Latest report preparation work Tenders | Government report preparation work Tenders

CTN :43246122

28 Jan, 2026 NA

Bongaigaon - Assam

Tender For "providing project management services engineering, procurement and construction (epc) contracts and other works contracts ( item rate contracts) for doubling project between agthori station (km 393.380) to kamakhya station (km 401.120) including construction of 2nd rail cum road bridge over river brahmaputra including viaduct, retaining walls, embankment and minor bridges including track work, ohe work, signaling and telecom work and general work in connection with agthori - kamakhya doubling project of northeast frontier railway in the state of assam." and "engineering, procurement and construction (epc) contracts and other works contracts (item rate contracts) for doubling of track between azara (163.000 km) (including) and kamakhya stations (including)up to km 176.000 (13 km) including electrification and signalling works in connectionwith new bongaigaon -goalpara town - kamakhya doubling project of northeast frontier railway."

Co-operative

CTN :43238694

03 Jan, 2026 5.00 Crore

Multi City - Karnataka

Tender For design,engineering,procurement,manufacturing,fabrication, testing & inspection, supply, erection and commissioning ,trial testing of electrostatic precipitator (esp) & its auxiliaries with complete accessories for the project completion of co-gen plant with 1 x 220 tph travelling grate steam generator of our factory

Co-operative

CTN :43240975

03 Jan, 2026 NA

Bijapur - Karnataka

Tender For for design, engineering procurement, manufacturing, fabrication, testing & inspection, supply, erection and commissioning trial testing of electrostatic precipitator (esp) & its auxiliaries with complete accessories for the project completion of co-gen plant with 1 x 220 tph travelling grate steam generator of our factory

CTN :43220759

20 Jan, 2026 NA

Kalahandi - Odisha

Tender For carrying out design, engineering, manufacturing, testing at manufacturer's works before dispatch, supply, transportation, storage at site, intra site transportation, insurance (transit, storage cum erection, testing & commissioning), erection, testing and commissioning of 4 nos. vertical francis reversible pump-turbines and synchronous motor-generator sets each of 150 mw (total of 4 x 150 mw i.e 600 mw) along with all associated auxiliary and ancillary equipments, 400kv gis, pothead yard & power evacuation structures including all civil works, hydro mechanical works for upper indravati pumped storage project through epc on turnkey basis at ranibahal , kalahandi district, odisha.

Central Government/Public Sector

CTN :43035914

23 Dec, 2025 7.10 Crore

Bhopal - Madhya Pradesh

Tender For corrigendum : invitation of equotation from empaneled agencies to take up the emergent repair restoration works on project works of 4lane of katni bypass section of nh30 from km 359.375 to km 378.555 having a length of 19.230 km in the state of mp on engineering p

CTN :43223155

06 Jan, 2026 NA

Meerut - Uttar Pradesh

Tender For request for proposal appointment of consultant to setup project management unit for architecture, engineering, planning and other projects for meerut development authority

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

CTN :43168516

01 Jan, 2026 36.43 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for mechanical engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institut

CTN :43147000

31 Dec, 2025 36.43 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for mechanical engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institu

CTN :43229448

22 Jan, 2026 NA

Katihar - Bihar

Tender For rfp for engineering, procurement and construction (epc) contract agreement for balance work of construction of sub-structure and super-structure of major bridge no. 5 (5x12.2m - psc slab at ch.13.400 km), bridge no. 9 (3x12.2 -psc slab at ch 20.602 km), bridge no. 10 (5x12.2m - psc slab at ch. 22.455 km), bridge no.12 (5x12.20m - psc slab at ch. 28.065 km ) and important br. no. 11 (8x45.7m - owg at ch. 25.470 km ) and construction of sub-structure of bridge no. 6 (1x30.50m - owg at ch. 15.665km), construction of sub-structure and super-structure of bridge no. 7 (7x12.2m -psc slab at ch. 17.855 km) and bridge no. 8 (4x12.2m -psc slab at ch.19.035 km), including protection work, guidebund, making embankment in approaches of bridge and other related bridge works in katihar (kir)- kumedpur (kdpr) railway bg doubling project of nf railway (construction) on epc mode.

Report Preparation Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Co-operative

Co-operative

Central Government/Public Sector