Latest residual life assessment Tenders | Government residual life assessment Tenders

State Government

CTN :40403252

02 Jul, 2025 NA

Khandwa - Madhya Pradesh

Tender For corrigendum : providing of facility management services - lumpsum based - electrical items; supply and installation of electrical items; consumables to be provided by service provider (inclusive in contract cost)

State Government

CTN :40905766

10 Jul, 2025 NA

Keonjhar - Odisha

Tender For supply of consumables and accessories for updation of computers, laptops, printers and scanners etc. (ancillary related items)

Co-operative

CTN :40915353

10 Jul, 2025 1.50 Lacs

Bareilly - Uttar Pradesh

Tender For supply of consumables items for season 2025-26

State Government

CTN :40894705

22 Jul, 2025 NA

Kalyan - Telangana

Tender For fixing of rate contract for supply of consumables required for network related items at corporate office and generating stations of tggenco for a period of two years from 01.04.2025 to 31.03.2027 - ip66jb(200mmx200mm) for mounting the power adopter for each camera, gigabit poe adaptor i/p 100-240v, o/p:24v dc, 0.5a with 3 pin power, for cameras, ofc to ethernet media converter, 24 port fiber liu with adaptor, plate, 24 port cat6 fully loaded patch panel, 24 port cat6 patch panel unloaded, cat6 utp cable box 305 mtrs, cat6, stp cable box, 305 mtrs, cat6 i/os with face plate & back boxes, cat6 i/os with dual face plate & back, boxes, cat6 i/os with quad face plate & back, boxes, cat6 information outlets, cat6 patch card - 1 mtr, cat6 patch card - 2 mtrs, cat6 patch card - 3 mtrs, cat 6 cable of 40 mtrs, sc-sc duplex single mode (9/125), patch card fibre -1 mtr, sc lc duplex single mode (9/125), patch card fibre -1 mtr, sc/sc duplex multimode 62.5/125?m, patch card fibre -2 mtrs, sc/lc duplex multimode 62.5/125?m, patch card fibre -2 mtrs, sc/sc duplex 62.5/125?m patch card, fibre -3 mtrs, sc/lc duplex 62.5/125?m patch card, fibre -3 mtrs, sc/sc-a single mode media, access converter 10/100 mbps, sc/sc-b single mode media, access converter 10/100 mbps, 10/100/1000 sc-sc single mode, media converter upto 20km, media access converter, 20km, supprt, atype, media access converter, 20km, supprt, btype, 10/100/1000 sc-sc multi mode, media converter, upto 2km, 10/100/1000 mbps pci lan card, 8-port unmanageable switch, 10/100mbps, 8-port gigabit unmanageable switch, 8-port gigabit poe unmanageable switch, (4xpoe+ ports), 8-port gigabit poe unmanageable switch, (8xpoe ports), 12-port unmanageable switch, 10/100mbps, 16-port unmanageable switch,, 10/100mbps, 24-port unmanageable switch, 10/100, mbps, 28-port gigabit smart managed switch, including 4 gigabit sfp ports, 1000 base-lx /lh gigabit ethernet, optical transceiver (small formfactor, pluggable (sfp)) typical reach, of 10 km (for core switch), 150 mbps wireless adsl router, dual band wi-fi router, wi-fi speed up to, 867 mbps/5ghz+400mbps/2.4ghz, 5, gigabit ports, 4 external antennas, mumimo,, dual band, wi-fi coverage with, access point mode, wireless access point (dual band, with min 300 mbps wifi range extender), 154 mbps wireless adapter, 154 mbps pci internal wireless, adapter, 6 o/l universal power network, racks, 7 o/l universal power network, racks, 6u wall mount rack (without accessories), 9u network rack (without accessories), 12u wall mount rack (without, accessories), cctv dvr rack/nvr/server/network, rack,dvr rack, dvr box wall, mounted,cctv box, abs plastic cabinet, box(size 12 inch * 11 inch * 5 inch) with, inbuilt spike buster, pole mount camera loop bracket for, cctv security camera indoor outdoor, universal compatible, single mode 6 core ofc armoured cable, single mode 12 core ofc armoured, cable, single mode ofc pig tails, module, sc-sc duplex single mode, fiber optic adapter, 60mm heat shrinkable protection sleeves, for fiber optical fusion splicer machine, splicing (pack of 100), fiber optic joint termination cylindrical box, small with ofc splicing tray, 2-way, ofc termination boxes, pvc rectangular, cpe610 23dbi outdoor cpe, access point, olte (v 1600d4-dp) genpon olt, rj45 cable tester, usb male to rj45 ethernet lan adapter, lan extender/rj45 adaptor coupler,, female-female, lan extenders with routing solution

State Government

CTN :40887924

22 Jul, 2025 NA

Kalyan - Telangana

Tender For fixing of rate contract for supply of consumables required for computers related items at corporate office and generating stations of tggenco for a period of two years from 01.04.2025 to 31.03.2027

State Government

CTN :40887925

22 Jul, 2025 NA

Kalyan - Telangana

Tender For fixing of rate contract for supply of consumables required for telecom related items at corporate office and generating stations of tggenco for a period of two years from 01.04.2025 to 31.03.2027 - power adaptors, 9v, 500ma, for beetel m78, adapter for ip phone, i/p 100-, 240v ac, o/p:48vdc, 1.5a, rj11 telephone rosett, boxes, rj11 jacks, rj45 crimper, rj45 jack, rj45 stp jacks (box of each, 100 nos), rj-45 surface mount, box with i/o fixing, jumper wire bundle 0.5mm,, 90mtrs, telephone cable bundle 1, pair pvc 0.5mm (90 mtrs), telephone cable bundle 2, pair pvc 0.5mm (90 mmtrs), telephone cable bundle 5 pair, pvc (0.5mm)(90 mtrs), telephone cable bundle 10, pair pvc 0.5mm (90 mtrs), telephone cable bundle 20, pair, pvc 0.5mm (90 mtrs), coil cord for analogue corded, phone handset 2 mtr, line cord for corded phone, (male to male) 2mtr, testing phones, single line caller id, telephones, 1+1 phones with display, gsm sim based phone f2n, siemens open stage 15t, lava digital landline phones, with connecting cable, telephones krones.

CTN :40917683

14 Jul, 2025 NA

Izatnagar - Uttar Pradesh

Tender For supply of set of consumables for eec make usfd of wheel & axle testing containing following items in each set - 1) single crystal probes 2.5mhz, 20mm dia - 10nos. 2) perspex wedge 10.0 deg, 20mm dia - 03n os. 3) perspex wedge 12.5deg, 20mm dia -03nos. 4) perspex wedge 17.5deg, 20mm dia-04nos. 5) bnc to bnc cable 2mtrs length - 12nos. 6) perspex wedge 15 deg, 20mm dia -03nos. 7) step block gauge 1mm to 10mm nickle plated - 01no. [ warranty period: 30 months after the date of delivery ]

CTN :40917905

21 Jul, 2025 NA

Jamalpur - Bihar

Tender For supply of set of consumables items required for dga testing. each set consists of 06 types of item. det ailed specification as per annexure attached. [ warranty period: 30 months after the date of delivery ]

CTN :40903868

24 Jul, 2025 NA

Puducherry - Tamil Nadu

Tender For supply of consumables and non-consumables for the department of central workshop - terms and conditions: 1. for the items where "samples to be shown/provided" is mentioned, the samples should be submitted to the department at the time of quotation submission. the quotation will not be considered if samples are not submitted. 2. for non-consumable items, the brand name should be mentioned for each item. those quotations without brand name will be rejected. 3. the items should be door-delivered to the department of central workshop without any charge (loading / unloading charge, etc.) 4. the expiry date of consumables should not be less than one year after the date of supply. 5. price quoted should be inclusive of gst. 6. the firm should provide warranty for 1 year for the non-consumable items. general section, aluminium sheet 16 swg 8x4 length (isi), aluminium sheet 18 swg 8x4 length (isi), copper sheet 15 swg 8x4 length (isi), m.s.sheet 20g (isi) 8x4 length, m.s.sheet 18g (isi) 8x4 length, m.s.sheet 10g (isi) 8x4 length, m.s.sheet 16g (isi) 8x4 length, steel almirah thread type handle with washer & nut isi marked, godrej bush type steel almirah handle, steel almirah locks & key branded make, steel alimarak godrej lock with key branded make, steel alimarah handle inside fix gun metal with brass revit square type, lock with key for steel table isi marked, drawer handle for steel table, copper wire 8swg, copper wire 12swg, copper wire 15swg, brass pad lock 6" l, brass pad lock 4" l, brass pad lock 3" l, brass pad lock 2" l, ms pad lock 6" l, ms pad lock 8" l, m.s.welding rod 8 swg isi make, m.s.welding rod 10 swg isi make, m.s.welding rod 12 swg isi make, s.s.welding rod 12 swg isi make, s.s.welding rod 10 swg isi make, s.s.welding rod 14 swg isi make, gas welding 1/8" brass rod, gas welding flux 1 kg tin, gas welding carbide stone 5 kg tin, welding hand shield, welding glass (german/checkoslovia) with both sides safety glass. (safety glass+welding glass+safety glass), chipping hammer, wire brush, welding electrode holder, 1" x 1" m.s.square pipe 18 gauge (20 feet length) (isi), 7/8" m.s.round pipe 16 gauge (20 feet length) (isi), 3/4" m.s.channel (20 feet length) (isi), 1" x 1/8" m.s.angle (20 feet length) (isi), 3/4" x 3/4" m.s.square pipe 14 gauge (20 feet length) (isi), 1 1/4"x 1/8" m.s.angle (20 feet length)(isi), 8mm m.s.round rod (20 feet length)(isi), 1" x 1/8" m.s.flat (20 feet length)(isi), 3/4" x 1/8" m.s.flat (20 feet length)(isi), 1 1/2" x 1/8" m.s.flat (20 feet length)(isi), m.s.rod 30mm dia 20 feet length, s.s rod 2.5 mm (20 feet length), s.s rod 6 mm (20 feet length), g.i.pipe 3/4" x 20 feet with isi mark b class, g.i.pipe 1/2" x 20 feet with isi mark b class, 2"x1/8 m.s flat 20ft, bolt nut with washer 3/16"x1/4"l nickel coated, bolt nut with washer 3/16"x1/2"l nickel coated, bolt nut with washer 3/16"x1"l nickel coated, bolt nut with washer 3/16"x11/2" l nickel coated, bolt nut with washer 3/16"x2"l nickel coated, 1/4" x1" m.s. bolt, nut with washer nickel, 1/4" x11/4" m.s. bolt, nut with washer nickel coated, 1/4" x11/2" m.s. bolt, nut with washer nickel coated, 1/4" x2" m.s. bolt, nut with washer nickel, 5/16" x 1" m.s.bolt, nut with washer nickel, 5/16" x 11/2" m.s.bolt, nut with washer nickel, 5/16" x 2" m.s.bolt, nut with washer nickel, 3/8" x 1" m.s bolt, nut with washer nickel, 3/16" x 1" g.i.coating bolt, nut with washer, 5mm x 25mm g.i.coated bolt,nut with washer, 25mm i.d washer with 3mm thickness, nylon bush round type 3/4", nylon bush round type 1", nylon bush round type 1 1/4", nylon bush round type 1 1/2", nylon bush square type 3/4", nylon bush square type 1", nylon bush square type 1 1/4", nylon bush square type 1 1/2", 3/8th (30mm-1 1/4") plastic moulded star head male clamping knob, wheels, 5" (125mm) stem wheel with brake, swivel castor wheel, heavy duty, load capacity - 250kgs, 24" x 1" wheel chair rear spare wheel and solid tire with 3/4" hand push rim, maximum 8 spokes, 7/16th double

CTN :40695535

10 Jul, 2025 5.50 Crore

Delhi - Delhi

Tender For corrigendum : supply of medical and surgical consumables items on rate contract for cantonment general hospital

Residual Life Assessment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Co-operative

State Government

State Government

State Government