Latest retainer grommet Tenders | Government retainer grommet Tenders

Central Government/Public Sector

CTN :45555761

24 Jun, 2026 NA

Bhopal - Madhya Pradesh

Tender For supply of set of yellow colour diamond grade ldp(long distance performance) reflective sheeting to icf drg. no. slr2-8-3-201, alt-m/nil consisting of 02 items. each item having 03 pieces to form the cross 1) size: 100 mm width in tape form to fit in rectangle of 600 mm x 800 mm = 01 cross. 2) size: 125 mm width in tape form to fit in rectangle of 1200 mm x 800 mm = 01 cross. make:3m 3971 or similar [ warranty period: 30 months after the date of delivery ] ]

CTN :45418801

20 Jun, 2026 1.50 Lacs

Kangra - Himachal Pradesh

Tender For corrigendum : supply of rjo 1 brake shaft bucket , rjo 9 spring for adjusting bolt , rjo 8 nut for adjusting bolt , rjo 23 supporting spring , rjo 24 stud , rjo 20 brake strap with lug , rjo 21 brake lining set , rjo 22 guide plate , rlo 1 horn switch , rlo 5 ignition switch , rlo 6 lighting switch , rlo 10 filter cap , rlo 11 filter for tank , rmo 1 hose delivery , rmo 5 hose coupling male , rmo 6 nozzle , rmo 8 hand pump , rmo 11 hose clip , rio 61 bearing , rio 67 lock nut with bearing , rio 68 bush , rio 64 bearing , rio 69 bearing housing back , rio 70 shin set , rio 72 stud , rio 4 bearing , rio 12 bearing , rio 15 bearing , rio 9 stud , rio 10 locking wire , rio 11 lock nut , rio 14 inner distance pieces , rio front clumping plate , rio 17 clutch casing sleeve , rio 19 cheese head bolt , rio 57 lock nut locking , rio 71 covertor bearing housing , rhh 2 spiral bevel wheel , rhh 3 bearing , rhh 4 first inter shaft pinion , rhh 5 distance pieces , rhh 6 first inter shaft pinion , rhh 7 distance washer , 2e005383 fip * /bid number : gem/2026/b/7573915 + /dated: 03-06-2026 ' ' / bid document 1 / 35

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :45429716

16 Jun, 2026 NA

Multi City - Maharashtra

Tender For auction sale of pway scrap - scrap pway fitting consisting of sej small fitting, fitting for switches, fish plate, stud bold,xing bold, ci block, sej chair plate, gauge tie plate, slide chair, meal liner, rail screw, clamp, tie bar patti, distance block, fish bolt, rail cut pieces below 2mtr, sej angle, bearing plate, st sleeper, ci block, cut pcs of rails below two meters, screw key, inserts, digging bar, nut bolts of sort and sizes including xing bearing plate, and other similar types of pway fittings items with or without nut, bolt and other attachments.location - b by 1 near office

Central Government/Public Sector

CTN :45431594

11 Jun, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s ci sej plate, ci pully, distance blocks, cst 9 port cut pieces, cst 9 ports, acb plates, base plate, ci plates, ci block, fitting of sej, and other ci items (location ¿ n/r godown no 6) delivery- by weight

Central Government/Public Sector

CTN :45400956

09 Jun, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, drake beam and truss bar, nut- bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate,, bottom plate, sbs plate, anchor plate. hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw cupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly, main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, sielent block yoke pin support plate, lashing chain, buckle, roller backing ring, spacer, distance ring, cone assly and other parts of ctrb wire supporting hook, prptecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, front and back cover of door cylinder clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod.coupler rod, cbc rear plate, roller, cone, backing ring, spacer, distence ringsmall cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis). as per e-auction terms and condition goverining sale of scrap material through e-auction (revised on 07.05.2026), delivery of any scrap lot shall be permitted only after receipt of full sale value of sold lot.

CTN :45392349

03 Jun, 2026 NA

Gonda - Uttar Pradesh

Tender For supply of set of main drive roller with collar as per ref. no.1 of els/lgd drg.no.c/els/lgd/pwl/ 2/3 & set of taper rings along with distance pieces for roller bracket assembly as per drg.no.c/els/lgd/pwl/ 2/2. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45374731

06 Jun, 2026 1.20 Lacs

Bhandara - Maharashtra

Tender For fabrication of pantoon, drum pantoon, distance pieces for monsoon dewatering purpose at quarry pit of d.b.mine

Central Government/Public Sector

CTN :45335354

08 Jun, 2026 NA

Nasikcity - Maharashtra

Tender For supply of modified distance pieces for 4601 az tm armature each type should be separately packed in one kg polythene/bag .drg no.4.tmw/drg/emu/4601 az/005 alt.1. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45220290

26 May, 2026 NA

Multi City - Karnataka

Tender For auction sale of others - scrap condemned, released and unserviceable linen scrap such as bedsheet cotton, pillow cover cotton, pillow cover polyvastra, hand towel, blanket, pillow 2nd/3rd ac, pillow 1st ac (1) on as is where is basis under the custody of sse/c&w/sbc as declared vide ds-8 no. 230404 dated 24.02.2026. total quantity: 18.202 mt approx consisting of (i) bedsheet cotton- 30900 nos-12.978 mt. (ii) pillow cover cotton- 19850 nos- 1.4292 mt. (iii) pillow cover polyvastra- 3500 nos- 0.3745 mt. (iv) hand towel- 19020 nos- 1.902 mt. (v) blanket- 1000 nos- 1.221 mt. (vi) pillow 2nd/3rd ac- 500 nos- 0.2015 mt. (vii) pillow 1st ac- 236 nos- 0.09558 mt. (2) location: (a) boot laundry at sbc-container no.2. (b) old box room, parcel shed, platform no.1/sbc. (3) weighment facility available at a distance of 3 km from the site. (4) road approach: (a) boot laundry at sbc- container no.2- yes. (b) old box room, parcel shed, platform no.1/sbc.- 200 mtrs lead. (5) bedsheets and blankets are cut into 2 or more equal pieces, rest of the linen are stencilled as condemned. (6) segregation is not permitted. (7) if any extraneous material found in the lot, the same should be handed over to the custodian at the time of delivery. (8) delivery on actual weighment basis only (9) neighbouring undeclared and nfs items shall not be disturbed. (10) humidity or moisture factor not to be considered during lot delivery. (11) purchaser to survey the material for road approach, location and quantity before bidding to the lot. after bidding no correspondence will be entertained.

Retainer Grommet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector