Latest retainer seal Tenders | Government retainer seal Tenders

Central Government/Public Sector

CTN :43039846

09 Dec, 2025 NA

Kota - Rajasthan

Tender For supply of filling pipe cap sealing gasket as per drg. no. wd-btpn-2 alt-2 (rev-3) (may-2025) with latest alteration, item no. 3, material-neoprene.

Central Government/Public Sector

CTN :43015262

29 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of valves with variety of seat material and actuation configurations c c - 2108329 , 2136102 , 2136101 , 2108326 , 2108325 , 2111440 , 2111441 , 2111442 , 2115085 , 2013418 valve,butterfly design standard : api 609/bs 5155 type,end connection : wafer lugged service : water pressure designation : pn 16 rating,temperature : 25 deg c- 90 deg c uni/bi-directional : bi-directional type,face : raised face material,body : astm a 216 gr. wcb material,trim : astm a351 gr. cf8m material,seat : epdm material,stem : aisi 316 options : pnem. actur, mo & limit switch size : dn 100 for booster pump to emergency tank line, booster pump to gland sealing line and dewatering drum water flushing line of bf-3 inba a. technical specification: 1. reference drawing number :3303250201 b. special instructions: 1. valve is to be supplied with double acting pneumatic actuator, manual override and limit switch. 2. party has to submit 3 sets of drawings for vsp approval before manufacturing. (our drawing is for reference only) 3. the valves shall be painted as per the manufacturer standard specification. 4. the valves shall be attached with a metallic tag with details of po no,size,type and pressure rating etc. 5. test certificate shall be submitted from government/government approved laboratories only. , valve,butterfly design standard : api 609/bs 5155 type,end connection : wafer lugged service : water pressure designation : pn 16 rating,temperature : 25 deg c- 90 deg c uni/bidirectional : bi-directional type,face : raised face material,body : astm a 216 gr. wcb material,trim : astm a351 gr. cf8m material,seat : epdm material,stem : aisi 316 options : hand lever spring latch size : dn 150 for inlet/outlet of booster ) /bid number: gem/2025/b/6944446 * /dated: 02-12-2025 & & / bid document1 / 18

Central Government/Public Sector

CTN :43018479

12 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For rate contract for - 0.09 x 25 mm polyester glass sealing tape to bp25795 rev-07, in.sk 46099 rev-01 and in.sk 46094 rev 00. material to be supplied in rolls of 50 mr. qty-1600000 mr.

Central Government/Public Sector

CTN :42995262

01 Jan, 2026 NA

Koraput - Odisha

Tender For tender for supply of manufacturing and supply of parts from hal supplied raw material drawings and technology d d - sealing ring , clamp , gear , spline shaft of drive box , quill shaft , locking cup , c.i sealing ring

CTN :42999754

22 Dec, 2025 NA

Ernakulam - Kerala

Tender For tender for supply of nut con rod 16mm , pump raw water , filter fuelwater separator , screw slotted set , screw hexagon head cap , seal thermo , clamp v band , gear , cap screw , cap screw , breather element , shim plunger , manifold fuel , seal oil , clip , cap screw , lock plate , elbow male adaptor , connector male , elbow male union , gear flywheel ring , clamp t bolt , valve insert , gasket bearing support , seal rectangular ring , pencil zinc , gasket thm housing cover , seal o ring , comman for intake exhaust valve for 28 , seat bypass valve , gasket oil suc connection , element lopoint filter , bushing , plug lub oil restriction , hose elbow , ring rectangular seal , belt v , belt v , gasket filter , gasket gear housing , cap screw main brg , gasket rear cover , gasket oil pan , float , bearing ball , sleeve , gasket exch collector , seal o ring , nut accessary , link injector , damper vibration , gasket water inlet comm , shaft water pump , con rod bearings , clamp wire tie , gasket , hose , collet valve , ring retaining , cap screw , seal injector , shaft water pump , manifold exhaust , seal , tank expansion , washer plain , pulley crankshaft , seal o ring , gauge , manifold exhaust , impeller , gasket cover plate , gasket breather , breather , element fuel filter , tube water transfer , shaft idler gear , cooler lub oil , screw hex flange head cap , gasket , gasket set fuel pump , seal o ring , gasket thermostat housing , screw captive washer cap , sleeve injector , sleeve , cap screw , screw captive washer cap , elbow male union , seal rectangular ring , connector male , pulley accessory drive , screw twelve point cap , spacer mounting , seal oil , set lower engine gasket , insert value , valve shutoff , element air cleaner , body piston cooling valve , seal oil , seal oil , starter 11 teeth 24v , key offset wood ruff , valve air relay , hose plain , washer locking , washer thrust , clip , screw twelve point cap , vlave check , valve piston cooling , gasket governor housing , hose elbow , manifold exhaust , manifold exhaust , gasket connection , tee male union , retainer seal , gasket rkr lever housing , spring compression , gasket mamfold , tee male adapter , tube fuel bypass , impeller water pump , crankshaft engine , hose plain , plug injector orifice , spider jaw coupling , push rod valve , rod push , fuel tube drain , injector , nut hexagon flange , washer plain , hose plain , cover spring pack , elbow male union , gasket support 0200809 k , thermostat , gasket pkr hsg cover , block cylinder , pluge pipe , actuator ecl governor , filter fuel , element lub oil filter , inhibitor corrosion concent 5 lt , inhibitor corrosion , inhibitor corrosion premix 205 lt , seal o ring , clamp t bolt , element lub oil filter , screen filter , sea water pump

CTN :42995497

11 Dec, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of gasket eng root , hose , cup , ring , gasket , packing , rubber boot , belt b46 , boot rubber , packing ring performed , cover , gasket packing , bushing sleeve , boot , buffer , packing retainer , gasket framing , seal , cup and spring , gasket felt mech 1 , packing rh , gasket retainer , cup spring , gasket packing , pkg performed , plate gasket , gakset , seal plain , filter , protective boot , gasket special , shock absorber , casing , eye guard , ring sealing , ring gasket , o-ring , gauze filter , cap , oil seal , cleaner , sealing ring , packing material , air bottle valve , air bottle shim , filrter , hose assy rubber , hose 8mm , hose 12mm , hose 10mm , hose 14mm , hose 16mm , hose 18mm , hose 22mm , hose 25mm , hose 27mm , hose 30mm , hose 32mm , hose 42mm , hose 48mm , gasket packing , gasket , hose , packing lh , branch pipe , pin lock , ring sealing ) /bid number: gem/2025/b/6942716 * /dated: 01-12-2025 & & / bid document1 / 98

State Government

CTN :42966383

04 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator mach

Central Government/Public Sector

CTN :42972067

08 Dec, 2025 NA

Medak-T - Telangana

Tender For supply of bracket mounting aft , bracket comb chamber , gusset , pad, 10thk, 80x68 , base mounting aft , retainer seal trans pce comb , retainer seal , seal end transition piece comb , pin guide

State Government

CTN :42718791

04 Dec, 2025 70.00 Lacs

Sheopur - Madhya Pradesh

Tender For rate contract award for supply of local purchase items for operation and maintenance of various equipment and various safety material for onm divisions and stm stc division situated under general manager (o n m) mpmkvvcl circle sheopur. - rate contract award for purchase of various electrical equipment/goods, trip coil shunt 30 volt dc suitable for 33 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 33 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make shreem, trip coil shunt 30 volt dc suitable for 11 kv vcb make cgl, trip coil shunt 30 volt dc suitable for 11 kv vcb make - bhel, trip coil shunt 30 volt dc suitable for 11 kv vcb make erl, trip coil shunt 30 volt dc suitable for 11 kv vcb make alstrem, trip coil shunt 30 volt dc suitable for 11 kv vcb make schenider, trip coil shunt 30 volt dc suitable for 11 kv vcb make stelmec, trip coil shunt 30 volt dc suitable for 11 kv vcb make c&s, trip coil shunt 30 volt dc suitable for 11 kv vcb make - s&s, closing coil shunt 30 volt dc suitable for bhel make vcb, closing coil shunt 30 volt dc suitable for crompton make vcb, closing coil shunt 30 volt dc suitable for essun make vcb, closing coil shunt 30 volt dc suitable for megawin make vcb, closing coil shunt 30 volt dc suitable for stelmec make vcb, closing coil shunt 30 volt dc suitable for areva make vcb, expulsion fuse 40 amp. (t-40) for capacitor bank, expulsion fuse 60 amp. (t-60) for capacitor bank, digital clamp meter tong tester (0-750 volt ac 1000 amp. ac) make- mexo/motwane, megnatic oil gauge for power transformer (mog) 6 inc dia with lead, spring charging motor suitable for 11 kv vcb make-bhel, spring charging motor suitable for 11 kv vcb make - crompton, mfm suitable for control panel of all makes., selector switch suitable for control panel of all makes., buchholz relay(gas & oil operated) (is 3637) flenge-6 inch, gi nut bolt assorted size, tool kit with box specification having per kit 1-de spanner set of 10 pieces no. 6x7 to 24x27 2-ring spanner set of 10 pieces no. 6x7 to 24x27 3- cutting pliers (8 ) 01 no 4-nose pliers (6 ) 01 no 5-pipe wrench adjustable (12 ) 01 no. 6-hammer 01 no. 7-hexa with blade 01 no. 8-screw driver (06 ) 01 no. 9-screw driver (08 ) 01 no. 10-screw driver (10 ) 01 no 11-screw driver (12 ) 01 no 12-wrench pana 13-chisel 01 no make tapariya/venus, 11 kv insulated pull rod suitable for bhel make vcb with copper shunt, piercing connector type i for single phase/three phase suitable for 70-150 sq mm cable, raincoat(rubberisied) with cap make duckback, bamboo ladders 24 (feet) long approx having 2 to 3 dia at the bottom and 1.5 to 2.5 at top of bamboo the cross piece i.e. 16 no. step should be at a distance of approx 17 and bamboo ladder should be tightened with g.i. wire of 16 swg at least 4 places the top of ladder should be wide 35 to 40 cm and bottom 58 to 60 cm, silica gel (blue)2 to 4 mesh, breather with silica gel (blue) 2 to 4 mesh for power transformer capacity 5 kg, poly propylene rope 24mm dia make tuff rope/equivalent standered make with isi mark., smart connector suitable for m-16 ct tetminal to dog/raccoon suitable for ai alloy, cb smart clamp for dog/raccoon and panthor conductor, 30 volt dc led type indicating lamp of green/red/yellow colour, breaker control on/off switch handle type suitable for control panel make-recon/kaycee/any standard, lv brass stud complete made of brass stud with its all accessories for 200/315 kva distn. transformer one set for brass stud 300 amp shall comarion of brass stud 265x20 mm 01 no. brass hexa nut full thred-01 no., brass lock nut-02 no., brass rear nut-02no. sealing ball washer -01 (neoprene rubber washer) & brass plain whaser-02 no approximate weight 1050 gram -+5% tollarence., lv brass stud suitable for 25/63/100 kva x-mer length of rod 200mm dia 12mm, both & therder up 60 mm heaving chuck out washer & bass washer with 05 no. nut approximate weight 320 gram -+5% tollarence, 33 kv bushing

Central Government/Public Sector

CTN :42954920

08 Dec, 2025 NA

Kolkata - West Bengal

Tender For custom bid for services - miscellaneous machinery jobs for vessel ma ganga-i 20 fireline mains are to be pressure tested. the relief valve is to be overhauled and pressure tested, and the results are to be shown to the irs/mmd/iwt surveyor. leaky joints are to be renewed with new joints if required. all damaged fire line clamps are to be renewed as per the recommendation of irs/smpa. satisfactory trials is to be given with 02 nos fire hoses in fwd & aft in front of the surveyor. , 1 20.a in-situ pressure testing of fire line pipes up to 100nb 100 mtrs, 2 20.b supply of fire hose-65mm dia 18mtr length 2 nos, 3 20.c remove,refit ,overhaling & pressure testing of relief valve 1 nos, 4 20.d renewal of clamp support 50 nos, 5 20.e new sealing rings are to be provided in all fire hydrants 10 nos, 6 21 "emergency fire pump: pump is to be overhauled. suction (steel pipe size 62mm od short bend,610mm length), and delivery bend (steel pipe size 62mm od short bend with one side threaded 65mm od,610mm length), reducer, suction filter and hard polymer pipes (62mm id 75mm od, suction 12 mtr approx.) are to be renewed., *all spares for pump overhauling will be supplied by smpa." 1 l.s., 7 42 "hydrophore and air bottle: main air bottle fwd and aft outlet cocks (2 nos.) are to be renewed. safety/relief valves are to be renewed. sea water and fresh water hydrophore air charging cocks are to be renewed., **all material contractor supply" 1 l.s., 8 53 "insulation covering and netting is to be removed from the exhaust pipes for main engines and auxiliary engines for surveyors inspection and to be fitted back with new insulation and netting., **all material contractor supply, " 50 per running mtr., 9 54 "air compressor system both air bottle valve found leaking, same are to be renewed. air compressor (specification: tyco, wp-125 psi, tp--210 psi) is to be overhauled and satisfactory trial is to be shown to smpa., *** all spares smpa supply." 1 l.s, 10 55 "exhaust chimney of officer's & crew galley is to be serviced., **all material contractor supply" 2 nos., 11 3 "regarding blowers ( motors 4.1kw/5.5 hp) e/r 2 nos.. supply blower,1 no. e/r exhaust blower on boat deck (aft), its foundation & trunking is to be removed from place for cleaning, including closing arrangement. blower motor is to be overhauled. after proper alignment and balancing all blowers and trunkings, the same are to be fitted back in place. blower bottom water extraction passages are to be made. , *all material contractor supply" 3 per blower, 12 4 "regarding 2 nos.toilet exhaust blowers (motors 3 h.p.-crew and officers' toilet), their foundation & trunking is to be removed from the place for cleaning, including closing arrangement. blower motor is to be overhauled. after proper alignment and balancing all blowers and trunkings,same are to be fitted back in place. blower bottom water extraction passages are to be made. , *all material contractor supply" 2 per blower.

Retainer Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors