Latest resistors Tenders | Government resistors Tenders

Central Government/Public Sector

CTN :45728066

03 Aug, 2026 NA

Bengaluru - Karnataka

Tender For supply of current limiting relay (clr 2) with resistors of 550 ohms, 400 ohms, 12k ohms & ovr for memu rake, as per bhel drg. no. 05830030015. makes/brands: beil/bhel/balaji/shree shail/rashee/techno crafts/rke . [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45728073

03 Aug, 2026 NA

Bengaluru - Karnataka

Tender For supply of current limiting relay (clr1) with resistors of 550 ohms, 400 ohms & aovr for memu rake,as per bhel drg. no. 05830030016. makes/brands: beil/bhel/balaji/ shree shail/rashee/technocrafts/rke [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45715772

20 Jul, 2026 NA

Thane - Maharashtra

Tender For supply of discrete components for assembly of 15 mv linac boards - thick film resistors - sdm 1/4 watt 1 kohms 1% commercial use, analog comparators dual comparator, common mode chokes/ filters 3a 4.5mh 80m ohm horizontal choke, high-performance 30-watt, isolated dc/dc converter, multilayer ceramic capacitors mlcc-smd/smt 50v 1000pf 0603 c0g 5%, diodes- general purpose, power, switching switching diode bvr & it := 100 v, multilayer ceramic capacitors mlcc- smd/smt 1.0uf 50volts x7r 5%, thick film resistors - smd 1/4watt 510ohms 5% high power aec-q200, trimmer resistors -smd 100k 10% 1/4"squ smt multiturn, power management specialised - pmic rms-dc converter ic low cost-pwr, rectifiers diode, do-41 , 1000v, 1a, standard leds - through hole green diffused 12 volt, fmcd 1,5/12-st-3,5 24 position terminal block plug, female sockets 0.138" (3.50mm) 180° free hanging (in-line), pluggable terminal blocks 12 pos 2.5mm pitch plug 26-20awg spring, pluggable terminal blocks ifmc1,5/10-st-3,5-rf, pluggable terminal blocks imcv 1,5/10-g-3 5 rn p20 thr, pluggable terminal blocks 4 pos 2.5mm pitch plug 26-20awg spring, mcdn 1,5/12-g1-3,5 p14thr 24 position terminal block header, male pins, shrouded (4 side) 0.138" (3.50mm) vertical through hole, 24 position terminal block header, male pins, shrouded (4 side) 0.138" (3.50mm) vertical through hole, pluggable terminal blocks imcv 1,5/10-g-3 5 p20 thr, 12 position terminal block header, male pins, shrouded (4 side) 0.098" (2.50mm) vertical through hole, 4 position terminal block header, male pins, shrouded (4 side) 0.098" (2.50mm) vertical through hole, 9 pin d type connector, 15 pin d type connector, esd protection diodes / tvs diodes 3kw 24v 5% bi-directional, 10mh pulse transformer 1:1 through hole, 1000pf, tol 1%, 500v, 2 pin jst-ph-2.0 male-female connector set of 2 (2mm pitch) , metal film resistors - through hole 2watts 2.2kohms 5%, headers & wire housings minifit rtc hdr 12p dr v tin .062, centralab rv4 series potentiometer 5000000.0 ohms. 2 watts. 500 volts.rv4laysa505b panel mount, solder lugs terminals, ca509/k5wht – 5 mm wide marker blank (1 pkt = 100 tags), diodes - general purpose, power, switching 100v io/200ma bulk, omron 4pdt non-latching relay plug in, 24v dc coil, 5 a, allied connector, plc unit ethernet connectorrj45 female socket ethernet connector with plastic shell ip67, 3-phase power connector (4 pin), radiall tnc(insulated) square flange jack receptacle with solder pot contact

Central Government/Public Sector

CTN :45715777

20 Jul, 2026 NA

Thane - Maharashtra

Tender For supply of discrete components for assembly of 6 mv linac boards - isolated dc/dc converters - smd mini 1w iso un regulated dc-dc converter, aluminium electrolytic capacitors - radial leaded 1000uf 50v 16x25 high vibration, multilayer ceramic capacitors mlc, film capacitors 220pf 50vdc 2% pps film 0805, multilayer ceramic capacitors mlcc - leaded 50v 1uf x8r 10% rad ls:2.5mm aecq200, multilayer ceramic capacitors mlcc - smd/smt 50v 0.22uf u2j 1210 10%, headers & wire housings mega-fit vert hdr assy 2 ckt 15u" au, automotive connectors 1.5mm sfc, terminal loose piece, isolated dc/dc converters - through hole product type: dc/dc; package style: 2"x1"; output power (w): 30; input voltage: 9-36 vdc; output 1 (vdc): 15; output 2 (vdc): -15; output 3 (vdc): n/a, isolated dc/dc converters - through hole product type: dc/dc; package style: 2"x1"; output power (w): 30; input voltage: 9-36 vdc; output 1 (vdc): 5; output 2 (vdc): -5; output 3 (vdc): n/a, isolated dc/dc converters - smd mini 1w iso un regulated dc-dc converter, headers & wire housings mega-fit recept hsg 2 ckt v-0, headers & wire housings mega-fit crimp term tin 14-16awg, headers & wire housings 2.50 spox hsg 9p friction lock, headers & wire housings spox term 22-28g fem reel of 12000, multilayer ceramic capacitors mlcc - leaded 50v 1uf x8r 10% rad ls:2.5mm aecq200, multilayer ceramic capacitors mlcc - smd/smt 50v 0.1uf x7r 0805 5%, aluminium electrolytic capacitors - smd 50vdc 10uf 20% smd 4x5.8 aec-q200, multilayer ceramic capacitors mlcc - leaded rad 50v 10pf c0g 0.50pf ls:2.5mm, aluminium electrolytic capacitors - radial leaded 50v 33uf 35mohms smd 8x7mm, film capacitors 2200pf 50vdc 2% pps film 0805, film capacitors 22000pf 100v 1% orange drop, multilayer ceramic capacitors mlcc - leaded rad 100v 4.7uf x7s 10% ls:5mm, tantalum capacitors - solid leaded 50v 1.0uf 5%, multilayer ceramic capacitors mlcc - smd/smt 50v 0.015uf c0g 0805 1% aec-q200, diodes - general purpose, power, switching 100v io/200ma bulk, headers & wire housings 2.5mm vert hdr 9p shrouded, headers & wire housings unshrd vert sngl 2, rf connectors / coaxial connectors pc bh recept, headers & wire housings 2.5 vert hdr spox 6p shrouded, metal film resistors - through hole yr1 0.1% 634r, trimmer resistors - through hole 1/4" 1mohms 10% sq w/standoff sealed, metal film resistors - through hole 1/4watt 10kohms .1% 10ppm, metal film resistors - through hole 100kohm 1/4w 15ppm, metal film resistors - through hole 1/2w 40kohms .1%, thick film resistors - smd 1/4watt 17.8kohms 1%, thick film resistors - smd 0805 anti-surge res. 0.1%, 2kohm, trimmer resistors - smd 6.35mm 1/4" 12-turn sealed, ldo voltage regulators adj 1.1a 1x res l drop reg, analog comparators fast prec comparator, instrumentation amplifiers ad620 amplifier low drift low power, monostable multi-vibrator sngl retriggerable mono multivibrator, standard clock oscillators l pwr, 1khz to 20mhz res set sot-23 osc, active filters v low offset clk sweep bessel filter, logic gates quad 2-input and gate, precision amplifiers sgl-supply rr lo pwr fet-inpt, headers & wire housings spox crimp hsg 6p, low signal relays-pcb 1a 12vdc dpdt non-latching pcb, bipolar transistors - bjt npn general purpose, pot trimmer resistors - through hole 3/8" 100kohms sealed vertical adjust, amphenol rf rf connectors / coaxial connectors pc bh recept, aluminium electrolytic capacitors - radial leaded 1000uf 50v 16x25 high vibration, rf connectors / coaxial connectors bnc straight crimp plug rg223, 4 pole power contactor, 3 pole power contactor, rf adapter -in series bnc jack blkhd adapter iso–50 ω

corporations/Associations/Others

CTN :45702242

07 Jul, 2026 17.03 Lacs

Kota - Rajasthan

Tender For regular operation and maintenance of street lights (with material) at all industrial areas under riico ranpur kota(for 2 years) - regular operation and maintenance of high mast light in ranpur , kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register shall be maintained at riico/association office and complaint lodged must be attended by contractor within 24 hours. the person deputed by contractor shall attend the riico/association office daily and comply the instructions and attend complaints regularly. iii contractor will have to employ trained and qualified electricians for the work. iv corporation shall not be responsible for any kind of accident during execution of work. v contractor will be responsible for safety and security of fixtures and all concerned materials. vi contractor will be responsible for arrangement of all t&p required for the work vii cost of all labour and material like lamp / balllast wire etc. will be born by contractor. all material required for the work shall not be below the category-ii of concerned bsr item. contractor has to repair and maintenance of fixture with material in all cases like short circuit, phase to phase of jvvnl line etc. viii no extra payment will be made for fixing/removal of extra/existing fixture in the industrial area. ix contractor will be responsible for timely collection and deposition of electric bills of areas in each month. in case of delay in payment and jvvnl impose surcharge for delay payment the same will be recovered from the running bill fo the contractor. payment of electricity bill will be made by riico. x contractor will be responsible for rebate of timer provided by jvvnl. hence contractor will maintain the on/off system by timer properly. in case no rebate is provided by jvvnl due to failure of timer then rebate will be deducted from contractor payment. xi contractor will be responsible for any theft of electricity through poles and he will make necessary arrangements for this. in case of any theft is found suitable penalty will be imposed on the contractor. xii contractor will maintain cubical panel board and assessories fitted in it. in case of any fault repair/replace of material will be done by the contractor at his own cost. no extra payment will be made on behalf of material. xiii contractor has to keep ready total fixtures. in case of fault of fixture a penalty of rs.100/- per fixture per day will be imposed on the contractor., regular operation and maintenance of street light fixtures hpsv/ hpmv (70w/150w) in ranpur, kota including supply and replacing the required material and labour etc. complete as per the following terms and conditions:- i at any moment a minimum of 90% of total fixture must be in order. the defective fixture must be repaired within 3 days, falling which deduction for number of light which are not functioning in the industrial area shall be made at one time of the rate (accordingly deduction for lights which are not functioning becomes two times of the rates from total payment due for total number of lights whose operation and maintenance was awarded to the contractor ). ii contractor shall arrange at his cost for put on & off the street light fixture at appropriate time regularly as per instructions of engineer-in charge. a register sh

CTN :45723969

08 Jul, 2026 NA

Sitapur - Uttar Pradesh

Tender For electricity distribution block and head] c.t.p.t. unit of various relays in the area of work of sitapur] metering cubicle p.t.] electrical sub-station etc. material of electricity storage center sitapur to electrical test section sitapur and from electrical test section sitapur to the site work of installation designation jim rntpekpabjpvd vf mmm. appjanchanat

CTN :45736304

17 Jul, 2026 NA

Multi City - Multi State

Tender For resistors (commercial grade)

CTN :45399903

06 Jul, 2026 7.53 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of printed stationery items at stps, suratgarh. - pay bill gazzetted (pad of 100 sheet) , orderly and thermal allowance (pad of 100 sheet) , pl application form (pad of 100 sheet) , absentee statement (pad of 100 sheet) , covering letter (pad of 100 sheet) , hr performa (pad of 100 sheet) , pcb voucher (pad of 100 sheet) , nac (not available certificate) (pad of 100 sheet) , acr form for tech staff (pad of 100 sheet) , ot decleration sheet (pad of 100 sheet) , medical reimbursement(pad of 100 sheet) , fvc form (pad of 100 sheet) , indent book cos-17-18 , field register (of 100 sheet) , ot book in triplicate , receipt register (of 100 sheet) , dispatch register (of 100 sheet) , stock register 370 p+15 index , stock register 170 p+ 15 index , vehicle driver log (book of 100 sheet) , c-1 register (size20"x15") (register of 100 sheet) nge , peon book (size 8.5"x6.75") (book of 100 sheet) , c-2 register (size 10"x15") , mrc register(of 100 sheet) , ta bill form (gazetted) (pad of 100 sheet) , pcb , c-5 , register , defect log book (of 100 sheet) , permit issue register (of 100 sheet) , attendance register size 10"x15" (of 14 sheet) , cash book register , work identification memo book , electricity no-dues certificate (of 100 sheet with dublicate copy, book no and page no. , memo for payment , cash book of account , journal voucher (emd to sd convertation) , journal voucher (adjustment) , card sheet for monthly payment for each work order (pink , service book (100 pages) size 8" x 13" , dc register (8.5"x13.5") , sg register (8.5"x13.5") , daily generation data register (register of 100 sheet) , generation loss register (register of 100 sheet) , ems of xen store wings , pcb covering letter(pad of 100 sheet) , cos-15 mcn book , store inward register cos -6 , supply bill covering letter , arranging inspection letter , supply completion report(for store use)( , priced srn / sin cover letter , srn book , gate pass book (store) , cos-14 (100 sheet) ledger with index a to z (13.5"x17") , bin cards (small card) (material identification card) size 7.33"x4.67" , cos-23 register (scrap) , cos-14 (200 sheet) ledger with index a to z (13.5"x17") , ems of s.e. operation support wing , control room fans panel log sheet unit-1st/2nd/3rd/4th/5th/6th , control room mill log sheetunit-1st/2nd/3rd/4th/5th/6th , control room steam & water log sheetunit-1st/2nd/3rd/4th/5th/6th , control room turbine panel log sheet unit-1st/2nd/3rd/4th/5th/6th , control room generator panel log sheet unit-1st/2nd/3rd/4th/5th/6th , boiler operating floor (19.5meter) log sheet , id/fd/pa fans log sheet unit-1st/2nd/3rd/4th/5th/6th , mills area log sheet unit-1st/2nd/3rd/4th/5th/6th , boiler feed pump area log sheet unit-1st/2nd/3rd/4th/5th/6th , turbine operating floor / lub oil pump /oil coolers centrifuge log sheet unit-1st/2nd/3rd/4th/5th/6th , condensate extraction pump log sheet , hydrogen seal oil system log sheet unit-1st/2nd/3rd/4th/5th/6th , esp log sheet unit-1st/2nd/3rd/4th/5th/6th , ht (6.6 kv) lt (415 v) switch gear log sheet , cooling tower log sheet unit-1st/2nd/5th , compressor plant log sheetunit-1st/2nd/3rd/4th/5th , compressor plant log sheet unit-6 , 400kv switch yard transformer log sheet , 400kv switch yard log sheet , raw water log sheet stage-1/2/4 , assistant engineer (boiler) log book u#1 to 6 , assistant engineer (ca & elect) log book u#1 to6 , assistant engineer (turbine) log book u#1 to 6 , diesel generator register , ptw book in duplicate (9"x11') , meeting agenda register , ca equipment running hrs. register , raw water running hrs register , boiler/turbine equipments running hours register , tripping register , boiler/turbine/ca & electrical reading register , sadc register , day tank of fuel oil logsheet , 220 kv switch yard logsheet , dmccw system stage- 2nd/3rd/4th log sheet , c.w/a.cw pump house area stage -2nd/3rd/4th log sheet , intake pump house logsheet , shift incharge log book , details of gun clea

State Government

CTN :45573763

06 Jul, 2026 1.99 Lacs

Basti - Uttar Pradesh

Tender For corrigendum : supply of material required for operation and maintenance of various 132/33 kv sub-stations under electricity transmission division-ii, basti h.q. at siddharth nagar

Central Government/Public Sector

CTN :45702701

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of rolling stock - condemned and unserviceable bg demu coach no. special repair dpc 008073 with available items [refer enclosure for the material composition]. location: coach care centre tpj/diesel loco shed goc. custodian: sse/demu/diesel shed/goc. re-claimable items - [1] wheel sets with bull gear-04 sets [2] 8v 450ah lead acid battery-03 nos [3] 6v batteries-18 nos [4] truck assembly-02 sets [5] axle box with bearings-08 nos [6] buffer complete-02 nos [7] schaku coupler assembly[draw bar with hook, draft gear assembly]-01 set [8] brake cylinders-04 nos [9] wear pieces(brass)-04 nos [10] dpc main doors-02 nos. advice note no.073817-25-08698, dt: 11.12.25. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold coach, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition- [1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery. [2] in order to make the assessment, the purchaser may visit the coach offered for condemnation and the site conditions before quoting the offer.[3] the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment. [4] the weight and quantities were taken into consideration as advised by the custodian [5] the purchaser may note that reclaimable items of coach are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements, especially traction motors should be removed by using proper tools and equipments without causing damage to truck assembly [6] the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the coach as directed by the custodian. [7] the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean, free of any left over coach scrap. [10] railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15] if any hsd oil/lube oil available in fuel tank/oil sump of the said coach, the same may be returned to the custodian.(location: coach care centre tpj / diesel loco shed goc)

Resistors Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector