-set, porcelene, test tube stands (plastic), ipps app 500 ml plastic, model of crystel,, model of grafid, model of dimond, sprit limp s.s, bunsen surener with stop cork, gas tape 2 way, rubber cork mix, spatula 6 ss, flask round bottam 250 ml borosil, flask round bottam 500 mi borosil, flask flat bottam 250 ml borois!, falsk flat bottam 500 ml borois!, flask volumetric 250 ml borosil, beaker 250 ml boroisl, beaker 500 ml borosil, funnel 3" borosil, thisel funnel 12", cavity slide 2 cavity, rubber tubing, magnesium ribbon, gas jar 6x2 plastic, capillary tubes packet, thermo meters lab, chemistry chemical, manganese dioxide 500 gm, barium chloride 500 gm, ferric chloride 500 gm, silver nitrate
Tender For corrigendum : supply of laminar air flow horizontal model , digital electronic balance , farmers photometer , ganong respirometer , ganong potometer , magnetic stirrer with hot plate , occular micrometer erma , ph meter digital with electrode , quadrate wooden , trinocular inverted tissue culture microscope , micro processor micro-centrifuge machine mini centrifuge , willmort bubbler , compound microscope isi mark with inbuilt led , haemocytometer marienfield , hot air oven chamber , hot plate round electrical , bod incubator digital model , orbital shaker incubator , digital video microscope advance , dry wet thermometer , fortains barometer without mercury , the earths layer model , solar system model , tracing table without glass fitted with 2 led tube , 3d geomorphological models gm 1 gm 2 , hygrometer , plane table set , prismatic compass with stand , rain gauge self recording , relief raised 3d maps with frame , wind vane , wall thermometer , weathers maps set of 12 , vernier transit theodolite , dumpy level , engineering chain tape set , brunton compass with stand , levellingg staf , indian pattern clinometer , abney level , aerial photographs coloured , anemometer handheld , aneroid barometer demonstration model , autolevel magnification 32x , french curve set of 24 curves , laser distance meter , maximum minimum thermometer , phtog great geographers big size on neuwood , season app model , nautical sextant , pantagraph 75 cm , phase of moon model , sextant model , geological map of india mp , pocket stereoscope , globe physical cum political imp , political maps of india world , cro 20mhz dual channel 2 trac , poiseuilles viscosity apparatus , stop watch digital , multimeter digital , potentiometer 10 wire with jockey heavy , newtons ring microscope , meter bridge with pencil jockey heavy pattern , torsion app horizontal pattern bartons method , polarimeter half shade , newtons law of cooling app college pattern , spectrophotometer digital 340nm 960 nm , flame photometer with compressor , digital potentiometer
Tender For auction sale of depot ferrous scrap - scrap ferrous cast steel consisting of buffer, buffer socket,buffer plunger, axle box housing,axle cover, coupler body & its loos-parts, knucle, pivot top & bottom, wind & narrow-jaw adopter, rear & inner cover, anti roll-bar with c.i.,screw coupling, pin, various types of shaft with or w/o bearing, bearing coller & cone, roller - cartridge bearing, supporting, device, spring- leaf, small lever & pull-rod, hanger bracket, control arm link, anchrage lock, roller/balls of bearing, motor suspension - unit tube, cuppler - body with balancing draft wear pad, gear off shorts cut pcs of wheel disc, tyre & axle, lower- spring beam arrangement seat,buffer complet, m.s. chain, break shoe head,machine hook,guide-rod , impeler track machine parts,ingot,iron block, & other varrious items fit for cast steel release from loco,carriage, sig, electric, trd, tmc, of sort & sizes with attachment of steel, c.i. & neg. non ferrous. if any. note :- 1. loading by purchaser. 2. cutting not allowed. 3. delivery not allowed against part payment. location :- lying in bin no. 06 near line no. -10
Tender For bid to ras supply of bench top meter for measurement , electronic balance , benkelmen beam , centrifuge extractor , radar gun , deval abrasion value , ultra sonic pulse velocity instrument , torsion testing machine , spring material test , core cutting machine with drill bit , beam deflection appratus , strain gauge indicator , weight hanger , wind tunnel , open channel flume , friction loss along a pipe , minor losses in pipe appratus , reynolds apparatus , universal milling machine , mechanical press , resistance spot welding , welding hand shield , welding helmet , welding helmet auto darkening helmet , tool and cutter grinder machine , hydraulic hacksaw machine , gas cylinder filled with argon gas for tig welding , gas cylinder filled , crucibles set , pouring ladles , crucible tongs , slag spoons and skimmers set , indoor ducted chimney with furnace , moulding box , bernoulli theorem demonstration module , energy losses in pipes , fluid friction measurement , orifice and mouthpiece flow apparatus , orifice and venturi meter demonstrator , pitot tube apparatus , determine meta centric height , notch tank apparatus , determine density and viscosity of oil , determine critical reynolds number of tube , free and force vortex flow apparatus , impact of jets on vanes , palton turbine test rig , francis turbine test rig , kaplan turbine test rig , centrifugal pump test rig , reciprocating pump test rig , performance of a two stage reciprocating air compressor , air blower apparatus , heat transfer coefficient of composite wall apparatus , natural convection heat transfer apparatus
Tender For engineering procurement and construction of wash centre at mahi miri kaziranga including development of eco education facilities wash infrastructure renewableenergysystems etc
Tender For capital repair of exhauster, top & bottom casing, isolation gate repair, replacement of cooler fan, repair of crusher to direct chute, mixer & noduliser equipments, replacement of wind legs, installation of monorail & telpher in machine crane, instalation of monorail for dctc changing & installation of billet & trolley for windleg shifting, capital repair of chutes of conveyor belts of raw material area, vaccuum chamber, wind main and ventillation duct of sinter machine-2, sp-3.
Tender For supply of set of rubber packing (gasket) for doors & windows of 3 phase locos set consisting of 9items as following:- (1) modified window glass (log) packing (outer) drg. no. c/els/lgd/rc/4/11 (alt.1) =12 mtrs. (2) packing for wind screen (log inner) of 3 phase locos. drg. c/els/lgd/b.f/4/41 (alt.1)=12 mtrs. (3) gasket for window outer frame of wag9/wap7 locos (04 nos to be supplied each of 1.75mtrs as a single closed piece as per drg.), drg. no.c/els/lgd/rc/4/10 (alt-1) =07 mtrs. (4) packing forcab triangular window of 3 phase locos (inner) drg. no. c/ els/lgd/b.f/4/39 (alt.1) = 06 mtrs. (5) packing for cab triangular window of 3 phase locos (outer) drg. no.c/els/lgd/b.f/4/38 (alt.1) =06 mtrs. (6)packing for machine room door of 3 phase drg. no. c/els/lgd/b.f/4/38 (alt.1)=12 mtrs. (7) cab door packing for wag9 locos drg.no. c/els/lgd/rc/4/17 (alt.1) = 22 mtrs. (8) packing (outer) for main door window glass of wag9 locos drg. no.c/els/lgd/rc/4/13 (alt-1) =10 mtrs. (9) main door glass packing(inner) for wag9 locos drg. no. c/els/lgd/rc/4/16 (alt-1) =10 mtrs. [ warranty period: 30 monthsafter the date of delivery ]