Latest resistance Tenders | Government resistance Tenders

Central Government/Public Sector

CTN :45487203

10 Jul, 2026 NA

Chittaranjan - West Bengal

Tender For supply of zr. cu. stamping type resistance ring for shaft mounted scheme- i rotor. drg. no: - skel- 4738 alt-3, ref. 2 or latest. spec. no:- rdso/08/el/spec./0062/rev-3, str no: - clw/tm/17700. rev. 1 or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45487096

16 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For fabric coated industrial tape with paper based release liner & fire retardant coating in self adhesive form with high tear strength & high tensile strength to the following technical requirements: 1.application : suitable for protection of cables from sharp edges inside stainless steel cable trays.2.thickness of tape with adhesive : 0.20 to 0.30 mm. 3.adhesion to steel (n/cm) : minimum 7.5 n/cm* 4. tensile strength (n/cm): minimum 150 n/cm* 5.elangation at break (%) : 30-40 %* 6.fire resistance: ul 94-v0 7.shelf life : 12 months from date of receipt of material 8.length (mts) : 20 +/-0.010 mts. 9.width (cm) : 7.5 +/- 0.5 cm. 10.water permeability : impermeable and no drops shall be observed after 24 hrs. * shall conform to is 7809. note: 1. test reports from any nabl approved labs is acceptable. 2. sample shall be supplied before effecting bulk supply. 3.oems or their authorized dealers shall only be considered. 4. the tape shall be supplied in roll form with suitable packing arrangement. [warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45486202

16 Jun, 2026 4.00 Lacs

Vidisha - Madhya Pradesh

Tender For enquiry for supply of various items for stm offices situated under gm (o and m) mpmkvvcl vidisha. - triping coil essun 30 volt dc, length of coil 40 mm, i.d 26 mm o.d. 50 mm resistance 3.3 ohm tolarance ± 0.1ohm, weight coil 290 gram, triping coil megawin 30 volt dc, length of coil 93 (with brass tube of 95 mm) id 16 mm o.d 41 mm resitance 4.2 ohm tolrance ± 0.1 ohm weight coil 505 gram overall length with pluger 141mm, tripping coil popular 30 volt dc, tripping coil rr ispat 30 volt dc, breather 5 kg,, breather 3 kg,, transformer cork sheet 10 mm, 11 kv insulating pull road 11 kv bhel make vcb, drive road 11 kv bhel, drive 11 kv magawin

Central Government/Public Sector

CTN :45197122

18 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : providing of calibration services - electrical, as per technical specifications; voltage, current, power (ac/dc), resistance, as per technical specifications; nabl labs; buyer premises (onsite)

Central Government/Public Sector

CTN :45296115

16 Jun, 2026 NA

Ranga Reddy-Ap - Andhra Pradesh

Tender For corrigendum : providing of calibration services - mechanical, electrical, thermal, time; dimension, voltage, current, power (ac/dc), frequency, power factor, phase angle, resistance, temperature, velocity 0 to 30 m per sec accuracy 0.02 m per sec; nabl labs; hybrid (deta..

corporations/Associations/Others

CTN :45490050

16 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeterwidth- 700 milimeterheight 1800 milimetermaximum weight -120 kilogrammaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions.colour:- green paint finish- power coated, uv resistantpaint coating thickness (min) 100 micrometerwarranty 3 years.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of leg press leg shaper complete in all respects having following specifications.a) all pipes should used in the equipments should be galvanised with 3mm thickness.b) multi colour powder coating with polyster paints should be used on all the equipments.c) the foot pedal on all the equipments should be of aluminium only.d) the seats should be made of high quality plastic with colour scheme in yellow or orange.e) the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730*450*1450mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-76*3mm steel pipe5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts.8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck9 anti theft cover is made by stainless steel/high quality plastic.10 thickness of bearing bracket is no less than8mm11 hazardous materials like coating agent, rubber are under national newest standard.functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages.complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge., providing and fixing of parallel bars size/dimensionslength- 900 millimeterheight 800 millimetermaterial:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength and durability. the ver

Central Government/Public Sector

CTN :45492772

19 Jun, 2026 NA

Jamnagar - Gujarat

Tender For supply of paint interthane 990 grey or light grey , paint golden yellow , paint epoxy allum primer , paint dark grey , paint coal tar epoxy black , paint black heat resistance , paint black enamel , paint aluminium heat resistance , paint epoxy red cxider primer , paint yellow zinc chromate 8010 000113 , paint white enamel , paint silver , paint rfu priming red lead , paint red oxide , paint olive green primer

Central Government/Public Sector

CTN :45331032

12 Jun, 2026 NA

Dakshina Kannada - Karnataka

Tender For bid to ras supply of procurement of fire resistance action overall size (large)

Central Government/Public Sector

CTN :45242882

17 Jun, 2026 48.00 Lacs

Ezhimala - Kerala

Tender For corrigendum : repair replacement and day to day maintenance of internal electrical wiring lightning protection system fittings and fixtures rewinding of ceiling fan exhaust fan painting of fan repairing of geyser in drill shed pt shed mwtc eca zamorin sqn kcm

Central Government/Public Sector

CTN :44286906

12 Jun, 2026 NA

Angul - Odisha

Tender For bid to ras supply of resistance temperature detector pt-100 (rtd) , k type thermocouple ( immersion length 650 mm) , k type thermocouple ( immersion length 400 mm)

Resistance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors