Latest retainer carrier shaft Tenders | Government retainer carrier shaft Tenders

CTN :45719844

20 Jul, 2026 25.04 Lacs

Murshidabad - West Bengal

Tender For procurement of spares for booster pump for sgtpp - procurement of procurement of spares for booster pump for sgtpp., rotor assy. booster pump-fa1b75 for mdbfp of 500 mw , (balanced condition), set contain one shaft, one impeller, impeller neck ring-02 nos, thrust collar, coupling key, pump drg. no- ( drg. no-hy-dg-373-139-a017 moc-shaft-bs-en-10250-4, impeller-bs-en-10213-2, impeller wear ring-bs-en-10213-2, approximate dimension- impeller od-753 mm, impeller width from neck to neck-246, impeller neck od-300 mm, neck id-265 mm, neck width-45 mm, shaft dia at impeller position-84.85 mm, no of vains-06. approximate shaft length-1725 mm, shaft run-out should be within 0.05 mm. for mdbfp , direction of rotation-anti clowise viewed from non-drive end. rotor assembly should be in balanced condition. balancing document should be submitted during delivery. all give dimensions are approximate & actual dimensions must be at per give drawing no. ), impeller for booster pump-fa1b75, for booster pump of 500 mw. , part no-2 , pump drg. no-hy-dg-373-139-a017, moc- bs en 10213-2 ( in balanced condition. balancing document should be submitted during delivery. moc-impeller-bs-en-10213-2, approximate dimension- impeller od-753 mm, impeller width from neck to neck-246, impeller neck od-300 mm, neck id-265 mm, neck width-45 mm, shaft dia at impeller position-84.85 mm, no of vains-06. all give dimensions are approximate & actual dimensions must be at per given drawing no. ), shaft for booster pump-fa1b75 for booster pump of 500 mw. , part no-5 , pump drg. no-hy-dg-373-139-a017, moc-bs en 10250-4 or equivalent ( shaft run-out should be within 0.05 mm. moc-shaft-bs-en-10250-4, approximate shaft length-1725 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. ), impeller nut, booster pump-fa1b75 for booster pump of 500 mw , part no-13, pump drg. no-hy-dg-373-139-a017, nut thrust collar for booster pump-fa1b75 , pump drg. no-hy-dg-373-139-a017, casing wearing ring, f-m/cd-bp-fa1b75 for booster pump ( moc-fv 520 b (13% cr. steel). approximate dimension od-340 mm, id-320 mm, width-45 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. ), wearing ring,impeller,fa1b75 for booster pump fa1b75 ( moc-bs-en-10213-2, approximate dimension od-320 mm, id-300.20 mm, width-45 mm, all give dimensions are approximate & actual dimensions must be at per give drawing no. )

CTN :45716434

14 Jul, 2026 NA

Mau - Uttar Pradesh

Tender For providing of custom bid for services - checking & replacement of broken 01 set knife holder of cane cutter trueness checking of shaft & dynamic balancing

CTN :45739360

15 Jul, 2026 2.44 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of stage sleeve , c i impeller , balancing disc , counter balancing disc , bearing housing , s p sleeve l h , s p sleeve r h , diffuser c i , h t stud 10 x 65 mm , o ring and gasket set , spacer sleeve suction , ss shaft with key for ksb make feedpump model 65 7 rpm 2900 , rubber o ring

Central Government/Public Sector

CTN :45470553

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of spares for aeration tank -shaft with impeller assembly for aeration tank gearbox,as per drawing 10-m-58 & 10.m.67, dynamic balancingshould be required , 1 shaft for aerator fan of aeration tank gear box ,as perdrawing 10-m-67, dynamic balancing should be required

CTN :45697950

06 Jul, 2026 14.38 Lacs

Budgam - Jammu And Kashmir

Tender For spares parts for stone crusher abhishek 20 tph em no 21l 39014 of 122 rcc - jcap a02 22 54 pitmen bearing 22238 , jcap a02 28 60 bkt seal gland 10x10 , jcap a02 29 61 bkt cover seal o ring dia 5mm , jcap a02 30 62 pitmen cover o ring dia 5mm , jcap a02 16 48 bkt bearing , jcap a02 21 53 cam shaft , jcap a02 23 55 pitmen outer cover , jcap a02 09 41 balancing weight , jcab a01 005 5 toggle bearing , jcap a02 24 56 pitmen outer cover bolt , 10005607 air filter inner , 10005606 air filter outer , jcab a01 003 3 side plate , jcab a01 004 4 toggle plate , jcab a01 0055 toggle bearing , jcap a02 03 35 swing jaw plate bolt , jcap a02 04 36 swing jaw plate nut , cua 500a12 11 202 bearing , cua 5001a2 15 206 carrier roller std , cua 500a12 17 208 impact roller , cua 500a12 18 209 carrying roller , cua 500a12 24 215 return roller , jcab a01 000 7 toggle bolt , sba a09 15 148 wire mesh 40mm deck 1 , sba a09 16 149 wire mesh 20mm deck 2 , sba a09 17 150 wire mesh 10mm deck 3 , cua 650 a13 13 250 draw bar bolt adjuster screw , jacb a01 006 6 toggle block , jcap a02 02 34 swing jaw plate , jcap a01 002 2 fixed jaw plate , cua650 a13 02 239 main conveyor belt

Central Government/Public Sector

CTN :45019582

08 Jul, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : rate contract for spares of lt howden for boiler fans, aph and fgd plant - stop ring,ni 0511000&4,l&t-howden,boiler, labyrinth seal,ni 0511000/17,l&t howden, labyrinth seal,ni 0511000/18,l&t howden, gasket-hub end,ni 0511000&25,l&t-howden, gasket-drive end,ni 0511000&26, pawl,ni 0511000&27,l&t-howden,boiler, compression spring,ni 0511000&28,boiler, breather 2,ni 0511000&44,l&t-howden, breather 1,ni 0511000&45,l&t-howden, o-ring,ni 0511000&51,l&t-howden,boiler, glacier bushing,mb 8060 du,l&t-howden, u-seal,ni 0511000&86,l&t-howden,boiler, split bushing,rda-9002598-5,l&t-howden, friction disc,9004536-5,howden,2x660mw, drive assy,rda-9005220-5,l&t-howden, reducer,rda-9013580-5,l&t-howden, flexible metal hose,rda-3079197-0, flexible metal hose,rda-3079198-0, bushing,3105920-0,l&t howden,boiler, tightening tube,3105919-0,l&t howden, balancing block,5131715-0,l&t howden, ring,4105899-0,l&t howden,boiler, variseal,9118673-5,l&t howden,boiler, o-ring,9105348-5,l&t howden,boiler, glacier bushing,9105913-5,l&t-howden, hub,9105914-5,du glacier, bonded seal,9110124-5,l&t-howden, o-ring,9105347-5,l&t howden,boiler, slide shoe,4105378-0,l&t howden,boiler, s-ring,9105876-5,l&t howden,boiler, intermediate disc,2105386-0,l&t-howden, pawl,3105205-0,l&t-howden,boiler,800mw, pin,4105206-0,l&t-howden,boiler,800mw, variseal,9118676-5,l&t howden,boiler, variseal,9118677-5,l&t howden,boiler, gasket,4-048457-0,l&t-howden, tight fitting screw,4142672-0,l&t-howden, bushing,4-054501-0,l&t-howden, tightening ring,4-053521-0,l&t-howden, ring,4-012569-0,l&t-howden, glacier bushing,4-102359-0,l&t-howden, tightening disc,4-053523-0,l&t-howden, locking strip,4-019155-0,l&t-howden, o-ring,9-008282-5,l&t-howden, slide shoe,4103917-0,l&t-howden,boiler, s-ring,9003294-0,l&t-howden, glacier bushing,9-003167-5,l&t-howden, gasket,4-048457-0,l&t-howden,boiler, o-ring,9100119-5,l&t-howden, gasket,4-048457-0,l&t-howden, rotating oil seal,5-115299-0,l&t-howden, glacier bushing,9-003175-5,l&t-howden, felt strip,9-005220-5,l&t-howden, screw,4-015598-0,rdai, regulating dr assy,1-1184990-0, regulating dr assy,1-1184990-0, comp pull fork,3-115510-0,l&t howden, comp hyd hose,rda-4212762-0,l&t-howden, comp hyd hose,rda-4212764-0,l&t-howden, flare tube fitting,rda-9128702-5, bushing,4121761-0,l&t-howden, bushing,4108154-0,l&t-howden, pin,9146562-5,l&t-howden,boiler,800mw, pin,9146561-5,l&t-howden,boiler,800mw, disc,4121717-0,l&t-howden,boiler,800mw, lock plate,4121716-0,l&t-howden,boiler, key,9004146-5,l&t-howden,boiler,800mw, slide shoe,4142368-0,l&t howden,boiler, pawl,3122702-0,l&t-howden,boiler,800mw, pin,4108138-0,l&t-howden,boiler,800mw, gasket,4-048457-0,l&t-howden,boiler, fitting bolt,4142672-0,l&t-howden,boiler, blade bearing,3146211-0,l&t howden, lock plate,4121716-0,l&t-howden,boiler, key,9004146-5,l&t-howden,boiler,800mw, tolerance ring,9146170-5,l&t-howden, ext labyrinth seal,mba-np 051407,boiler, int labyrinth seal,mba-np 051408,boiler, nozzle,mba-np 051510,l&t-howden,boiler, nozzle,mba-np 051515,l&t-howden,boiler, orifice,mba-np 051530,l&t-howden,boiler, labyrinth seal,np 051600,l&t howden, glacier bushing,mba-gb6550 du,l&t-howden, lock washer 145,mba-np 051350,l&t-howden, pressure spring,mba-np 051418,l&t-howden, gasket,mba-np 051415,l&t-howden,boiler, gasket,mba-np 051416,l&t-howden,boiler, sector plate assy,125/03,l&t-mhps, hyd cylinder,v8512842,flaktwood,id fan, impeller blade shaft,112,flakt, bearing cap,flaktwood,pfsu-450-300-id, bearing,0104,flaktwood,pfsu-450-300-id, blade holder,113,flakt, axial bearing,115,flakt,boiler, bell housing,flaktwood,pfsu-450-300-id, bell housing,0131,flaktwood, blade shaft cone,v8

CTN :45657642

11 Jul, 2026 36.28 Lacs

Tinsukia - Assam

Tender For supply of s. s. shaft with key and nuts , s. s. impeller 1st stage , s. s. impeller 2nd stage , s. s. gland with studs and nuts , s. s. impeller neck ring de , s. s. impeller neck ring nde , s. s. shaft sleeve de , s. s. shaft sleeve nde , s. s. interstage partition bush , s. s. bearing cartridge de , s. s. bearing cartridge nde with cover and screws , s. s. wear ring , o ring insert , o ring for stuffing box , o ring for shaft sleeve , sleeve nut , gland flange , shaft sleeve , shaft , impeller , stage ring , disc seat , stage bush , discharge bush , splash ring , bracket upper half , bearing covernde , seal cover , bush bearing , distance sleeve , impeller key , seal cage , balancing disc valve

CTN :45509948

01 Jul, 2026 70.00 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : supply of electro-mechanical & instrumentation items for mass balancing reservoir (mbr- supply of pump starter panel including individual vfd for 125 kw (02w+1s), supply of 1.1 kv grade cable- aluminium conductor supply, laying, testing & commissioning 1.1 kv grade, xlpe insulated, stranded aluminium conductor cables, a) 3.5 c x 185 sq.mm, b) 3.5 c x 300 sq.mm, 1.1 kv grade, xlpe insulated, stranded copper conductor, galvanised steel flat strip / round wire armoured, extruded pvc type st2 sheathed, heavy duty cable, a) 3 c x 2.5 sq.mm, supply of gi perforated type cable trays with returned edge / flange, fabricated from 2.0 mm thick sheet steel in the standard length of 2.5 mtrs, duly hot dipped galvanized after fabrication as per is 2629-1989 / is 4759-1984 including accessories such as coupler plates/ fish plates, bends, tees, reducers, elbows, covers and electro-galvanized hardware etc, erected on existing support as per specification, a) 450(w) x 75(h) x 2.0 mm thick, b) 300(w) x 35(h) x 2.0 mm thick, c) 100(w) x 35(h) x 2.0 mm thick, mechanical items, supply of di pipes k-9, dia 500mm, di fittings 500mm, , , , , , for 300 mm dia butterfly valve, for 500 mm dia butterfly valve, for 600 mm dia butterfly valve, instrumentation items, non-return valve 300 mm dia, , , , supply 10cx 1.5 sq.mm signal cable, supply 1px 1.5 sq.mm signal cable, supply 2cx 1.5 sq.mm signal cable, supply horizontal end suction pump 780m3/hr @40m head, impeller: ss, shaft: ss, casing: ci including pumps with mechanical seal. 120 kw 2w+ 1s, supply of 1/2" pressure gauge 0-10 bar,, supply of butterfly valve, supply of electric actuator, supply of electromagnetic flow meter 500 mm dia, supply of expansion bellow, supply of pressure transmitter, 0-7 kg/cm2,, supply of zero velocity valve 500mm dia

State Government

CTN :45655517

01 Jul, 2026 NA

East Nimar - Madhya Pradesh

Tender For work contract for repairing/ refurbishment/ dynamic balancing of ht/ lt motors rotor shaft and housings installed at emd-ii unit 03 and 04 of 2x660mw sstpp, stage-ii, mppgcl, khandwa.

State Government

CTN :45645599

24 Jun, 2026 NA

Rohtak - Haryana

Tender For carriage charges /carriage charges / expost facto sanction for repair of 50 hp motor at 2and water works rohtak , motor opening and fitting labour /all. / ex-post facto sanction for repair of 50 hp motor at 2and water works rohtak , providing and fixing motor connection plate 150x150 /new plate / ex-post facto sanction for repair of 50 hp motor at 2and water works rohtak , providing and fixing of ball bearing 6311 of skf make complete in all respect. /6311 / ex-post facto sanction for repair of 50 hp motor at 2and water works rohtak , shaft balancing / ex-post facto sanction for repair of 50 hp motor at 2and water works rohtak , rotter sleeve / ex-post facto sanction for repair of 50 hp motor at 2and water works rohtak

Retainer Carrier Shaft Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government