Get complete information related to latest Respiratory Mask Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Respiratory Mask Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Respiratory Mask Tenders.
Tender For supply of ss sheet sus 301l-dlt - dull finish of size 2 mm x 1250/1500 mm x 2150 mm to jis g 4305 standard. special condition : i) the sheets/plates shall be supplied in bundles with double layer of water proof paper & a bio degradeable plastic sheet of suitable thickness and metal protection in edges. all the sheets up to 2mm thickness shall be protected against corrosion and rust by coating corrosion preventive fluid, soft film, solvent deposited, water displacing to is: 1154. ii)all bundles shall have a minimum of 2 hoopsup to 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling.iii) optimum weight of the bundle should be 2mt+-10%. mechanical damange & corrosionduring transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of neoprene rubber cap (canopy) for condensor motor protection from rain water as per sr.dee (chg) bct's drawing no. raj/253/06 dt. 26/12/2006 , neoprene rubber grade hardness : 50-55 material shall be fire reterdant as per is: 7809 part - ii & rubber is as per irs r- 48-88. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs] ]
Tender For supply of motor protection circuit breaker (mpcb) for compressor unit and heater unit, current rating 7-10 amp, thermal release range 10-16 amp, class-10, breaking capacity 10ka, 3-pole, voltage rating 415 v ac, conforming to is/iec 60947-2; conforming to rdso spec. no. rdso/pe/spec/ac/0184-2015 (rev. 1); suitable for use in switchboard cabinet of lhb type ac coaches. accepted make & cat. /model no.: rdso-approved make and model as per common bom serial no. 39 of rdso letter no. el/7.1.108/mssbc dated 17.09.2021, make :-abb,legrand,schneider,l&t,siemens and eaton. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs] ]
Tender For supply of kit for breakaway protection valve as per ftrtipl part number 790019105 consist of 12items as per attached annexure. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of rcbo (residual current circuit breaker with over current protection) , 4 pole, 16 amps,415 v ac, sensitivity 30ma, breaking capacity 10 ka, din rail mounted to legrand model no:603395 or similar. acceptable makes: l&t, schneiner, legrand,siemens, abb, havells, eaton, bussmann. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For purchase of painting items - purchase of painting items, enamel white make: asian / jotun/ growel sample required, enamel p.o red make: asian / jotun/ growel sample required, enamel black make: asian / jotun/ growel, epoxy phirozha grey make: asian / jotun/ growel, rough roller brush ( cotton) reusable type make: asian / jotun/ growel, brush (flat type ) make: asian / jotun/ growel, water paper make: asian, grade 80,23 cm*28 cm, epoxy grey primer make: asian / jotun/ growel, epoxy thinner make: asian / jotun/ growel, banian waste, red oxide metal primer make: asian / jotun/ growel, turpentine (enamel) make: asian / jotun/ growel, putty blade 4" square, water paper make: asian, grade 120,23 cm*28 cm, rough roller brush ( cotton) reusable type 7", flat brush 4", marking black pencil, chemical protection gloves ultra nitrile , length above 30cm thickness : above 3mm, total face shield material : acylic provision for head band adjustment, respiratorymask with catridge size : medium, model : 3m 6200, catridge for the above mask 3 m, fuel transfer pump material plastic , manually operating, stencil cutter with blade model ; m9, length : 5.5", antiskid epoxy paint with hardner green make : asian / jotun/ growel, epoxy black make : asian / jotun/ growel, safety ear cuf (protector) for noice reduction
Tender For set of items consisting of : (1) universal tool suitable polyvinyl chloride or similar material for welding and shrinking with 2 step airflow switching and steplessly adjustable temperature, protection glass with brushless motor and sturdy heating element. supply voltage : 230 v(ac) power : 2000-3000w temperature : 20-650 degree c size : 195mm x 85mm x 160 mm (approx.) handle : 57mm (approx.) weight : 0.9-1kg , quantity : 1 no. (2) speed welding nozzle 5mm, qty 1 no. (3) tubular welding nozzle (dia %u2013 32mm) dia -5mm push fit, qty -1 no. make/model -leister/ghibli/solona at, wegner/aritherm, forsthoff/oval-q [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variationpermitted: max 8 lacs ] ]
Tender For supply of public health material supply - bleaching powder (isi marked) — per kg , black phenyl — per liter , slaked lime powder — per kg , pyrethrum — per liter , abate — per liter , lysol — per liter , diflubenzuron — per liter , broom — per unit , spade — per unit , dustpan — per unit , crowbar — per unit , sickle — per unit , pitchfork — per unit , gutter scoop — per unit , pickaxe — per unit , gloves — per pair , hand trowel — per unit , brush — per unit , raincoat — per unit , gum boots — per pair , respiratorymask — per unit
Tender For e-tender for the supply of various implants and consumables for department of cardiology of r.g. kar mch - temporary pulse genarator - single chember with patient cable(rates for each sub item must be given, cummulative lowest bidder will be treated as l1 bidder), temporary pulse genarator - single chember, patient cable for temporary pulse genarator - single chember, carotid balloon, close tapered carotid stent, single size distal protection device, bmv ballon with set, conduction system pacing - assorted sizes(rates for each sub item must be given, cummulative lowest bidder will be treated as l1 bidder), lbbb lead for conduction system pacing, his sheath for conduction system pacing, slitter for conduction system pacing, coronary snare system, guide extention catheter, amplatz super stiff wire - ptfe coated, distal spring coil, 260cm, coronary cover stent, long sheath - assorted sizes, peripheral angioplasty balloon - assorted sizes
Tender For internal electrical installation and wiring of newly constructed administrative building including supply of all materials at barasat 220kv s/s under barasat area office, wbsetcl as per schedule - supplying and fixing double door vertical tpn 160a mcb distribution board (8way), for mccb incomer with ip-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-11 item no 15. (legrand make) , supplying and fixing 415 v 125 a (4p) four pole mccb of breaking capacity 25ka/35ka with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing dbs / enclosure and necessary connection. pwd sch page d-08 item no 10. (legrand make), , supplying and fixing 240/415 v sp mcb (6-32)a (for out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07. (legrand make), , single phase lighting distribution, , supplying and fixing double-door (2+12 way) spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. pwd sch page d-9 item no, , supplying and fixing 240/415 v 32a dp mcb (incommer) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , supplying and fixing 240/415 v (6-32)a sp mcb (out going) of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection. pwd sch page d-6 item no 07., , point wiring, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with modular type switch (brand approved by eic) fixed on modular gl switch board with top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 1. (iii) (average run 8 mtrs), , point wiring on board, , distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'fr' pvc insulated & unsheathed single core stranded copper wire (brand approved by eic) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 v 6a 5 pin plug point incl. s&f 240 v 6a 3 pin modular type plug socket & modular type switch (brand approved by eic) incl. s&f earth continuity wire, fixed on 4 module gl switch board with 3/4 module top cover plate flushed in wall incl. mending good damages to original finish. pwd sch page e-20 item no 3(i), on, , concealed cutting channel, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , cutting channel of 31 mm x 31 mm size on masonry wall incl. s&f heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 swg gi wire fish wire incl. mending good damages to building works. pwd sch page e-2 item no 2a. 13 mm dia 3 mm thick polythene pipe without earth, , distribution wiring, , 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (5 sqmm) as ecc, pwd sch page e-9 item no 1. make: kei/mescab/finolex, , 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ecc, pwd sch page e-9, , 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sgmm) as ecce) 4x126/0.4 (16 sqmm)+2x80/0.4 (10 sgmm) as ecc, pwd sch page e-9, , 4x80/0.4 (10sqmm) + 2x84/0.3 (6 sqmm) as ecc, pwd sch page e-9, , air conditioner, , supply & fixing 240 v, 25a modula