Latest resistor unit Tenders | Government resistor unit Tenders

Central Government/Public Sector

CTN :45719686

13 Jul, 2026 44.90 Lacs

Cachar - Assam

Tender For repair/ maint of lt ug cables and its connected items of masimpur mil stn incl army est at khumbigram under masimpur mil stn - e & m division items, dismantling of old unserviceable/damaged acsr or aac conductors of any size , jumper from overhead line & stacking serviceable & non serviceable material separately complete all as specified and directed., dismantling of old unserviceable/damaged stay assembly embedded in concrete including demolition of pcc and removing unserviceable meterials from site of work complete all as specified and directed., dismantling of cross-arms of ms channel or angle of any sections complete all as specified and directed., dismantling of insulators of any size/type complete all as specified and directed., dismantling earth wire or copper conductor/ cradles/stay /service feeder or distribution span complete all as specified and directed, excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for laying of cable/poles and getting out in soft/loose soil complete all as specified and directed., returning, filling in trenches with soil obtained from excavation including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed., removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all all as specified and as directed., supply and laying burnt bricks of sub-class b of size 230mm x 115mm x 75mm laid in trenches for cable protection complete all as specified and as directed, supply and spread dry fine sand in trenches as sand cushioning to under ground cable for protection with fine river sand and provide reqd cover after punning down complete all as specified and directed. note: thickness of sand cushioning after punning down will be measured and paid separately., m&l for cutting existing road / pcc drain for taking out / laying of underground cable and including necessary earth work and making good to match with the existing surface with pcc 1:3:6 type ci using 20mm graded aggregates complete all as specified, taking down or out existing cable of sizes 10 sqmm to 70 sqmm 2/3.5/4 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, taking down or out existing cable of sizes 95 sqmm to 300 sqmm 3.5 core with cable cover, jointing kit from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester ) , stacking and rolling unserviceable cable for further disposal all as directed by engineer in charge. note :-(1) excavation / cutting of road or floor/ gi pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule, relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 10 to 70 sqmm 2/3.5/4 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc complete all as directed and specified. note :- lugs and glands will be measured and paid separately., relaying only serviceable cable obtained from taking out in same or new location or through cable ducts inside sub station of size 95 to 300 sqmm 3.5 core in trenches / ducts / along walls / poles / under road etc including necessary cable lugs, glands etc compl

Central Government/Public Sector

CTN :45724942

20 Jul, 2026 26.89 Lacs

Dipka - Chhattisgarh

Tender For supply of control unit assy se57110 , horn unit se57392 , sensor cable assy se53922 , sensor cable assy se53944 , sensor cable assy se53727 , sensor cable assy 20ft se59276 , dcp cylinder 20kg se57510 , nitrogen cylinder assly 0 point 5 lit se57112 , nitrogen cylinder assly 0point 5 litre se57549 , end of line resistor unit se53799 , pilot cylinder assy gl se57146 , pilot cylinder assy se57322 , dry chemical powder 1 no dry chemical powder packed in 1 kg se53753 , co2 cartridge 300 gm se53994 , rupture disc assy dcp cylinder se54686 , sensor mounting clip se54462 , nozzle bracket assy se543231 , teflon bush se543351 , dust cap se53835 , nozzle conical se535082 , main cable assy se57118 , main cable assy se57570 , main cable assy se57189 , main cable assy se573741 , pipe cross 4 way se535123 , pipe cross mtg bracket se54115 , m6 x 125 bolt se53625 , m8 x 65 bolt se53610 , m8 nut se53611 , star washer se58193 , cylinder clamp se57491 , m6 boss se53636 , m6 spring washer se53626 , coupler 1by2 inch se53518 , elbow 1by2 inch se535021 , 3by4 inch elbow with chuknut se53630 , 3by4 inch coupler se53570 , tee 3by4 inch bsp se53757 , 3by4 inch hose assy 4000 mm se5352221 , 3by4 inch hose assy 2000 mm se5352222 , 3by4 inch hose assy 1800mm se5352223 , 3by4 inch hose assy 1200mm se5352224 , 1by2 inch hose assy 800 mm se5352212 , 1by2 inch hose assy 1100 mm se5352216 , 1by2 inch hose assy 1000 mm se5358418 , 1by2 inch hose assy 1500 mm se5352210 , 1by2 inch hose assy 1600 mm se535845 , 1by2 inch hose assy 1700 mm se5352214 , 1by2 inch hose assy 1800 mm se535229 , 1by4 inch hose assy band on one end 700mm se5352279 , 1by4 inch hose assy band on one end 4000mm se5352243 , 1by4 inch hose assy band on one end 3500mm se5352227 , 1by4 inch hose assy band on one end 5000mm se5358497 , clean agent cyl assy 6kg pneuvalve se59277 , dcp cylinder mounting bracket se57519 , portable cylinder se53836 , override unit se54453 , control unit mtg bracket se57120 , nitrogen cylinder assly se57480 , distributor 5 way se535121 , over ride unit bracket se57117 , decal ground level se544681 , decal cabin se54469 , nut m6 se53634 , m10 nut se53606 , m10by40 bolt se53605 , m6 x 25 bolt se53681 , m10 x 25 bolt se53679 , m8 x 20 bolt se53608 , m8 spring washer se53609 , m10 spring washer se53607 , 3by4 inch hose assy with l bend one end 2500mm se5352262 , 1by2 inch hose assy 2000 mm se535849 , 1by4 inch hose assy l bend on both end 1800mm se5352234 , main cable assy se57281 , sensor cable assy 30ft se53729 , dcp cylinder 125 kg se57186 , clamp for dcp cylinder se57185 //bid details 2 / 65

CTN :45716595

13 Jul, 2026 4.50 Lacs

Najibabad - Uttar Pradesh

Tender For supply of fabrication c c - damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , install valve in steam line at pan no 2 550 mm 1 , install valve in steam line at pan no 2 550 mm 2 , install valve in steam line at pan no 2 550 mm 3 , install valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and install new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick //bid details 2 / 117 / / 1 1 /item category plate and depositing scrap in scrap yard , dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new pl

Central Government/Public Sector

CTN :45380397

29 Jun, 2026 25.33 Lacs

Sidhi - Madhya Pradesh

Tender For corrigendum : supply of over ride unit--se54453 , horn unit--se57392 , sensor cable assy--se53727 , cable assy main 4005n--se57501 , nozzle conical--se53508 , dust cap--se53835 , dcp cylinder 20kg--se57510 , n2 cylinder assy 0.5 litre-- se57549 , pilot cylinder assembly gl--se57146 , teflon bush--se543351 , fuse 3a--se53557 , fuse holder--se53671 , 1by2 hose assy--se535842 , control unit assy--se57110 , end of line resistor unit-- se53799 , sensor cable assembly--se53944 , nitrogen cylinder assembly 0.5 lit--se57112 , sensor mounting clip--se54462 , nozzle conical--se535082 , portable cylinder--se53836 , pipe cross 4 way--se535123 , pipe cross mtg bracket--se54115 , dcp cylinder mounting bracket--se57519 , cylinder clamp--se57491 , m10 40 bolt--se53605 , m10 boss--se53635 , coupler 1 2 in-- se53518 , elbow 1 2 in--se535021 , 3 4 elbow with check nut--se53630 , 3 4 coupler--se53570 , 3 4 hose assy--se5352221 , 3 4 hose assy--se5352224 , 1 2 in hose assy 1700mm--se5352214 , 1 2 hose assy-- se535229 , 1 4 hose assy l bend on one end 900mm-- se5352296 , 1 4 in hose assy 7000mm--se5352266 , m6 x 12.5 bolt--se53625 , sensor cable assy 30ft --se53729 , sensor cable--se53695 * /bid number : gem/2026/b/7577877 + /dated: 01-06-2026 ' ' / bid document 1 / 39

CTN :45370866

27 Jun, 2026 NA

Jharsuguda - Odisha

Tender For corrigendum : supply of afdss spares for beml make hemms -dry chemical powder_part no.se53753 , c02 cartridge _300gm__part no.se53994 , rupture disc assy - dcp cylinder_part no.se54686 , main control unit 2 zone afdss of dumper_part no.se571101 , nitrogen cylinder assembly _0.5 lit__part no.se57112 , teflon bush_part no.se543351 , over ride unit_part no.se54453 , pilot cylinder assembly _gl__part no.se57146 , horn unit._part no.se57392 , 1by4 in hose assy_ 700mm_part no.se5352279 , 1by2inch hose assy x 1800mm_part no.se5352209 , 3by4inch hose assy x 2000mm_part no.se5358452 , 1by4 ench hose assy 1800mm_part no.se5352234 , 1by2inch hose assy_part no.se535848 , cable assy- main_part no.se58712 , cable assy power supply_part no.se58713 , sensor cable assy . _ 30ft __part no.se53729 , cable assy.main_part no.se57118 , sensor cable assembly_part no.se53922 , nozzle conical_part no.se53508 , 3by4inch hose assy_part no.se5352221 , 3by4inch hose assy._part no.se5352223 , 1by2 hose assy_part no.se5352210 , hose assy.1by2inchx600_part no.se535228 , control unit assy._part no.se57110 , sensor cable assy_part no.se53727 , dcp cylinder _20kg__part no.se57510 , n2 cylinder assy _0.5 litre__part no.se57549 , pilot cylinder_part no.se53932 , end of line resistor unit_part no.se53799 , sensor mounting clip_part no.se54462 , dust cap_part no.se53835 , nozzle conical_part no.se535082 , distributor _ 5 way __part no.se535121 , pipe cross mtg bracket_part no.se54115 , dcp cylinder mounting bracket_part no.se57519 , cylinder clamp_part no.se57491 , control unit mounting bracket_part no.se57328 , coupler 1by2 in_part no.se53518 , 3by4inch elbow with check nut_part no.se53630 , elbow 1by2 in_part no.se535021 , tapped pad control unit_part no.se53884 , tapped pad dcp cyl_part no.se57119 , nozzle bracket assy._part no.se543231 , over ride unit bracket_part no.se57117 , nrv assly for 2 zone afdss_part no.se59959 , m6 boss_part no.se53636 , m10 boss_part no.se53635 , m6 x 12.5 bolt_part no.se53625 , m6 x 25 bolt_part no.se53681 , m8 x 20 bolt_part no.se53608 , bolt m8 x 65_part no.se53610 , m10 x 25 bolt_part no.se53679 , m10by40 bolt_part no.se53605 , m12 x 25 bolt_part no.se53698 , nut m6_part no.se53634 , m8 nut_part no.se53611 , m10 nut_part no.se53606 , m6 spring washer_part no.se53626 , spring washer m8_part no.se53609 , m10 spring washer_part no.se53607 , m12 spring washer_part no.se53699 , star washer_part no.se58193 , 1by2inch hose clamp_part no.se53633 , 3by4 in hose clamp_part no.se53629 , 1by4inch hose clamp_part no.se53808 , 3by4inch hose assy._part no.se5352293 , 1 by 2 inch hose assy_part no.se535842 , 1by2 in hose assy_ 1100mm_part no.se535226 , 1by2inch hose assy_part no.se5352205 , 1by4inch hose assy_part no.se5352243 , 1by4inch hose assy. l bend on one end 900mm_part no.se5352296 , 1by4inch hose assly l bend for 2 zone afdss_part no.se5352276 , 1by2inch hose assy _800 mm__part no.se5352212 , co2 cartridge _200gm__part no.se57218 , nozzle bracket_part no.se539141 , cable assy main_part no.se61452 , cable assy power supply_part no.se61453 , nozzle slit_part no.se541722 , 1by2 tee _male__part no.se57430 //bid details 2 / 54

Central Government/Public Sector

CTN :45420389

23 Jun, 2026 27.43 Lacs

Sonbhadra - Uttar Pradesh

Tender For corrigendum : supply of over ride unit , part no. se54453 , horn unit. , part no. se57392 , end of line resistor unit, part no. se53799 , dcp cylinder 20kg , part no. se57510 , nitrogen cylinder assembly 0.5 lit , part no. se57112 , pilot cylinder assembly gl , part no. se57146 , teflon bush, part no. se543351 , sensor mounting clip, part no. se54462 , portable cylinder, part no. se53836 , 3 by 4 inch hose assy 3500mm, part no. se5358419 , 3 by 4 hose assy, part no. se5352224 , 1 by 2 inch hose assy 3000 mm , part no. se535847 , 1 by 2 inch hose assy. , part no. se535846 , 1 by 2 hose assy, part no. se535845 , 1 by 2 hose assy, part no. se5352210 , 1 by 2 inch hose assy, part no. se535848 , 1 by 2 inch hose assy 1000 mm , part no. se5358418 , 1 by 2 inch hose assy 800 mm , part no. se5352212 , 1 by 4 inch hose assy. l bend on one end, part no. se5352283 , dust cap, part no. se53835 , nozzle conical, part no. se53508 , refilling kit for automatic fire, part no. se573303 , 3 by 4 inch hose assy, part no. se5358420 , 1 by 4 hose assy. l bend on one end, part no. se5352227 , sensor cable assembly, part no. se53944 , main control unit 2 zone afdss of dumper, part no. se571101 , cable assy power supply, part no. se59826 , cable assy. main, part no. se59827 , cylinder mounting bracket, part no. se57490 , cylinder clamp, part no. se57491 , 1 by 2 hose assy, part no. se535229 , elbow 1 by 2 in, part no. se535021 , nozzle bracket assy. a, part no. se54323 , nrv assly for 2 zone afdss, part no. se59959 , pipe cross 4 way, part no. se535123 , pipe cross mtg bracket, part no. se54115

Central Government And Public Sector

CTN :45436651

22 Jun, 2026 NA

Bengaluru - Karnataka

Tender For supply of dynamic braking resistor unit: 32 kw, 25 ohm, type: ss punch grid, rating: continuous, self ventilated. note: size of one unit dbr should not more than 600mmx600mmx600mm(lxbxh). [ warrantyperiod: 30 months after the date of delivery ] ]

CTN :45210458

17 Jun, 2026 NA

Kanchrapara - West Bengal

Tender For supply of transition resistor unit type d 277 for resistor box of heil/bhel emus to kpa drg. no. er/el/kpa/re.2he.307e or m/s bhel's drg no 35750030001p1. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45255107

29 May, 2026 NA

Kanchrapara - West Bengal

Tender For supply of brake chopper resistor unit suitable for under slung medha air conditioned emu rake as per medha part no. : sp675ue301001 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45120924

01 Jun, 2026 NA

Panchkula - Haryana

Tender For supply of brake chopper resistor unit for vande bhart train set as per rdso specification no.rdso/pe/spec/emu/0196-2019(rev.0) along with latest annexure and addendum/ corrigendum to m/s medha part code no sp675uv2101012 suitable for vb rakes [ warranty period: 30 months after the date of delivery ]

Resistor Unit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector