Get complete information related to latest Rescue Tube Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Rescue Tube Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Rescue Tube Tenders.
Tender For auction sale of depot ferrous scrap - lot consisting of condemned foundry slag cake with rubble including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. however ferrous items embedded with the slag cake, which cannot be removed ordinarily by hand shall be permitted for loading. delivery will be given from road approaching point in one direction only note : purchaser should lift all the material as available in the lot including rubble, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing both slag and rubble by scooping both simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt
Tender For work contract for procurement of other materials - led flood light-200 watt, copper cable 1.5sqm x 3 core, gci sheet 10 feet, green safety net, scaffolding clamp
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For supply of stores materials price list & necessary information board made of clear and transparent , duly pasted and laminated over vinyl colour printed sheet, to ensure durability and clear visibility and the size of board is (7 inch x 4 inch ) & 2 mm thickness.04 nos. holes to be provided for fixing the board ,polycarbonate base sheets confirm to is:14443 1997. colour coding is different for safety items (red), mci(yellow), normal (light green) and opening on one side is : 14443 (1997) . [ warranty period: 30 months after the date of delivery ]
Tender For repairing & desilting of machine holes by entering skill labourwith using necessary protecting gears and safety equipments, placing plugs and dewatering pumps etc. in various existing sewage/storm drainage lines,machineholes etc. including carting of desilted materials, and debris from siteand raising existing road level machinehole, chamber cover & metal detectormachine to finding in various society area / at various places of sub zone-3 insouth west (athwa) zone.
Tender For making of various sizes pontoon and safety railing along the four sides of a pontoon including supply of iron materials and drums with making of shed for pump and motor and repairing of old pontoons for jagannath ocp, jagannath area
Tender For job work of shifting and installation of automatic rain gauge station assemblies, including dismantling of existing units, surface preparation, implementation of all necessary safety measures, installation, testing, commissioning and all associated works such as supply of materials, skilled labor, transportation and logistics from ware project sub-division office no. 3, vyara compound to ware-2 project division, vyara compound under r.g. sub-division navsari
Tender For auction sale of depot ferrous scrap - scrap turning & boring (ferrous) remarks : - quantity is assessed visually on approximate basis. pucca approach road is available near the lot. lot no. is painted on the board at the location. delivery on actual weighment basis.weighment will be taken at the nearest govt. approved weigh bridge.only materials mentioned in d.o. should be delivered. purchaser should see the lot personally before bidding. no claim will be entertained after sale of lot. purchaser has to ensure the safety of railway assets/his labour and other staff. purchaser will be fully responsible for any damage to railway property. stock holder:- sse/mw, emu car shed kurla. qty-20 mts. (approx).
Tender For auction sale of depot ferrous scrap - cond. & u/s ferrous scrap in corroded nature such as head stock, foot steps, berth frame, engineering items such as rusted barrigaurds, pipes, angles, rails adhered or separate, drum, coach cuttings, trolleys, grills, guards, dust bins, heavy nature coach parts parts in broken or full condition, pway support structures,gi sheets, pulley, frames, ferrous boxes, sign boards, roller shutters, corroded/ dinged/ damaged wagon door, zinc coated fs sheets, base plates,ms/gi sheets in full/cut/damaged/rusted/corroded/crushed condition, wagon floor sheet, coach door ,sliding door of various sorts & sizes, battery boxes, battery box door, collapsible gate, punches plate/ sheet/ screen, corroded shear cutups, galvanised sheets rusted condition, roof light/tube light fitting with/without ballast, fl housing, tl patti, crushed drums, cfl frame, regulator box, ms gutter, corroded fabrication scrap, carriage fan body cover/end shield/ guard/ blade, pedestal fan guard, air brake pipes, corr. barrels/paint drums, silent block, anchor block, wires,chains,boxes,hoop iron,lamps,air filter,clips, panels, corroded gi pipes with/without valves, gi duct, ci covers/piper/joints,coach/wagon cutup parts,sheets,equalizing stay,brake anchor,round/square pipes,pipe wrench,pins, rivets, bolts, nuts, small iron pieces,heavy melting scrap,wire rope/safety rope with/without aluminium sling,box type fitting,pipes,dust bin, hood,rack,bond, hs lamp, battery charger core with iron stand or frame, iron core, fl patti & fitting of all types and sorts and sizes, fire extinguisher without cap, fan down rod, ferrous ac template, train information display system,battery tray,trough floor sheets,ferrous parts accessories released from carriage/wagon/loco rolling stocks, galvanized sheets of sorts & sizes, sand pipe,rolling shutter,gi/ms angles and channels,rails,cutmast,protectivetube, wagon/coach springs,shockabsorber, suspensionunit, equilising stay, ls beam, bolster, silent block,iron gate,clower cups,guard gril,irongrill,springs,pins, heavy melting scrap,ac duct,gi ipes,ladders and all the above items are of various sorts and sizes in full/cut/broken/damaged and with/without wooden/glass/ rubber/ fs end fittings with /without minor non ferrous attachments if any in as is where is condition. pl.no. 98090800. custodian: cdms-rsf-gsd-per. note: 1) cutting is permitted to lorry loadable size only. 2) if any non-ferrous materials found should be handed over to custodian.3) jcb/crane loading is permitted. location: a row bin 12